Harman KardonメーカーBDS 7773の使用説明書/サービス説明書
ページ先へ移動 of 37
Integrate d home theater sy stem BDS Owner’s Manual.
BDS 2 T able of Contents VERIFY LINE VOL T AGE BEFORE USING 3 UNP ACKING 3 INST ALLA TION LOCA TION 3 CLEANING 3 MOVING THE RECEIVER 3 INTRODUCTION 3 SYSTEM COMPONENTS 4 SUPPLIED ACCESSORIES 4 RECEIVE.
V erify Line V oltage Before Using, Unpacking, Installation Location, Cleaning, Moving the Receiver and Introduction 3 BDS Introduction Please register your product on our Web site at www .harmankardon.com. Note: Y ou’ll need the product’s serial number .
System Components and Supplied Accessories BDS 4 System Components Y our BDS system includes the following components: BDS 800 System 1 x BDS 5 5.1-channel Blu-ray Disc receiver 4 x SA T -TS60 sa tellite speakers 1 x SA T -TS60 center speaker 1 x HKTS200SUB powered subwoofer BDS 700 System 1 x BDS 5 5.
BDS 5 Receiver Front-Panel Controls Disc Slot: Insert a compatible disc into the slot. The BDS receiver’s disc player will accept 5-inch (12cm) and 3-inch (8cm) discs.
Receiver Rear -Panel Connections BDS 6 Receiver Rear -P anel Connections NOTE: See the Connections section, on page 14, for detailed information about making connections. AC Power Connector: After you have made and verified all other connections, plug the supplied AC power cord into this input and into an unswitched AC outlet.
7 Subwoofer Controls and Connections BDS Subwoofer Controls and Connections Phase Switch: This switch determines whether the subwoofer driver’s piston-like action moves in and out in phase with the satellite speakers.
Remote Control Functions BDS 8 Remote Control Functions DISC AUX iPOD RADI O SETTINGS DISPLA Y A - B R EPEA T 2 EJECT POWER TV 1 3 5 4 6 8 0 7 9 CLEA R HOME FIND OPTION S SURROUND OK TOP MENU PO P-UP .
Remote Control Functions 9 BDS Surround Button: Pressing this button cycles through all of the surround-sound modes that are available for the active program. Each press of the Surround button will change to the next mode in line. A pop-up display will appear, showing the modes as you cycle through them.
Placing the Speakers (BDS 800, BDS 700, BDS 400 and BDS 300 Systems) BDS 10 Placing the Speakers (BDS 800, BDS 700, BDS 400 and BDS 300 Systems) Placing the Front Left and Front Right Speakers Front Right Speaker Front Left Speaker Place the front speakers the same distance from each other as they are from the listening position.
11 BDS Placing the Speakers (BDS 600 System) Placing the Front Left and Front Right Speakers If your TV is placed on a table, you can place the soundbar on the table directly in front of the TV , centered with the TV screen. Attach the supplied rubber feet to the soundbar as shown in the illustration.
Mounting Options for Satellite and Center Speakers BDS 12 4. Attach the wall portion of the wall-mount bracket onto the wall using hardware that is appropriate for the wall’s construction and materials.
Mounting Options for Satellite and Center Speakers 13 BDS Wall-Mounting the BDS 800 Center Speaker 1. Decide on the location for the speaker (see Placing the Speakers (BDS 800, BDS 700, BDS 400 and BDS 300 Systems) , on page 10).
BDS 14 Wall-Mounting the BDS 700 Center Speaker 1. Determine the location for the speaker (see Placing the Speakers (BDS 800, BDS 700, BDS 400 and BDS 300 Systems) , on page 10, for more information). If possible, position the speaker so that one of the mounting screws (not included; use size #10) can be installed directly into a wall stud.
Connections 15 BDS Connecting the Satellite and Center Speakers (BDS 700 and BDS 300 systems) + – + – + – + – + – Surround Right* Front Right * Speakers included only in BDS 700 system Surro.
Connections BDS 16 Connecting the Subwoofer (all systems) Use the supplied mono RCA audio cable (purple connectors) to connect the subwoofer’ s Line-Level LFE In connector to the BDS receiver’ s Subwoofer output.
Connections 17 BDS Connecting Audio Sources TV T ape Deck -OR- T o Audio Output T o Play Output T o Coaxial Output T o Optical Output T o Optical Output Cable/Satellite T uner Digital Audio Source Ana.
Preparing the Remote Control BDS 18 Preparing the Remote Control Installing the Batteries Y our BDS system remote control uses three AAA batteries (supplied). Insert the batteries as shown in the illustration, making sure to observe the correct polarity .
19 BDS Programming Remote Control “Punch-Through” Commands After programming the remote to control an auxiliary (Aux) component, you can also program it so it will control the Aux component’ s channel up/down and transport functions (Play , Pause, etc.
Setting Up the Receiver BDS 20 Settings Menus Pressing the remote’ s Settings button displays the receiver’ s settings menus, which allow you to configure the receiver’ s various functions.
Setting Up the Receiver 21 BDS HDMI Deep Color: This option allows you to adjust the resolution of color output to your TV . If your TV accepts Deep Color , this option allows your TV to display an enhanced color palette. On: The BDS receiver outputs 36-bit Deep Color if your TV supports it.
Setting Up the Receiver and Using the Receiver BDS 22 Use the left and right arrow buttons to adjust the “L ” bar until it shows the distance 4. you measured to the front left speaker (the arrowheads indicate which speaker is being adjusted). Press the Exit button twice to return to the speaker setup screen (the front left and 5.
Using the Receiver and Using the Disc Player 23 BDS 6. Select the speaker you want to adjust, and use the left and right arrow buttons to adjust its volume.
Using the Disc Player BDS 24 Disc Cleaning Precautions Before playing, clean the disc with a cleaning c loth. Wipe the disc from the center out. s Do not use solvents such as benzine, thinner , commercially available cleaners or s anti-static spray intended for vinyl LPs.
Using the Disc Player and Listening to Y our iPod/iPhone 25 BDS Programmed Play: This option lets you create a programmed playlist for a disc. The program function works for CDs, DVDs and some Blu-ray Disc recordings (not all Blu-ray Disc recordings allow programmed play).
BDS 26 Using the Radio Press the Radio button on the remote control, or if the Home screen is displayed on the TV , highlight Radio and press the OK button.
Playing Files from USB Devices and CD Data Discs 27 BDS 1 / 3 Exit Option T ype:Folder USB .. Photo Music Video HOME OPTIONS The screen will then show the device’ s file structure. Selecting a folder will show all files of the selected type of media in the folder .
Playing Files from USB Devices and CD Data Discs, and Using Playlists BDS 28 Selecting a music file plays the file. If there are other music files in the folder that follow the selected file, the receiver will play them in the order they appear on the on-screen display .
T roubleshooting 29 BDS T roubleshooting If your BDS system isn’t performing the way you think it should, check to see if the problem is covered in this section before calling your dealer or contacting a harman kardon representative.
Aux Component Remote-Control Code List BDS 30 Aux Component Remote-Control Code List TV/DVR Manufacturer Code Numbers ADMIRAL 0192 0123 1088 1105 AIWA 1110 AKAI 1011 1020 1022 1042 1053 1056 1089 1093.
Aux Component Remote-Control Code List 31 BDS Manufacturer Code Numbers LG (GOLDSTAR) 0132 01 28 0 1 22 0 1 1 0 01 01 0002 0013 2004 LLOYTRON 0173 0172 LODGENET 0069 LXI 0148 0145 0077 MAGNAVOX 0148 0.
Aux Component Remote-Control Code List BDS 32 Manufacturer Code Numbers ABC 301 1 300 1 A L LE G RO 3111 A ME R IC A S T 3212 A RC H ER 3112 BE LC O R 3113 BT C A B L E 4007 CA BL E STA R 3113 3033 CA.
Aux Component Remote-Control Code List 33 BDS Manufacturer Code Numbers A I W A 6 0 4 1 A K AI 6033 A L BA 6001 6011 A MS T R AD 6032 A NK A RO 6021 A ST R O 6076 6077 6078 6079 6080 6081 6082 6083 BA.
Aux Component Remote-Control Code List BDS 34 Manufacturer Code Numbers P ANASONIC 5069 5066 5057 5053 6024 6031 P ANSA T 5020 PERSONAL CABLE 5018 PHILIPS 5075 6019 6021 6024 6032 6033 6053 P I C O 5 .
Specifications 35 BDS BDS 5 receiver (BDS 800, BDS 700, BDS 600 systems) BDS 2 receiver (BDS 400, BDS 300 systems) Audio Section Continuous average power , stereo mode (BDS 5, BDS 2): 65 watts per channel, 20Hz – 20kHz, @ <0.1% THD, both channels driven into 6 ohms Multichannel power (BDS 5 only): 65 watts per channel, 20Hz – 20kHz, @ <0.
Specifications BDS 36 SA T -TS60 Satellites (BDS 800 and BDS 400 systems) CEN-TS60 Center (BDS 800 system) Midrange transducer: T wo x 3" (75mm) flat-panel drivers, video-shielded T wo x 3".
HARMAN Consumer, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA 516.255.4545 (USA only) Made in P.R.C. © 2010 HARMAN International Industries, Incorporated.
デバイスHarman Kardon BDS 7773の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Harman Kardon BDS 7773をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHarman Kardon BDS 7773の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Harman Kardon BDS 7773の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Harman Kardon BDS 7773で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Harman Kardon BDS 7773を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHarman Kardon BDS 7773の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Harman Kardon BDS 7773に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHarman Kardon BDS 7773デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
