HomeliteメーカーUT70127Aの使用説明書/サービス説明書
ページ先へ移動 of 24
OPERA T OR’S MANU AL T rimmer / Brushcutter F3045 UT70127A SAVE THIS MANUAL FOR FUTURE REFERENCE Y our new trimmer has been engineered and manufactured to Homelite’ s high standard for dependability , ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
2 ■ ■ ■ ■ ■ Safety ......................................................................................................................... ............................................ 2 - 3 ■ ■ ■ ■ ■ Symbols .....................
3 ■ ■ ■ ■ ■ Inspect the unit before each use for loose fasteners, fuel leaks etc. Replace any damaged parts before use. ■ ■ ■ ■ ■ The string head or blade will rotate during carburettor adjustments.
4 SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. SYMBOL NAME EXPLANATION Safety Alert Symbol Indicates danger, warning or caution.
5 SAVE THESE INSTRUCTIONS Weight W ithout fuel, cutting a ttachment ................................................................................................ .......... 5.58 Kg With blade ........................................................
6 UNP A CKING INSTRUCTIONS ■ ■ ■ ■ ■ Carefully remove the product from the carton. ■ ■ ■ ■ ■ Inspect the product to make sure no breakage or damage occurred during carriage. ■ ■ ■ ■ ■ Do not discard the packing material until you have inspected and operated the product.
7 ATTACHING THE POWER HEAD TO THE TRIMMER ATTACHMENT See Figure 2. REMOVING THE ATTACHMENT FROM THE POWER HEAD For removing or changing the attachment: 1 . Loosen the knob. 2. Push in the button and twist the shafts to remove and separate ends. ATTACHING THE STORAGE HANGER See Figure 3.
8 ASSEMBL Y FRONT HANDLE See Figure 4. A barrier handle should be used for ensuring the best control and maximising operator safety. 1 . Hold the top and bottom clamp snugly in position on the shaft housing so that handle will be located to the operator’s left.
9 ASSEMBL Y GRASS DEFLECTOR FOR TRIMMER USE BLADE GUARD FOR BRUSHCUTTER USE Fig. 7 Fig. 6 BENT END OF SILENCER GUARD OPENING IN REAR HOUSING SCREWS SILENCER GUARD REAR HOUSING TORQUE WRENCH SILENCER GUARD ASSEMBLY See Figure 6. 1 . Remove silencer guard and two screws from the owner’s kit.
10 ASSEMBL Y BLADE GUARD See Figure 8. 1 . Attach the blade guard to the mounting bracket; install the four screws (10-24 x 3/4 in) from the top of the mount- ing bracket through the blade guard and into the threaded mounting plates. 2 . Using the torque wrench supplied, tighten all four screws securely.
11 ASSEMBL Y BLADE GUARD BLADE CUPPED WASHER BLADE NUT HOLDING PIN Fig. 10 SPANNER (13 mm) UPPER FLANGE WASHER INSTALLING THE BLADE See Figure 10. 1 . Place the upper flange washer over the gear shaft with the hollow side towards the blade guard. 2 . Centre the blade on the upper flange, making sure the blade sits flat.
12 FUEL AND REFUELLING HANDLING THE FUEL SAFELY ■ ■ ■ ■ ■ Always handle fuel with care. It is highly flammable. ■ ■ ■ ■ ■ Always refuel outdoors where there are no sparks and flames. Do not inhale fuel vapour. ■ ■ ■ ■ ■ Do not let petrol or oil come in contact with your skin.
13 ADVANCING THE STRING ADVANCING STRING USING THE EZ LINE™ TAP ADVANCE SYSTEM String advance is controlled by tapping string head on grass while running engine at full throttle. 1 . Run engine at full throttle. 2 . Tap string head on ground to advance string.
14 W ARNING: Extreme care must be taken when using blades to ensure safe operation. Read the safety information for safe operation using the blade, refer to “Specific Safety Rules for Brushcutter and Blade Use” earlier in this manual. ■ Always hold brushcutter with both hands when operating.
15 W ARNING: Never start or run the engine inside a closed or poorly ventilated area; breathing exhaust fumes can kill. STARTING AND STOPPING See Figures 16 and 17. NOTE: The unit is equipped with an automatic choke feature. The starting instructions for this feature are different from units with a manual choke.
16 ■ You may make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorised service dealer. ■ Consequences of improper maintenance may include excess carbon deposits resulting in loss of performance and discharge of black oily residue dripping from the silencer.
17 STRING REPLACEMENT See Figures 20, 21, 22 and 23. 1 . Stop the engine and disconnect the sparking plug wire. Hold the string head and unscrew the spool retainer. Turn clockwise. 2 . Remove the spool from the string head. NOTE: Keep the spring attached to the spool.
18 2 1 3 S T O P S T S T OP 1 2 3 MAINTENANCE Fig. 26 AIR FILTER COVER FILTER Fig. 25 LATCH PULL COVER TO OPEN CLEANING THE EXHAUST PORT AND SILENCER Depending on the type of fuel used, the type and amount of oil used, and/or your operating conditions, the exhaust port and silencer may become blocked with carbon deposits.
19 MAINTENANCE The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loosened, the check valve may be faulty or the filter clogged. Replace fuel cap if required.
20 TR OUBLESHOO TING PROBLEM POSSIBLE CAUSE SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM, CONT A CT Y OUR A UTHORISED SER VICE DEALER. 1. Check spark. Remove sparking plug. Reattach the sparking plug cap and lay sparking plug on metal cylinder .
21 TR OUBLESHOO TING 1. Lubricate with silicone spray. 2 . Install more string. Refer to “String Replacement” earlier in this manual. 3 . Pull strings while alternately pressing down on and releasing spool retainer. 4 . Remove string from spool and rewind.
22 GUARANTEE – STATEMENT (RTSA / RTUK / RTG) All Homelite products are guaranteed from defects in material and workmanship for a period of twenty-four (24) months, effective and evidenced from date of original invoice or delivery note.
23 NO TES.
983000-326 5-03 OPERA T OR’S MANU AL T rimmer / Brushcutter F3045 UT70127A Ryobi T echnologies GmbH Itterpark 7 D-40724 Hilden Germany Tel.: +49 (0)2103 / 29 58 0 Fax : +49 (0)2103 / 29 58 29 info@ryobi-rtg.de Ry obi T echnologies Customer Services Anvil House T uns Lane Henley-on-Thames RG9 1SA UK Homelite / R.
デバイスHomelite UT70127Aの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Homelite UT70127Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHomelite UT70127Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Homelite UT70127Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Homelite UT70127Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Homelite UT70127Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHomelite UT70127Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Homelite UT70127Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHomelite UT70127Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
