Harman KardonメーカーBDS 277BQ/230-B2の使用説明書/サービス説明書
ページ先へ移動 of 74
Blu-ray Disc ™ receive r BDS 275/BDS 575/ BDS 277/BDS 577 Owner’s Manual.
2 BDS BD/DVD Region Codes and T able of Contents INTRODUCTION 3 VERIFY LINE VOL T AGE BEFORE USING 3 UNP ACKING 3 INST ALLA TION LOCA TION 3 CLEANING 3 MOVING THE RECEIVER 3 SUPPLIED ACCESSORIES 3 REC.
3 BDS Introduction, Verify Line V oltage Bef ore Using, Unpacking, Installation Location, Cleaning, Moving the Receiver , and Supplied Accessories Introduction Please register your product on our Web site at www .harmankardon.com. Note: Y ou’ll need the product’ s serial number .
4 BDS Receiver Front-Panel Controls Receiver Front-P anel Controls Eject Button On/Standby Indicator Volume Control/ Power Button USB Port Headphone Connector Information Display Disc Slot.
5 BDS Receiver Front-Panel Controls Eject button (appears only when a disc has been inserted): T ouch this button to eject a disc from the BDS receiver’s built-in disc player. Before touching this button, make sure no objects are blocking the disc-slot opening.
6 BDS Receiver Rear -Panel Connections Receiver Rear -Panel Connections Main Power Switch AC Power Connector Component Video Input Connector HDMI Input Connectors Network Connector HDMI Monitor Out Co.
7 BDS Receiver Rear -Panel Connections NOTE: See the Connections section, on page 10 , for detailed information about making connections. Main Power switch: This mechanical switch turns the BDS receiver’s power supply on or off.
8 BDS Remote Control Functions Remote Control Functions Power Button Eject Button Source Buttons Display Button Back Button Cursor Buttons Options Button Thumbnail (Y ellow) Button Zoom (Blue) Button .
9 BDS Remote Control Functions Power button: Pressing this button toggles the BDS receiver between the On and Standby modes. NOTE: If the receiver goes for 30 minutes without receiving an audio signal or a user command, it will automatically enter the standby mode to conserve electrical power .
10 BDS Connections Connections CAUTION: Before making any connections to the BDS receiver , ensure that the receiver’ s AC cord is unplugged from the receiver and the AC outlet. Making speaker connections with the receiver plugged in and turned on could damage the speakers.
11 BDS Connections Connecting a TV or Video Display Use the supplied HDMI cable to connect the BDS receiver’ s HDMI output to your TV/video display’ s HDMI input.
12 BDS Connections Connecting Y our Coaxial Digital Audio Source Device If one of your non-HDMI source devices has a coaxial digital output, connect it to the receiver’ s Coaxial Digital Input connector . NOTE: Make only one type of digital connection (HDMI, optical or coaxial) from each device.
13 BDS Connections and Preparing the Remote Control Connect the Remote IR Input The BDS receiver is equipped with a Remote IR Input connector that lets you remotely control the receiver when you place it inside a cabinet or in a location that is out of the line of sight of the remote control.
14 BDS Preparing the Remote Control 4 . Aim the remote towards the component you just turned on and enter a set-up code number from Step 1, above. Use the Program (Red) button for the first digit; the Bookmark (Green) button for the second digital; the Thumbnail (Y ellow) button for the third digit; and the Zoom (Blue) button for the last digit.
15 BDS Preparing the Remote Control and Setting Up the Receiver 1 . Press and hold the source button for the main device the remote will be operating. The button will light up, go dark and then light up again. Release the button. 2 . Select the type of punch-through programming.
16 BDS Setting Up the Receiver Press the OK button and the TV-resolution screen will appear . Initial Setup Please select the highest resolution that your TV supports.
17 BDS Setting Up the Receiver BD-Live Storage: When you select the BD-Live features from a disc’ s menu, you may be able to download additional content or other information via the Internet (through the BDS receiver’ s Network connection) and onto a memor y device inserted into the receiver’ s USB port.
18 BDS Setting Up the Receiver Video Processing: This option allows you to set the BDS receiver’ s internal video processing. Video Mode: This setting lets you select a preset video-processing option to optimize the picture for the current program by adjusting the brightness, contrast, color and sharpness: • Standard: Neutral control settings.
19 BDS Setting Up the Receiver 6 . Remain silent while the test noise plays through the speakers. As the test noise circulates among the speakers the screen will show which speaker is being tested. EzSet/EQ automatic setup can calibrate the BDS system and configure loudspeaker parameters automatically to get the best sound performance.
20 BDS Using the Receiver Using the Receiver NOTE: Before using your new BDS receiver , be sure to set the speaker distances, as explained in Audio Settings: Speaker Settings , on page 18.
21 BDS Using the Receiver 7 . Press the Back button twice to return to the speaker setup screen (the front left and front right speakers will still be highlighted). T o adjust the volume of a different speaker , use the cursor buttons to highlight it and press the OK button.
22 BDS Using the Disc Player Using the Disc Player Disc Handling Precautions • T o keep the disc clean, handle the disc by its edge. Do not touch the surface. • Do not stick paper or tape on the disc. If there is glue (or a similar substance) on the disc, remove the substance completely before using the disc.
23 BDS Using the Disc Player and Playing Streaming Media via Y our Home Network Display button: When playing Blu-ray Disc recordings and DVDs, pressing the Display button toggles the information bar on and off.
24 BDS Streaming Media via Y our Home Network, Listening to Y our iPod/iPhone/iPad and Listening to FM Radio, Before you can access files located on other devices via DLNA, each device must first give permission to share files with the BDS receiver .
25 BDS Listening to Audio Sources, Listening to Media via AirPlay and Playing Files from USB Devices and Data Discs Listening to Audio Sources Press the Aux button on the remote control. The receiver will switch to the audio input that was selected last.
26 BDS Playing Files from USB Devices and Data Discs The screen will then show the device’ s file structure. Selecting a folder will show all files of the selected type of media in the folder . If there are files of the selected type in the device’ s root directory , they will also be shown.
27 BDS Playing Files from USB Devices and Data Discs and Using Playlists If a selected MP3 file has an album cover -art ID3 tag, the art will be displayed on the screen.
28 BDS T roubleshooting T roubleshooting If your BDS receiver isn’t performing the way you think it should, check to see if the problem is covered in this section before calling your Harman Kardon dealer .
29 BDS Aux Component Remote-Control Code List Aux Component Remote-Control Code List TV/DVR Manufacturer Code Numbers A MARK 0132 0122 1088 1105 ACER 0143 1167 ADMIRAL 0192 1105 1088 1023 ADVENT 0151 .
30 BDS Aux Component Remote-Control Code List TV/DVR Manufacturer Code Numbers DIGIFUSION 1184 DIGITREX 1192 DISH NETWORK 0188 2012 DIXI 1022 DORIC 1029 DUMONT 1201 1199 1096 1088 1023 DUMONT -FINLUX .
31 BDS TV/DVR Aux Component Remote-Control Code List Manufacturer Code Numbers INTERVISION 1121 1115 1119 1114 1118 1113 1117 1111 1116 ISIS 1186 ITT 1100 1092 1046 1040 ITT -NOKIA 1100 1092 1058 1040.
32 BDS Aux Component Remote-Control Code List TV/DVR Manufacturer Code Numbers NOBLEX 1204 1205 NOKIA 1100 1092 1046 1040 NORDMENDE 1094 1056 1009 1093 1053 1080 1024 1069 1019 1059 1017 OKI 1045 1049.
33 BDS Aux Component Remote-Control Code List TV/DVR Manufacturer Code Numbers SONY 0212 0031 1103 1062 1006 0194 0028 1102 1043 1172 0136 0060 1091 1038 1173 0130 0093 1065 1016 1174 0117 1106 1064 1.
34 BDS Aux Component Remote-Control Code List CABLE BOX Manufacturer Code Numbers ABC 3011 3001 ALLEGRO 3111 AMERICAST 3212 AMINO 3015 4031 ARCHER 3112 BELCOR 3113 BT CABLE 4007 CABLE ST AR 3113 3033 .
35 BDS Aux Component Remote-Control Code List CABLE BOX Manufacturer Code Numbers TFC 3122 TIMELESS 3123 TIVO 3029 3030 4029 4030 TOCOM 3205 3170 TUDI 4027 UNITED CABLE 3011 4001 UNIVERSAL 3113 3042 3.
36 BDS Aux Component Remote-Control Code List SA TELLITE TUNERS Manufacturer Code Numbers MEMOREX 5153 METZ 6090 MINERV A 6090 MITSUBISHI 5007 6090 MOTOROLA 5012 5019 MUL TIST AR 6080 NEC 6073 6046 60.
37 BDS Specifications BDS 577, BDS 575, BDS 277 and BDS 275 Receivers Audio Section Continuous average power , stereo model: 65 watts per channel, 20Hz – 20kHz, @ <1.0% THD, both channels driven into 6 ohms Multichannel power (BDS 575/BDS 577 only): 65 watts per channel, 20Hz – 20kHz, @ <1.
HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA 516.255.4545 (USA only) Made in P.R.C. © 2012 HARMAN International Industries, Incorporated. All rights reserved. Harman Kardon is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
.
.
.
.
.
.
.
.
.
.
.
.
2-27 Preparation before Use Loading Envelopes 5 envelopes may be loaded in the multi purpose tray . Acceptable envelope sizes are as follows. Switching to Envelop Mo de (FS-2100D/FS-2100DN) T o print on an envelope, follow the proc edure below to switch to envelope mode.
.
.
.
.
.
.
Printi ng 3-4 Registering a p age size When cardstock or an envelope is loaded in the Multi Purpose Tr ay , set the paper size and type and then register the paper size on the Basic tab of the print settings screen in the printer driver . Once registered, the paper size can be selected from the Page Size menu.
.
.
.
.
.
.
.
.
.
.
.
.
.
Operation Panel 4-10 Report Print Prints a report. The options available in the Report Print menu are as follows: • Menu Map (Printing a menu map)...4-10 • S tatus Page (Printing a printer's status page)...4-12 • Font List (Printing a list of the printer's fonts).
.
Operation Panel 4-12 St atus Page (Print ing a printer's st atus p age) Y ou can check the printer's current status and option settings by printing a status page. 1 In the Report Print menu, press U or V to select Stat us Page . 2 Press [OK] .
デバイスHarman Kardon BDS 277BQ/230-B2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Harman Kardon BDS 277BQ/230-B2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHarman Kardon BDS 277BQ/230-B2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Harman Kardon BDS 277BQ/230-B2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Harman Kardon BDS 277BQ/230-B2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Harman Kardon BDS 277BQ/230-B2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHarman Kardon BDS 277BQ/230-B2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Harman Kardon BDS 277BQ/230-B2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHarman Kardon BDS 277BQ/230-B2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
