Gracoメーカー96A637の使用説明書/サービス説明書
ページ先へ移動 of 30
Instructions – Parts List GRACO INC.ąP .O. BOX 1441ąMINNEAPOLIS, MNą55440-1441 Copyright 2002, Graco Inc. is registered to I.S. EN ISO 9001 W ALL MOUNT OR FLOOR ST AND 4:1 Ratio, Glutton r Circulation Packages For heavy–duty , medium–volume circulation of fluids.
2 310564 T able of Contents List of Models 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W arnings 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Component Identification 5 . . . . . . . . . . . .
310564 3 Symbols W arning Symbol W ARNING This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions. Caution Symbol CAUTION This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.
4 310564 W ARNING MOVING P ARTS HAZARD Moving parts, such as the air motor piston, can pinch or amputate your fingers. D Keep clear of all moving parts when starting or operating the pump. D Before servicing the equipment, follow the Pressure Relief Procedure on page 10 to prevent the equipment from starting unexpectedly .
310564 5 Component Identification TI0957 Fi g . 1 Model 96A637 Shown KEY A Pump Inlet B Fluid Gauge and Dampener C Fluid Gauge Ball V alve D Fluid Filter E Filter Ball V alve F Fluid Drain V alve G Ai.
6 310564 Setup W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 10. Site Preparation Fig. 1. Relieve system pressure. For installing any one of the packages listed in this manual, select a site with at least 5 ft (1.
310564 7 Setup W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 10. W all Mount installation of the Circulation Package Fig. 1. The circulation package consists of the pump mounted on the wall mount frame.
8 310564 Setup Connect the Fluid Lines Fig. 1. Connect system fluid supply line to the circula- tion package at fluid supply inlet (A). Close filter ball valves (E) to isolate the circulation package from the main fluid supply line. Connect circulation package to the system fluid return line at fluid return outlet (T).
310564 9 Setup Grounding W ARNING FIRE AND EXPLOSION HAZARD Before operating the circulation pack- age, ground the system as explained below . Also read the section FIRE AND EXPLOSION HAZARD on page 4. 1. Pump: use the ground wire and clamp (A, sup- plied).
10 310564 Operation Pressure Relief Procedure W ARNING PRESSURIZED EQUIPMENT HAZARD The system pressure must be manually relieved to prevent the system from starting or spraying acci- dentally .
310564 11 Operation TI0957 Fi g . 4 Model 96A637 Shown Side View 23 Ref 5 14 Ref BB AA CC DD W Y 23 14.
12 310564 Operation Starting and Adjusting the Pump 1. Fig. 4. Open all fluid shutoff valves (5–two). Make sure Air Regulator (CC) is fully closed. 2. Open the spray gun at the last gun station and keep it open while starting the pump. 3. Open the bleed-type master air valves (W , AA).
310564 13 Maintenance Preventive Maintenance Schedule The operating conditions of your particular system determine how often maintenance is required. Estab- lish a preventive maintenance schedule by recording when and what kind of maintenance is needed, and then determine a regular schedule for checking your system.
14 310564 Maintenance Air Filter Service 1. Fig. 4. Every day , drain contaminants from the bowl before reaching the baffle level by opening the drain at the bottom of the bowl (BB). W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 10.
310564 15 T roubleshooting W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure (page 10).
16 310564 Parts Right Hand Mount Model: 96A637 4:1 Ratio, Glutton Pump TI0957 11 13 14 14 5 4,3 24 5,4,3 14 19 53,21,20 12,4,3 22 13 51 7 35 50 36 45 43 4,3,2 1 15 16 17 23 3,4 14 Ref Ref 5 Detail A D.
310564 17 Parts Right Hand Mount Model: 96A637 4:1 Ratio, Glutton Pump Ref Part No. No. Description Qty Ref Part No. No. Description Qty 1 618216 FRAME, wall/floor stand mount 1 2 618217 MANIFOLD, sur.
18 310564 Parts Left Hand Mount Model: 96A638 4:1 Ratio, Glutton Pump TI0958 11 13 14 14 5 3,4 24 3,4,5 14 19 20,21,53 3,4,12 22 13 51 7 35 50 36 45 43 2,3,4 1 15 16 17 23 3,4 14 Ref 5 Ref Detail A De.
310564 19 Parts Left Hand Mount Model: 96A638 4:1 Ratio, Glutton Pump Ref Part No. No. Description Qty Ref Part No. No. Description Qty 1 618216 FRAME, wall/floor stand mount 1 2 618217 MANIFOLD, surg.
20 310564 Parts Right Hand Mount Dual Filter Model: 96A938 4:1 Ratio, Glutton Pump TI0959 11 13 14 14 5 4,3 24 5,4,3 14 19 53,21,20 12,4,3 22 13 51 7 35 50 36 45 43 4,3,2 1 15 16 17 23 3,4 14 Ref Ref .
310564 21 Parts Right Hand Mount Dual Filter Model: 96A938 4:1 Ratio, Glutton Pump Ref Part No. No. Description Qty Ref Part No. No. Description Qty 1 618380 FRAME, wall/floor stand mount, rh 1 2 6182.
22 310564 Parts Left Hand Mount Dual Filter Model: 96A939 4:1 Ratio, Glutton Pump TI0960 11 13 14 14 5 3,4 24 3,4,5 14 19 20,21,53 3,4,12 22 13 51 7 35 50 36 45 43 2,3,4 1 15 16 17 23 3,4 14 Ref 5 Ref.
310564 23 Parts Left Hand Mount Dual Filter Model: 96A939 4:1 Ratio, Glutton Pump Ref Part No. No. Description Qty Ref Part No. No. Description Qty 1 618381 FRAME, wall/floor stand mount, lh 1 2 61821.
24 310564 Parts Single Mount Floor Stand, Model 618613 Model 618613 9/16 in. (4) places 3/8 in. (8) places TI0999.
310564 25 Parts Dual Mount Floor Stand, Model 618314 Model 618314 9/16 in. (4) places 3/8 in. (8) places TI1000.
26 310564 T echnical Data 4:1 Ratio Glutton Pumps Category Data Maximum Fluid Working Pressure 2.4 MPa, 24.5 bar (350 psi) Air Operating Range 0.17–0.6 MPa, 1.7 – 6.2 bar (25 – 90 psi) Fluid Flow at 60 Cycles per Minute 21.2 liter/min (5.6 gpm) Cycles Per Liter (gallon) 2.
310564 27 Notes.
28 310564 Dimensions Mount the circulation package so the top of the bracket is 5 to 6 ft (1.5 to 1.8 m) above the floor . 1 Ensure that there is 5 ft (1.5 m) overhead clearance for wall mounted systems and at least 7 ft (2.1 m) for floor mounted systems.
310564 29 Mounting Hole Layout 1 Check th at th e wal l fr ame is level before bolting it to the wall. 2 Mount the wall frame so the top edge is 5 to 6 ft (1.5 to 1.8 m) above the floor . 2 27.0 in. (685.8 mm) W all Frame 618313 1 3/8 in. (8) places 0.
30 310564 Graco Standard W arranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use.
デバイスGraco 96A637の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Graco 96A637をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGraco 96A637の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Graco 96A637の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Graco 96A637で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Graco 96A637を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGraco 96A637の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Graco 96A637に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGraco 96A637デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
