HitachiメーカーP50XR01Eの使用説明書/サービス説明書
ページ先へ移動 of 123
USER'S MANUAL READ THE INSTRUCTIONS INSIDE CAREFULL Y . KEEP THIS USER'S MANUAL FOR FUTURE REFERENCE For future reference, record the serial number of your television. SERIAL NO. This serial number is located on the rear of the television. VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.
ENGLISH USER'S MANU AL Thank you for purchasing the Hitachi Plasma T elevision. Please read this user ’s manual carefully before operating this product. T o ensure proper operation, please read and follow ALL the instructions, especially the “IMPORT ANT SAFETY INSTRUCTIONS” and “SAFETY PRECAUTIONS”.
2 IMPORT ANT SAFETY INSTRUCTIONS ......... 3 INTRODUCTION ........................................... 3 About This Manual ................................................ 3 T rademark Credits ............................................... 3 About Software .
3 ENGLISH IMPORT ANT SAFETY INSTRUCTIONS Read this instruction thoroughly . Retain this instruction for future reference. Heed all warnings and cautions to prevent possible danger . Follow all instructions. Improper handling could cause personal injury and/or serious damage to the unit that may shorten its service time.
4 W ARNING: THIS EQUIPMENT MUST BE EARTHED IMPORT ANT The wires in the mains lead are coloured in accordance with the following code : Green and Y ellow = Earth, Blue = Neutral, Brown = Live.
5 ENGLISH The following are the symbols used in this manual and affi xed on the unit itself. Please fully understand the meanings of the symbols before reading the instructions in this section. W ARNING Never ignore the instruction. There are risks of serious injuries or possible death to the user .
6 W ARNING Ther e is a risk of fi re, electric shock, or serious injur y . ʄ Do not install the unit in an unsuitable place. It could cause a malfunction or in extreme cases danger of electric shock.
7 ENGLISH Supply connect the ground wire. SAFETY PRECA UTIONS (continued) CAUTION ʄ Do not co ver or bloc k any ventila tion holes on the product. The unit would overheat, and it could cause fi re or damage the product which may shorten its service life.
8 PRECAUTIONS ʄ Do not install areas w here it will be subjected to high temperatures. It could damage the cabinet or parts of the product. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
9 ENGLISH ABOUT B UIL T -IN HARD DISK DRIVE (HDD) Impor tant Notice of Built-in Har d Disk Drive (HDD) The built-in Hard Disk Drive (HDD) is a very delicate device. Please read carefully and follow the instructions below . Failure to do so could cause damages or malfunction.
10 ABOUT PLASMA DISPLA Y P ANEL Image Retention of Plasma Display Panel The plasma display panel has one of characteristics that can result in panel image retention depending on how the plasma display is used. The following are the common reasons for and ef fective preventive measures against the image retention.
11 ENGLISH O VERVIEW Large-screen and Full HD plasma panel (1920 X 1080). Improved Digital signal processor . High quality sound with deeper , richer and dynamic bass tones. V arious functions as Digital T errestrial T elevision (More TV channels, EPG, etc).
35" 7//&%2 12 COMPONENT NAMES Main Unit F r ont P anel 1 Cabinet 2 Panel 3 Remote Control Receiver 4 Recording/T imer Indicating Lamp 5 Power Indicating Lamp 6 Main Power Switch (On the botto.
13 ENGLISH Control Panel (inc luding front input) COMPONENT NAMES (continued) 1 Front Input 2 Stop/Play button 3 Rec (Recording) button 4 Menu/Return button 5 Input Select/OK button 6 V olume Down/ Ż.
14 t y u i R emote Contr ol COMPONENT NAMES (Continued) o p a s d t y u i o p a s d [fo r *** XR 01 E mod el] [ for *** XR01 U model].
15 ENGLISH NOTE • The functions indicated by [ ] are only for T eletext mode. Refer to 78 , 79 . • The functions with * are for operating built-in HDD. Refer to 55 ~ 69 . 1 Sub Power 29 2 Device Select (TV/DTT , DVD, SA T) 33 , 94 Press these buttons to select the device (TV/DTT , DVD, or SA T) to be controlled by this remote control.
16 PREP ARA TION This remote control operates on 2 “AA” batteries. 1. Open the batter y compar tment co ver Slide open the battery compartment cover on the backside in the direction of an arrow , and remove the cover .
17 ENGLISH Caution W hen Mo ving Main Unit Handgrips 50” model: Ɣ As this product is heavy , whenever it is moved, two people are required to transport it safely . Hold the unit by using the handgrips on the rear panel. 60” model: Ɣ As this product is heavy , whenever it is moved, four people are required to transport it safely .
18 PREP ARA TION (continued) Safety Precaution on Main Unit Installa tion R ead SAFETY PRECA UTIONS ( 4 to 8 ) carefull y besides this page. • The Desktop Stand has been used for the illustration in this manual. • When installing the unit of 60” model, use the Desktop stand (TS01G60KE) and optional Speaker System (SP01G60E).
19 ENGLISH Securing to a wall or pillar Using a commercially available cord, chain, and clamp, secure the set to a wall or pillar . (for 60” model) Securing to ceiling Using a commercially available cord, chain, and clamp, secure the set to a ceiling.
35" 7//&%2 1 35" 7//&%2 1 20 CONNECTION T er minal P ositions R ear 1 Power Cord Socket 2 Aerial Socket 3 AV 1 4 AV 2 5 AV 3 6 AV 4 7 Monitor Out 8 Service use only 9 Service use only 0 Power Swivel T erminal (See 91 ) * Not available for 60” model.
21 ENGLISH Connecting Procedur e This unit is ready for various kinds of connections. Make a connection in the following steps. Be sure to turn off the Main Power fi rst when connecting external equipments. 1. Connect Power Cord to the rear panel. 2.
22 CONNECTION (continued) Connecting Procedur e (continued) OUT IN [Example] VCR (Recording Device) IN OUT [Example] VCR Set-T op Box DVD player/recorder IN OUT [Example] VCR Set-T op Box DVD player/recorder 3.
23 ENGLISH AV 4 can be connected to the equipment with either Component or Composite output. When using as Composite, do not insert the jacks into P B or P R . If your external device has a Component terminal, COMPONENT connection is recommended for higher quality picture .
24 HDMI 2 and 3 terminal can be connected to the devices with HDMI output. If the external device has DVI output, this can be available with HDMI-DVI cable. In case of using the HDMI-DVI cable, connect to audio terminal besides HDMI input terminal. Refer to 26 about HDMI1 terminal on front.
25 ENGLISH PC terminal (D-sub 15 pin) is connected to PC, which allows Analogue RGB signal. Connect to also audio terminal on the rear besides PC (RGB) terminal. Sub Woofer terminal can bring the deep bass sound from the external speaker equipped with a built-in amplifi er .
26 CONNECTION (continued) Connecting Procedur e (continued) AV 5 can be connected to the equipment with S-video output and composite output. If your external device has S-video terminal, S-VIDEO connection is recommended for higher quality picture.
27 ENGLISH CONNECTION (continued) Connecting Procedur e (continued) Photo Input terminal can be connected to a digital still camera or USB card reader with USB cable. For details, refer to the Photo Input function shown on 86 ~ 90 . NOTE This photo input terminal does not support general USB devices such as USB memory .
28 Information How to secure the power cord and cables Step 1. Secure the power cord After connecting power cord to the rear panel, secure the power cord with the clamp. [Example : 50” model] Step 2. Secure all cables Secure all cables together with power cord by using large clamp.
29 ENGLISH BASIC OPERA TION P ower On/Off Now , turn On the main power to the unit. Make sure that the power cord is plugged into the wall socket. T o tur n On the power of the unit: 1. Press the Main Power switch on the unit. The Power Indicating Lamp will illuminate in Red (Standby mode).
30 BASIC OPERA TION (continued) Easy Setup When you turn ON the TV for the fi rst time, your TV automatically leads to the settings of “ Language ,” “ T arget ,” and “ Country (TV and DTT).” (Also, refer to the attached Quick Guide.) The integrated DVB-T tuner will only receive MPEG2 compressed signals.
31 ENGLISH Channel Up/Down button BASIC OPERA TION (continued) Channel Selections There are 4 ways to select the channels: stepping through the channel, selecting by number , selecting from the on-screen channel list, and using the Electronic Programme Guide (EPG).
32 BASIC OPERA TION (continued) V olume Up/Down 1. T o increase the sound volume, press button on the remote control, or V olume Up button on the control panel. The V olume Indicator value on the screen will shift right. 2. T o decrease the sound volume, press button on the remote control or V olume Down button on the control panel.
33 ENGLISH BASIC OPERA TION (continued) Input Switching to DTT/TV/A V1~5/HDMI1~3/RGB There are several ways to change the input mode as mentioned below . Please select your preferred way . z Y ou can select DTT and TV mode directly . Press button on the remote control.
34 English Spanish 30 min. 01h 59m 17 : 45 ABTV 12 10 30 min. 01h 59m 17 : 45 ABTV 1 30 min. 01h 59m 17 : 45 AV1 Component AV VIDEO Channel number DTT TV Audio language *1 Subtitle language (DVB) *1 C.
35 ENGLISH MENU OPERA TION Ho w to use On-Scr een Display (OSD) system With the On-Screen Display system, you can access the various kinds of the features and functions in this product. There are two setting menus of Main Menu and Function Menu. As usage, press MENU button to show Main Menu or FUNCTION button to show Function Menu.
36 MAIN MENU OPERA TION Initial Setup Menu This menu allows you to access various kinds of initial settings. The menu items indicated by * can be automatically stored. Selected Items Setup hint Colour System* System1 Do not change the original setting.
37 ENGLISH MAIN MENU OPERA TION (continued) Initial Setup Menu (continued) Selected Items Setup hint RGB Input V ertical Filter* Off Reduce the fl ickers on the screen when set to [On]. On Frequency Mode PC Select [Movie] when you see the moving image on PC.
38 MAIN MENU OPERA TION (continued) Channel Manager Menu (TV mode) With this menu, you can check channel list and access various kinds of features relating to TV channel settings.
39 ENGLISH MAIN MENU OPERA TION (continued) Channel Manager Menu (DTT mode) With this menu, you can check channel list and access various kinds of features relating to DTT channel settings.
40 MAIN MENU OPERA TION (continued) Confi guration Menu This menu provides various ways to protect your panel, reduce power consumption, and set up utilizing the useful functions, such as DVB subtitle setting. The menu items indicated by * can be automatically stored.
41 ENGLISH Selected Items Setup hint Luminance Manager Off This helps to reduce the risk of the image retention such as station logo by lowering the brightness of 4 corners. On Panel Mode 1 This function switches the driving method of the PDP panel at 50Hz input signal.
42 MAIN MENU OPERA TION (continued) Picture Menu (TV/A V mode) In this menu, you can make specifi c adjustments for the picture based on your preference. By pressing ź button at the bottom of each menu page, the next Picture menu page will appear on the screen.
43 ENGLISH MAIN MENU OPERA TION (continued) Picture Menu (TV/A V mode) (continued) Selected Items Setup hint Contrast Mode* Dynamic It allows you to choose from 2 modes. Dynamic: Sharpen the gradation to improve the contrast feeling. Normal: Reproduce as faithful gradation as possible.
44 MAIN MENU OPERA TION (continued) Picture Menu (TV/A V mode) (continued) Selected Items Setup hint MPEG NR* Off This is a noise reduction system for MPEG picture signal. (ex. against mosquito noise and block noise.) Low High Reset Each item on this menu screen can be restored to the original factory settings by pressing OK button.
45 ENGLISH MAIN MENU OPERA TION (continued) Picture Menu (RGB mode) In this menu, you can make specifi c adjustments for the RGB picture based on your preference. By pressing ź button at the bottom of each menu page, the next Picture menu page will appear on the screen.
46 MAIN MENU OPERA TION (continued) Picture Menu (Photo mode) In this menu, you can make specifi c adjustments for the picture of photo mode based on your preference. By pressing ź button at the bottom of each menu page, the next Picture menu page will appear on the screen.
47 ENGLISH MAIN MENU OPERA TION (continued) Picture Menu (Photo mode) (continued) Selected Items Setup hint L TI* Off Adjusts the sharpness of the picture signals. Low Middle High CTI* Off Adjusts the sharpness of the colour signals. Low Middle High Black Enhancement* Off Adjusts the black level compensation.
48 MAIN MENU OPERA TION (continued) Audio Menu With this menu, you adjust and customize the audio condition as you like. Y ou can move on to the next menu screen by pressing ź button at the bottom. The menu items indicated by * can be automatically stored.
49 ENGLISH MAIN MENU OPERA TION (continued) Audio Menu (continued) Selected Items Setup hint Headphone V olume* 0 ~ 60 It allows you to adjust the volume of the headphone. Headphone Select* TV+H.Phone Y ou can hear the sound from both speakers and headphone.
50 FUNCTION MENU OPERA TION Basic Mode This can access to various kinds of useful features, such as EPG and timers. If you press FUNCTION button on remote control at normal mode, the following menu appears. Selected Items Setup hint Favourite This gives access to Favourites page which allows you to set a channel as Favourite.
51 ENGLISH FUNCTION MENU OPERA TION (continued) Basic Mode (continued) Selected Items Setup hint Lock & Rating Channel Lock Off If set On, the selected channels can be locked so that it cannot be selected without 4 digit codes. T o select the channel to lock, go to “Channel Manager” from main menu.
52 FUNCTION MENU OPERA TION (continued) Guide Mode [DTT mode only] If you press FUNCTION button on the remote control during EPG mode, the following menu appears. See 73 for the details about EPG. Selected Items Setup hint Matrix View/Channel V iew Matrix View Select a type of the EPG display .
53 ENGLISH FUNCTION MENU OPERA TION (continued) Prog r amme Search Mode [DTT mode only] If you press FUNCTION button on the remote control during programme search, the following menu appears. Selected Items Setup hint Programme Search Channel Category Y ou can search for programmes.
54 FUNCTION MENU OPERA TION (continued) Photo Input Mode If you press FUNCTION button on the remote control whilst using Photo Input function, the following menu appears. See 87 , 88 for the details. Selected Items Setup hint Rotate The selected picture is rotated in the sequence of the following.
55 ENGLISH HDD FUNCTIONS R ecor ding Y ou can record onto the HDD and enjoy watching programmes at a time more suitable for you. Recording the Programme Before recording: Make sure to set the current time and date in advance. (See T imers in 50 ) 1. Select the channel you want to record.
56 10 120min TS 01:15:30 HDD HDD FUNCTIONS (continued) R ecor ding (continued) Recording Mode and Recording T ime There are 5 recording mode. The quality of the recorded picture varies depending on Recording Mode.
57 ENGLISH HDD FUNCTIONS (continued) R ecor ding (continued) Copyright Protection The programmes and picture software that are protected by Copyright cannot be recorded. Recording Another Broadcast Whilst watching a programme, you can record another broadcast programme simultaneously .
58 HDD FUNCTIONS (continued) R ecor ding (continued) Quick T imer Recording Y ou can select length of recording time. Start recording using the procedure on page 55 ~ 56 .
59 ENGLISH HDD FUNCTIONS (continued) R ecor ding Timer Before operating Recording Timer: Make sure to set the current time and date. See T imers in 50 . Recording T imer with Electronic Programme Guide (EPG) *This function is available only in DTT mode.
60 VIDEO Plus+ ® System (for *** XR01U model) S HOW V IEW ® System (for *** XR01E model) *This function is available only in TV mode. Before Setting Recording Timer: Make sure that the remaining space of HDD is enough, otherwise recording stops or cannot succeed.
61 ENGLISH Manual Recording T imer Y ou can set Recording T imer manually . 1. Press FUNCTION button. 2. Select “T imers” by using button, and press OK button. 3. Select “Programme T imers” by using button, and press OK button. T imer List appears.
62 Operating Recording Timer • Notifi cation appears 20 seconds before recording starts. • If Recording T imer is operated in standby mode, the TV starts up 1 minute before recording starts. The TV returns to standby mode after the programme ends.
63 ENGLISH HDD FUNCTIONS (continued) Playing the Recorded Programme by Selecting from Thumbnail-Size List Y ou can select the recorded programme you want to play from Thumbnail-Size List. 1. Press button, and the list of recorded programmes is displayed.
64 T ime Navigation Select the picture you want to watch whilst enjoying the programme, and it jumps to the picture to play . 1. Press FUNCTION button whilst a programme is being played. Function Menu Time Navigation Zoom 2. Select T ime Navigation using button, and press OK button.
65 ENGLISH c. Fast forward play Press during playback. Each time pressing the button, you can change the speed as follows; x1.5 x2 x10 x30 x60 d. W atching in slow playback Press button during pause. Each time pressing the button, you can change the speed as follows; 1/16 1/8 1/2 e.
66 Dividing the Recorded Programme into T wo Y ou can divide the programme from the scene you prefer . 1. Press button, and the list of recorded programmes is displayed. 2. Select the programme by button, and press FUNCTION button. 3. Select “Divide” by button, and press OK button.
67 ENGLISH Copying the Recorded Programme onto other Folders All the recorded programmes are saved in “All” folder . Y ou can select the programme in “All” folder , and copy onto the other folders. 1. Press button, and the list of recorded programmes are displayed.
68 Setting Favourite Scenes as Thumbnail Y ou can select your favourite scene among recorded programmes to set as the thumbnail. 1. Press button, and the list of recorded programmes is displayed. 2. Select the programme by button, and press FUNCTION button.
69 ENGLISH Editing the T itle of Recorded Programme Y ou can edit the title of recorded programmes. 1. Press button, and the list of recorded programmes is displayed. 2. Select the programme by button, and press FUNCTION button. 3. Select “Rename” by button, and press OK button.
70 FEA TURES Channel List (TV mode) Y ou can adjust channel setting on channel list from Channel Manager menu. 1. Press MENU button on the remote control in TV mode. 2. Select “ Channel Manager ” from Main Menu. 3. Channel list shows up with those status marks.
71 ENGLISH Channel Manager Fri 30 Nov 2007 Return Select Enter Hide Fine Tuning Single Scan Full Scan Scan Setting DTT: All Service United Kingdom Continental Digital-cast CN Name Status 2 BG0100101 3 ATV-Ch03 10 Channel-1 20 Super20 40 News360 50 Sports-5 60 BTTT-Ch06 81 TVV-Ch03 300 Trains30 811 News25 Signal Quality:72 0 100 Del.
72 FEA TURES (continued) Channel List (DTT mode) (continued) 5. Y ou can use the detailed setting by using setting section shown on the lower right. Hide Off Y ou can hide/show the channel which sets as “Skip On” by pressing OK button whilst selecting “ Hide ”.
73 ENGLISH EPG screen displays a list of the stored channels along with information on what programmes are being broadcast, if the service is available. Setting Recording T imer with EPG is available. See 59 for details. 1. Press button to display EPG screen.
74 6. Select View Timer by using ◄► button, and press OK button. 7. Input the following information. T itle 1. Use ◄► button to change the position to input. 2. Input the title by using and numeric button on the remote control. 3. Press OK button to set up the title.
75 ENGLISH z Check the status of the selected channel/programme: Check the following marks on the T imer List, which might refl ect on your setting. ON The selected channel has Channel Lock. See 51 for the details. ON The selected channel has Rating Lock.
76 Y ou can register your favourite list of channels. 1. Select “ Favourite ” in Function Menu. Refer to 50 . 2. Change pages using ◄► button and select channels using button. And then select the following buttons. Red (Del.) Deletes a registered channel.
77 ENGLISH Y ou can set DVB Subtitle On here, and the available DVB Subtitle Language provided in the current programme can be selected. 1. Press button on the remote control during DTT mode. 2. Y ou can select one of the languages by using ◄► button.
78 FEA TURES (continued) Analogue/Digital T elete xt This teletext supports the following. • TV mode: All models • DTT mode: *** XR01E How to operate the T eletext The T eletext can be simply displayed by pressing the remote control buttons. NOTE Select T eletext language from Confi guration menu shown on 41 .
79 ENGLISH This teletext is for *** XR01U model in DTT mode. MHEG Digital T eletext can provide various information with text on the screen. • T o access/exit from T eletext screen, press button or Colour button depending on the programme being broadcast.
80 FEA TURES (continued) Size Switc hing DTT/TV/A V/playback signal input Select “Zoom” from Function Menu, and the screen display size is switched in sequence, and the status will be displayed at the bottom of the screen.
81 ENGLISH FEA TURES (continued) Size Switc hing (continued) DTT/TV/A V/playback signal input (continued) Input Signal Display Screen Display Size T o display suitable scr een as follo ws. W hen Wa tching High Defi nition Pictur es: (16:9 Signal) Full/Full 1 Play a 16:9 image faithfully showing 95% of the size.
82 FEA TURES (continued) Size Switc hing (continued) RGB signal input Y ou can select suitable size depending on the resolution. Normal Full Real Display Area Selection Diagram Resolution Input signal.
83 ENGLISH Activate in DTT/TV/A V1~5/HDMI1~3 mode With this feature, you can watch different channels simultaneously on one screen. AV 1 5 AB TV AV [Split] FEA TURES (continued) Multi Picture Mode [PinP] There are two modes (Split and PinP) in Multi-Picture mode.
84 Activate in R GB mode When you activate the Multi Picture mode in RGB Input, the large screen (Main- screen) is RGB Input. The picture is displayed in PinP mode where the sub- screen is displayed inside of the large screen (Main-screen). 1. T o activate Multi Picture mode, press button on the remote control.
85 ENGLISH FEA TURES (continued) Picture F r eezing By pressing button, you can change to freeze mode easily anytime you like. Press it again to return to normal picture. It displays 2 pictures from the same source. One is active (left), whilst the other is still picture (right).
86 FEA TURES (continued) Photo Input Function With this Photo Input function, you can enjoy watching Photos from such devices as Digital Still Camera and SD card along with useful features such as Slide Show . Operating the Photo Input 1. Before operating this function, make sure to turn the power OFF /Standby .
87 ENGLISH FEA TURES (continued) Photo Input Function (continued) T humbnail-Size Image (Inde x) to Full-Size Image 4 8 12 16 3 7 11 15 2 6 10 14 1 5 9 13 20 24 28 32 19 23 27 31 18 22 26 30 17 21 25 29 20 24 28 32 19 23 27 31 18 22 26 30 17 21 25 29 OK OK 4 8 12 16 3 7 11 15 2 6 10 14 1 5 9 13 Prev.
88 FEA TURES (continued) Photo Input Function (continued) Slide Show Function 20 24 28 32 19 23 27 31 18 22 26 30 17 21 25 29 20 24 28 32 19 23 27 31 18 22 26 30 17 21 25 29 Prev./Next Thumbnail Jump 0-9 23/60 30 Nov 2007 1600 x 1200 ABCDEF Function Menu Rotate Slideshow Select Device OK OK OK Select Adjust Cancel Slideshow Interval 10 Sec.
89 ENGLISH FEA TURES (continued) Photo Input Function (continued) Other • Y ou can access to Picture menu directly by pressing MENU button during Photo Input mode. Y ou can set up the picture setting only for Photo Input images. Please note that some of the picture menu are not available for Photo Input mode.
90 FEA TURES (continued) Photo Input Function (continued) CAUTION In case of copying, viewing or editing a picture by computer , etc., it may not be displayed in this function. Do not connect any apparatus other than DSC, USB card reader , and SD card/MMC to the Photo Input connector .
91 ENGLISH FEA TURES (continued) P ower Swiv el With the Desktop stand, you can adjust the angle of the panel side to side by pressing button on the remote control. Power Swivel is not available for 60” model. Swivel CAUTION • Do not push the panel with your hands whilst operating the Swivel.
92 FEA TURES (continued) Audio Switc hing NICAM / Sound Multiple x (inc luding A2) (TV mode) Y ou can make optimum use of available audio by pressing I / II button of remote control.
93 ENGLISH FEA TURES (continued) P ower Sa ve Mode W hen A V/RGB input is selected • Y ou are provided with the function to save power consumption when no signal is detected in A V/RGB input.
94 FEA TURES (continued) D VD Player / STB Selection Y ou can use this remote control to operate DVD Player and Set T op Box of Hitachi or other manufacturers as well as this set. Set Up Example: Hitachi DVD 1. Set up the manufacturer . Hold down button and press button.
95 ENGLISH TROUBLESHOO TING Before calling service technician, check the following tables fi rst. If the problem is not be solved with the suggested procedures, contact your local dealer . For your safety , NEVER try to repair the product by yourself.
96 TROUBLESHOO TING Symptom and Check List Symptoms Check list Page No picture - no sound • Check the Indicating lamp status. • Check the connection of the Power Cord and/or other cables. • Check if the Main Power of the unit or external equipments is ON.
97 ENGLISH TROUBLESHOO TING (continued) Symptom and Check List (continued) Symptoms Check list Page • Cannot display the image from “Photo Input function”. • Check the connecting equipments and image format. (Please refer to “Photo Input function”.
98 TROUBLESHOO TING (continued) Symptom and Check List f or HDD functions Symptoms Check list P age Cannot record • The remaining space of HDD is not enough. • Another broadcast is being recorded. • 999 programmes (maximum number) are already recorded.
99 ENGLISH Symptoms Check list P age Cannot delete all the programmes Some programmes may be protected by Delete Lock. 66 The recorded programme disappears or nothing is recorded • Whilst Recording T imer is in operation, reception conditions deteriorated, or broadcast suspended.
100 PRODUCT SPECIFICA TIONS SPECIFICA TION Panel Display dimensions Approx. 50 inches (1 106 (H) x 626 (V) mm, diagonal 1270 mm) Approx. 60 inches (1336 (H) x 752 (V) mm, diagonal 1530 mm) Resolution .
101 ENGLISH PRODUCT SPECIFICA TIONS (continued) Signal Input RGB ter minal (D-sub 15-pin connector) Pin Input signal 1R 2G 3B 4 No connection 5 No connection 6 R.GND 7 G.GND 8 B.GND 9 No connection 10 GND 1 1 No connection 12 [SDA] 13 H. sync 14 V .sync.
102 PRODUCT SPECIFICA TIONS (continued) R ecommended Signal List W ith HDMI input No. Signal mode Horizontal frequency (kHz) Dot cloc k frequency (MHz) Remarks Signal Name Resolution V er tical frequency (Hz) 1 576i 720(1440) X 576 50.00 15.63 27.00 EIA/CEA-861B 2 480i 720(1440) X 480 59.
103 ENGLISH LICENSE A GREEMENTS End User License Ag reements for Operating System Softw are OPERA TING SY STEM LICENSE INFORMA TION This HIT ACHI TV incorporates certain open source operating system software distributed under the GNU GENERAL PUBLIC LICENSE V ersion 2 and GNU LESSER GENERAL PUBLIC LICENSE V ersion 2.
104 LICENSE A GREEMENTS (continued) End User License Ag reements for Operating System Softw are (continued) GNU GENERAL PUBLIC LICENSE V ersion 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc.
105 ENGLISH LICENSE A GREEMENTS (continued) End User License Ag reements for Operating System Softw ar e (continued) 1. Y ou may copy and distribute verbatim copies of the Program’s source code as y.
106 LICENSE A GREEMENTS (continued) End User License Ag reements for Operating System Softw are (continued) The source code for a work means the preferred form of the work for making modifi cations to it.
107 ENGLISH LICENSE A GREEMENTS (continued) End User License Ag reements for Operating System Softw ar e (continued) Each version is given a distinguishing version number .
108 LICENSE A GREEMENTS (continued) End User License Ag reements for Operating System Softw are (continued) If the program is interactive, make it output a short notice like this when it starts in an .
109 ENGLISH LICENSE A GREEMENTS (continued) End User License Ag reements for Operating System Softw ar e (continued) GNU LESSER GENERAL PUBLIC LICENSE V ersion 2.
11 0 LICENSE A GREEMENTS (continued) End User License Ag reements for Operating System Softw are (continued) We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public License.
111 ENGLISH LICENSE A GREEMENTS (continued) End User License Ag reements for Operating System Softw ar e (continued) b) Y ou must cause the fi les modifi ed to carry prominent notices stating that you changed the fi les and the date of any change.
11 2 LICENSE A GREEMENTS (continued) End User License Ag reements for Operating System Softw are (continued) When a “work that uses the Library” uses material from a header fi le that is part of the Library , the object code for the work may be a derivative work of the Library even though the source code is not.
11 3 ENGLISH LICENSE A GREEMENTS (continued) End User License Ag reements for Operating System Softw ar e (continued) a) Accompany the combined library with a copy of the same work based on the Library , uncombined with any other library facilities. This must be distributed under the terms of the Sections above.
11 4 LICENSE A GREEMENTS (continued) End User License Ag reements for Operating System Softw are (continued) NO W ARRANTY 15. BECAUSE THE LIBRAR Y IS LICENSED FREE OF CHARGE, THERE IS NO W ARRANTY FOR THE LIBRARY , T O THE EXTENT PERMITTED BY APPLICABLE LAW .
11 5 ENGLISH Thank you for purchasing this Hitachi T elevision. In the unlikely event that this product should develop a fault, we undertake to repair or replace any part of the product which fails due to a manufacturing defect within 12 months of the date of purchase provided that .
UK F QUICK GUIDE / MODE D’EMPLOI ABRÉGÉ / HURTIGGUIDE QUICK GUIDE / MODE D QUICK GUIDE / MODE D ’ EMPLOI ABRÉGÉ / EMPLOI ABRÉGÉ / HURTIGGU HURTIGGU IDE IDE UK F NO NO Insert the batteries into your handset Switch your TV on, ready to start autotune procedure.
UK / F / NO UK 5 NO 5 F QR72571 5 TV DTT TV&DTT Handset Controls used for Television Autotune Commandes de la télécommande utilisées pour le réglage automatique du téléviseur Knapper som bru.
ENGLISH 1 Hitachi Plasma T elevision Stand Model TS01G60KE USER MANUAL Thank you for purchasing Hitachi plasma television. Ɣ This television stand is used for the following television models : P60XR01U, P60XR01E Getting Started Ɣ Precise work is required to attach this television stand.
2 Please follow these instructions Ŷ Make sure to perform the installation procedure with at least two people. Failure to do so could cause the heavy television to fall down and cause injury . Ŷ Tighten bolts and screws securely in their specified locations.
ENGLISH 3 Attaching to the main unit Preparation 1. Attach the braces to the stand unit (back) stand unit 2 braces Attach the both braces to stand unit as shown bellow picture. Please ensure that holes for attaching the stand can be seen form the stand unit.
4 Ŷ Procedure for attaching to the television 1. Attach the stand to the television 3. Check again to ensure that the installation screws are tightened firmly 2.
Hitachi Ltd. Consumer Business Group Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, T okyo 100-0004 Japan HIT ACHI EUROPE L TD. Consumer Affairs Department PO Box 3007 Maidenhead Berkshire SL6 8ZE UNITED KINGDOM T e l : 0870 405 4405 Email: consumer .
デバイスHitachi P50XR01Eの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Hitachi P50XR01Eをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHitachi P50XR01Eの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hitachi P50XR01Eの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hitachi P50XR01Eで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hitachi P50XR01Eを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHitachi P50XR01Eの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hitachi P50XR01Eに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHitachi P50XR01Eデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。