AlvarezメーカーN/Aの使用説明書/サービス説明書
ページ先へ移動 of 15
1 S225 REPAIR MANUAL S225 REPAIR MANUAL.
2 These instructions are intended to help restore any ailing S225 Passive Loudspeaker back to factory working conditions. They show how to remove and replace the drivers. Please contact Mackie Technical Support (1-800-898-3211) to receive a Service Request Number and Order Number for parts needed for this restoration.
3 Bottom woofer replacement: 1 1 Five screws need to be removed from each side of the grill (ten screws total) using the phillips head screwdriver. A fl at head screwdriver may aid in loosening the grill if it is sticking. 8 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 9 9 10 10 2 2 Keep the ten screws in a safe place.
4 4 4 Carefully begin to remove the woofer. This woofer has a tendency to want to pop out, so please be sure to hold the woofer in place with your free hand while removing the screws with the other hand. Caution: The woofer is approximately 10 pounds with the weight unevenly distributed.
5 6 6 The picture above shows what the S225 looks like with the grill and bottom woofer removed. Place the new woofer (part #0010658) where the old one was. Follow the same steps as above, but backwards 5 to 1. Power up the S225 and the new woofer should now be pumping out glorious lows.
6 Top woofer replacement: 1 1 Five screws need to be removed from each side of the grill (ten screws total) using the phillips head screwdriver. A fl at head screwdriver may aid in loosening the grill if it is sticking. 8 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 9 9 10 10 2 2 Keep the ten screws in a safe place.
7 Top woofer replacement continued: 4 4 Carefully begin to remove the woofer. This woofer has a tendency to want to pop out, so please be sure to hold the woofer in place with your free hand while removing the screws with the other hand. Caution: The woofer is approximately 10 pounds with the weight unevenly distributed.
8 Top woofer replacement continued: 6 6 The picture above shows what the S225 looks like with the grill and top woofer removed. Place the new woofer (part #0010658) where the old one was. Follow the same steps as above, but backwards 5 to 1. Power up the S225 and the new woofer should now be pumping out glorious lows.
9 High Frequency Driver replacement: 1 1 Five screws need to be removed from each side of the grill (ten screws total) using the phillips head screwdriver. A fl at head screwdriver may aid in loosening the grill if it is sticking. 8 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 9 9 10 10 2 2 Keep the ten screws in a safe place.
10 4 4 Carefully begin to remove the entire horn assembly (with the high frequency driver still attached). A fl at head screwdriver may aid in loosening the horn assembly by prying between it and the cabinet. Hold the horn assembly in place with one hand while prying around the edge with your free hand.
11 High Frequency Driver replacement continued: 7 7 Four nuts and eight washers may be removed from the driver using the 8mm open end wrench. Turn counter- clockwise to loosen and remove, clockwise to tighten. The other three are located around the horn assembly.
12 High Frequency Driver replacement continued: 10 10 This is what the high frequency driver looks like removed from the horn assembly. Four headless screws need to be removed from the driver. Pliers could help if the screws are too tight. Turn counter- clockwise to loosen and remove, clockwise to tighten.
13 3 3 The horn assembly is shown above with the high frequency driver circled. Four screws need to be removed from the driver using the 3mm allen wrench. 4 4 Keep the four screws in a safe place. 5 5 The diaphragm and plate adapter are easily removed from the horn assembly.
14 7 7 This is what the plate adapter (left) and diaphragm (right) both look like. Place the new diaphragm (part # coming soon) where the old one was. Follow the same steps as above, but backwards 6 to 1. Power up the S225 and the new diaphragm should now be pumping out those highs again.
15 This page left blank intentionally.
デバイスAlvarez N/Aの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Alvarez N/Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAlvarez N/Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Alvarez N/Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Alvarez N/Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Alvarez N/Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAlvarez N/Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Alvarez N/Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAlvarez N/Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。