GN NetcomメーカーGN 6110の使用説明書/サービス説明書
ページ先へ移動 of 18
2 English – GN 6110 user guide This user guide provides you with information on setting up, using and maintaining your GN 6110. CONTENTS 1. Product information 1.1 GN 6110 – what’s in the box 1.2 Parts and signatures 2. Assembling your GN 6110 2.
3 1.1 GN 6110 – What’s in the box 1 GN 6110 headset, with built-in rechargeable battery 2 GN 6110 base (connectivity unit) 3 Connection cord for telephone connection 4 Power adapter with cord 5 Quick Set Up guide 6 User guide 7 Cord management strips 8 Headset travel charger (90-240 V) 1.
4 2. Assembling your GN 6110 First assemble your GN 6110 to work with your desk telephone, and then set it up to work with your mobile phone. The GN 6110 supports the GN 1000 Remote Handset Lifter for desk telephones. See Section 4.3 for hook switch set up instructions and use.
5 Pairing of headset to the base and verifying pairing The headset and the base in their original product box have been factory-paired to ensure proper functioning of your GN 6110. You do not need to pair these two devices, and you may now proceed to the Clear dial tone adjustment section.
6 2.2 Setting up for mobile telephone use The GN 6110 headset is also compatible with Bluetooth mobile phones. The mobile phone you use with your GN 6110 must be Bluetooth technology-equipped.
7 Turning headset OFF: Close the headset boom arm. The headset indicator lights for 2 seconds, after which it will turn off. Making calls: 1. With the boom arm open, press the Multifunc- tion Button on either the headset [C] or the base [B] . An audible tone will be heard and the con- nection will be established shortly.
8 3.2 Operation – with mobile telephone If your headset is in its base, press the release headset button to free the headset before using it. Turning headset ON: Open the headset boom arm. The headset indicator lights for 2 seconds, and then continue to fl ash slowly as long as the headset is on.
9 Headset <-- --> mobile phone switching (while on a call). To switch from using the headset to mobile phone during a call: 1. Terminate the link between the headset and the mobile phone by closing the headset boom arm [A] Note: do not press the Multifunction Button.
10 You will need to make 2 calls to adjust the volume match, one using your mobile phone and the other using the desk telephone. 1. Open the compartment cover on the bottom of the base and locate the black volume match button [A] 2.
11 To connect your GN 1000 to the GN 6110, complete the following: 1. Connect the GN 1000’s connector cord to the yellow-marked hook switch [AUX] socket on the bottom of the base [A] .
12 2. You may continue wearing your headset, or replace the (closed) headset boom arm in the base for charging. Headset <-- --> handset switching (while on a call) To switch from using the headset to the handset during a call: 1. Pick up the telephone’s handset [A] .
13 Battery charge indication The headset indicator lights to indicate charging, and will turn off when fully charged. The 4 lights of the battery indicator show the approximate battery charge level of the headset: • 1 lit indicator represents 25% of a full charge (will fl ash if less than 25%) • 4 lit indicators represent a full charge.
14 Successful pairing will be indicated by 10 rapid fl ashes of both the headset indicator and the pairing indicator. A beep will also be heard in the headset. Verifying pairing To verify pairing, create an audio link between the headset and base by completing the following: 1.
15 The headset’s audio indicators: Headset action Audio indication Volume Limit Repeated single high tone when min. or max. limits achieved (when button is pressed) Low Battery Tone Two rapid high t.
16 Base’s multifunction indicator Multifunction indicator Battery indication Number of lit indicators indicates level of charge 1 fl ashing indicator < 25% charged 1 lit indicator = 25% charged .
17 What is the clear dial tone adjustment for? Desk telephones operate on a wide range of standards and use different kinds of internal compo- nents. The GN 6110 works with a very wide range of desk telephones, but it still must be set to match your desk telephone’s standard.
18 Declaration This product is CE marked according to the provisions of the R & TTE Directive (99/5/EC). Hereby, GN Netcom as declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
19 5. If the telephone company requests information on what equipment is connected to their lines, inform them of: (a) The telephone number that this unit is connected to.
デバイスGN Netcom GN 6110の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
GN Netcom GN 6110をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGN Netcom GN 6110の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。GN Netcom GN 6110の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。GN Netcom GN 6110で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
GN Netcom GN 6110を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGN Netcom GN 6110の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、GN Netcom GN 6110に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGN Netcom GN 6110デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。