Healthriderメーカー831.297820 Sの使用説明書/サービス説明書
ページ先へ移動 of 19
¨ CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. 831.297820 Serial No. The serial number is found in the location shown below. Write the serial number in the space above for future reference.
2 T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 13. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See BEFORE YOU BEGIN on page 4 if the tread- mill is not working properly.
4 Congratulations for purchasing the HEALTHRIDER ¨ SOFTSTRIDER LX treadmill. The new SOFTSTRIDER LX combines advanced technology with innovative design to let you enjoy an excellent form of cardiovas- cular exercise in the convenience and privacy of your home.
5 1. With the help of a second person, carefully lay the treadmill on its right side as shown (refer to the drawing on page 4 to identify the right side). Insert the Extension Legs (88) into the treadmill. Make sure that the Extension Legs are turned so the Base Pads (70) are on the indicated side.
6 4. Remove the backing from the Wrench Clip (26). Press the Wrench Clip onto the base of the Uprights (84) in the indicated location. Press the Allen Wrench (29) into the Wrench Clip. 84 26 29 4 5. Make sure that all parts are tightened before you use the treadmill.
7 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
8 CONSOLE OPERA TION STEP BY STEP CONSOLE OPERATION If there is a thin sheet of clear plastic on the console, remove it. In addition, make sure that the power cord is properly plugged in (see HOW TO PLUG IN THE POWER CORD on page 7). Next, step onto the foot rails of the treadmill.
9 To stop the walking belt, press the start/pause button. The displays will pause and the time dis- play will begin to flash. To restart the walking belt, press the start/pause button again. Note: The walking belt can also be stopped by pulling the key out of the console.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left thumb, slide open the storage latch and hold it open. Pivot the treadmill until the frame is past the storage latch. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor.
c. Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in. PROBLEM: The power turns off during use SOLUTION: a.
13 PROBLEM: The walking belt is off-center when walked on SOLUTION: a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD . Using the allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each.
14 CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. RememberÑthese are general guidelines only. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
Training Zone Exercise After warming up, increase the intensity of your exer- cise until your heart rate is in your training zone for 20 to 60 minutes. Note: During the first few weeks of your exercise program, do not keep your heart rate in your training zone for longer than 20 minutes.
P ART LISTÑModel No. 831.297820 R0198A Key No. Qty. Description 1 2 Rear Roller Adjustment Bolt 2 5 Roller Adjustment Washer 3 1 Left Rear Endcap 4 1 Latch Decal 5 1 Frame 6 2 Roller Guard 7 1 Nut Ca.
12 53 4 61 24 24 14 20 19 16 15 13 22 8 8 8 25 21 2 9 10 26 29 33 32 37 5 2 1 31 30 29 14 24 39 34 36 81 35 6 6 10 11 7 35 24 36 24 28 23 27 9 14 38 61 98 2 1 3 41 40 43 42 19 97 18 17.
84 49 36 95* 94 93 92 91 90 65 67 66 71 70 81 82 61 61 61 73 61 61 61 62 52 63 54 82 81 96 55 71 79 79 71 79 87 51 50 50 50 61 61 61 50 50 54 56 58 57 75 59 60 80 80 61 61 61 2 71 70 2 19 85 86 19 86 85 61 88 88 61 76 44 77 44 45 44 44 64 74 68 71 70 47 48 48 47 46 71 46 61 69 61 83 83 89 89 72 50 97 EXPLODED DRA WINGÑModel No.
Part No. 143315 H00023-C R0198A Printed in USA © 1998 Sears, Roebuck and Co. The model number and serial number of your HEALTHRIDER ¨ SOFTSTRIDER LX treadmill are listed on a decal attached to the treadmill. See the front cover of this manual to find the location of the decal.
デバイスHealthrider 831.297820 Sの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Healthrider 831.297820 Sをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHealthrider 831.297820 Sの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Healthrider 831.297820 Sの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Healthrider 831.297820 Sで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Healthrider 831.297820 Sを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHealthrider 831.297820 Sの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Healthrider 831.297820 Sに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHealthrider 831.297820 Sデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
