GefenメーカーEXT-HD-PVRの使用説明書/サービス説明書
ページ先へ移動 of 53
High-Def Personal Video Recorder User Manual www .gefentv .com GTV -HD-PVR.
ASKING FOR ASSIST ANCE T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday PST (Paci fi c Standard T ime) Write T o: Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .
T ABLE OF CONTENTS 1 Introduction / Operation Notes 2 Features / Package Includes 3 Panel Layout 4 IR Remote Layout 5 Quick Start Guide 6 Home Menu And Navigation 8 Setting Up The HD-PVR 14 One-T ouch.
INTRODUCTION OPERA TION NOTES READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE HD PERSONAL VIDEO RECORDER • Compatible with both HDMI and DVI* displays. • Copy protected content cannot be recorded or copied in high-de fi ntion to the HD-PVR or to SD fl ash media.
FEA TURES FEA TURES • Video recording and playback at resolutions of 480i to 1080i • Instant Recording to SD Flash Media or Internal Hard Disk Drive • Uses widely supported MPEG4 compression and H.264 encoding technology , supported on most computers with an add-on driver .
P ANEL LA YOUT 3 S/PDIF OUT COMPONENT INPUT ANALOG INPUT COMPOSITE INPUT S-Video INPUT ANALOG INPUT IR EXTENDER IR BLASTER HDMI OUT S/PDIF IN 1 HDMI IN 1 S/PDIF IN 2 HDMI IN 2 INPUT LED INDICA TOR SD .
IR REMOTE LA YOUT 4 TV Power User programmable key HDMI 1 Selects HDMI input 1 HDMI 2 Selects HDMI input 2 Component Selects the Component input Repeat Cycles the repeat function Info Displays info on.
QUICK SETUP GUIDE 5 How to connect the HD-PVR: 1. Connect the HDMI OUT of the HD-PVR to the HDMI IN of your HDMI display . 2. Connect the HDMI, Component, Composite or S-Video input, on the Gefen HD-PVR to the output of the source device you wish to record from.
HD-PVR HOME MENU AND NA VIGA TION HOME MENU 6 This is the HOME menu. From here, you can view recorded content, view photos, set up preferences or view the input source by selecting EXIT or pressing HOME on the remote control. Navigation T o navigate through the menu system, use the and directional keys on the remote.
HD-PVR HOME MENU AND NA VIGA TION HOME MENU - Panel Description 7 Exit Exits the HOME menu, allowing you to view the input source. Setup Utilities All con fi gurable options are located in this menu. Please see the next section for individual descriptions and setup of each option.
SETUP UTILITIES The SETUP UTILITIES menu allows you to con fi gure the HD-PVR for use. There are three pages of settings. Use to highlight the selection and press to accept the current selection. Set Date & Time Set the current date and time. Set Language Choose the language option that will be used for all menus.
SETTING UP THE HD-PVR SETUP UTILITIES - Set Date 9 Use to move between each digit in the date and to change the numbers. Pressing will set the date and proceed to the SET TIME screen SETUP UTILITIES - Set Time Use to move between each digit in the time and to change the numbers.
SETTING UP THE HD-PVR SETUP UTILITIES - Format 10 This provides you the option of formatting the internal hard disk drive (HDD) or SD Card. W arning: Formatting the internal HDD or SD Card will erase ALL data on the media! SETUP UTILITIES - Set Language T o set the language, use to select the language and press to accept the selection.
SETTING UP THE HD-PVR SETUP UTILITIES - OSD Time-out 11 This controls the time that the information panel is displayed when viewing movies or photos. Y ou can choose between 1, 3 or 5 seconds. Use to choose your desired setting and press to accept it.
SETTING UP THE HD-PVR 12 SETUP UTILITIES - Background The background menu lets you choose between two images that will serve as the backdrop for all menu screens. Use to choose either background and press select it. Quality HD Bit Rate HD Record Time SD Bit Rate SD Record Time Extra Fine (EX) 10Mb 17 Hours 4Mb 44 Hours Normal (NOR) 7.
SETTING UP THE HD-PVR SETUP UTILITIES - Free Space / T otal Space 13 The information menu will give you statistics on the remaining and total space available on both the internal hard disk drive (HDD) and SD card.
ONE-TOUCH RECORDING The HD-PVR allows you to instantly record programs while your watching them, using the one-touch record feature. T o use the one-touch record feature, using the RECORD button, do the following: 1. From the HOME menu, press the HOME button on the remote to view the currently selected source.
During the recording process, you can get information about the current recording by pressing the INFO button while you are recording. After pressing the INFO button you should see the following infor.
Y ou can press the INFO button again to hide the recording information. NOTE: The recording information screen will not show up when you playback your recorded movies.
ONE-TOUCH RECORDING 17 Use on the remote to select either Y es or No and press . Selecting No will continue the recording process. Selecting Y es will stop the recording process and save the movie to the currently selected media. Note that even though this dialog is displayed, the recording process is still taking place.
Play Once Single Repeat Repeat All Pressing the REPEA T button will cycle through these options as shown above. REPEA T The repeat function can be changed either in the menu or during a playback.
PLA YING A MOVIE P AUSE The P AUSE function is used to pause a movie during playback. Y ou can then use the Step FWD function, mentioned earlier , to progress through the movie frame- by-frame. SNAPSHOT Y ou can take snapshots of individual frames of a movie with the SNAPSHOT button.
PLA YING A MOVIE From the Home Menu, choose Play Movie with and press . Resolution Page File Name Recording Quality Runtime HD or SD Recording Icon T o navigate the PLA Y MOVIE menu, use and to make your choice and press the PLA Y button to start playback.
PLA YING A MOVIE The Movie Menu allows you to begin playback, copy , or delete the selected movie. Use to select your choice and press to select it. 21 MOVIE MENU MOVIE INFORMA TION - Panel Descriptio.
The Schedule List menu displays all scheduled recordings. Once a recording is complete, the entry is removed from the list. Scheduled recordings labeled with a are active recordings. SCHEDULING A RECORDING RECORD SETUP - Schedule List 22 From the home menu use to select Record Setup and press .
RECORD SETUP - Panel Description SCHEDULING A RECORDING RECORD SETUP - Set Date 23 Set the date for the recording using to change each digit. Use to move to another digit.
SCHEDULING A RECORDING RECORD SETUP - Set Length 24 RECORD SETUP - Set Start Time Set the time for when you want the recording to begin. Use to change the numbers and use to move between the digits. Press when you are done. Set the time for when you want the recording to begin.
SCHEDULING A RECORDING RECORD SETUP - Set Media 25 RECORD SETUP - Set Source Set the input source for the recording using to select between HDMI1, HDMI2, COMPONENT or VIDEO. Press when you are done. Set the media for the recording using and press when you are done.
SCHEDULING A RECORDING 26 RECORD SETUP Once you have input all of the information for the recording it should already be set as active. T o de-activate the recording for any reason, navigate to it using and simply press the key on the remote. T o re-activate it press again.
VIEWING PHOTOS 27 From the home menu use to select View Photo and press . Folder Path Page Selected Media Folder Name Folder Menu - Description.
VIEWING PHOTOS 28 Photo Selection Menu Navigate the photos with and . Y ou can start a slide show at any time by pressing the PLA Y button on the remote. T o view a single photo, press to bring up the Photo Menu, select View Photo with and press . Folder Menu - Main The Folder Menu displays the current folders located on the selected media.
VIEWING PHOTOS 29 Photo Selection Menu - Photo Menu The Photo Menu will allow you to view a single photo, delete the selected photo, or delete all the photos on the selected media. Use to choose your option and press to select it. While viewing a single photo, you may move to the next photo in the folder by pressing on the remote.
COPYING/DELETING MOVIES AND PHOTOS 30 Copying Navigate to the desired movie or photo using the instructions in the Play Movie or View Photo section. Pressing will bring up the additional menu where the COPY command is located.
VIEWING PHOTOS ON THE SD-CARD 1. Remove the SD-Card from your digital camera and insert it in the HD-PVR SD- Card slot. 2. Press the HDD/SD button on the remote to make the SD-Card the active storage media.
32 If this happens, you will need to tell the HD-PVR where the photos are stored. Most digital cameras use the DCIM folder for storing digital photos. By default, the HD- PVR will always look in the PICT folder for images. T o tell the HD-PVR to view another folder , do the following: 1.
In our example, our photos are stored in a folder called “101_P ANA”. As you can see, the HD-PVR always tells us where we are: The text in the upper-left corner tells us what folder we are viewing (in this case, the DCIM folder) and the text in the lower-right corner tells us what folder we have highlighted.
34 Once you are in thumbnail view , you can press the HOME button on the remote control to return to the HOME menu. Y ou can also press the STOP button to move up one level in the folder hierarchy . In our example, pressing STOP will return you to the DCIM folder .
LEARN REMOTE & RESET REMOTE 35 The Gefen HD-PVR remote has a number of user con fi gurable keys that can be programmed with IR codes from other devices. The IR codes are transmitted through the IR blaster on the back of the unit. This feature allows you to control your other devices using the HD-PVR remote.
INST ALLING THE DECODER SOFTW ARE The Gefen HD-PVR includes decoder software which allows you to play your recorded movies on your computer . NOTE: The installer only installs decoder software. Y ou will still need a program such as Windows® Media Player to play video fi les from the HD-PVR.
Y ou must agree to the terms of the software license agreement before installation can continue. If you do, click “I accept the terms of the license agreement” and click Next. On the Customer Information screen, enter your name, company name and serial number .
If you make a mistake entering the serial number , the installation program will notify you. If this happens, click OK and you will be returned to the Customer Information screen. Make sure there are no spaces in the serial number and that you type the serial number exactly as it appears on the CD jacket.
This screen will show you the progress of the installer as it installs the necessary fi les. After all fi les have been installed, you have the option of using Microsoft® Windows Media Player to view all .mov fi les. If you want to do this, click the Y es button.
After the installation completes, you will need to restart your computer before you can playback any movies that were recorded with your HD-PVR. Click Y es then click Finish to restart your computer now . Click No then click Finish to restart your computer at a later time.
41 UPDA TING THE HD-PVR FIRMW ARE Updating the fi rmware on your Gefen HD-PVR is a simple process. If a new version of fi rmware is released, simply download the fi le and follow the procedure outlined below . Y ou will need an SD-Card to update your HD-PVR.
42 RS-232 SERIAL COMMUNICA TION NOTE: A null modem cable is needed for proper operation of the RS-232 serial control. A null modem cable will internally cross the Tx and Rx lines. Please see the above diagram for a typical null model pinout. RS232 Settings Bits per second .
43 RS-232 SERIAL COMMUNICA TION Starting RS-232 Operation • If there is no valid source connected to HD-PVR, the unit will keep searching for signal and make the HyperT erminal screen scrolling continuously (sending the messages.) T o start the RS-232 control, use the “HOME” button on the remote unit to make it stop sending message.
44 RS-232 SERIAL COMMUNICA TION • T ype in any UART command and press the “Enter” button on the keyboard of the PC, after the “a:>” prompt to execute it. • For example, type in “t app 0x61773002” and press “Enter” to change the input selection to HDMI 2, as shown below .
45 RS-232 SERIAL COMMUNICA TION STEP t app 0x61773007 1 t app 0x61772000 2 t app 0x61772001 3 t app 0x61772002 4 t app 0x61772003 5 t app 0x61772004 6 t app 0x61772005 7 t app 0x61772006 8 t app 0x617.
Digital Video Ampli fi er Bandwidth .............................................................165 MHz Component Video Bandwidth ....................................................................350 Mhz Input DDC Signal ..........................
DDC Short form for Display Data Channel. It is a VESA standard for communication between a monitor and a video adapter . Using DDC, a monitor can inform the video card about its properties, such as maximum resolution and color depth.
48 W ARRANTY G e f en warrants the equipment it manu f actures to be f ree f rom de f ects in material and workmanship. I f equipment f ails because o f such de f ects and G e f en is noti fi ed with.
.
20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefentv.com support@gefen.com Rev A2 *ma-HD-PVR*.
デバイスGefen EXT-HD-PVRの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Gefen EXT-HD-PVRをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGefen EXT-HD-PVRの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Gefen EXT-HD-PVRの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Gefen EXT-HD-PVRで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Gefen EXT-HD-PVRを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGefen EXT-HD-PVRの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Gefen EXT-HD-PVRに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGefen EXT-HD-PVRデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
