HoneywellメーカーHMLCD19e2の使用説明書/サービス説明書
ページ先へ移動 of 26
Document 800-00718 – Rev A – 07/07 User Manual HMLCD17e2, HMLCD19e2 e-Series LCD Monitor.
Revisions Issue Date Revisions A July 2007 Initial Release.
Document 800-00718 Rev A 3 07/07 FCC COMPLIANCE STATEMENT Information to the User: This equipment ha s been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
4 6. Never insert anything metallic into the monitor openi ngs . Doing so may create the da nger of electric shock. 7. To avoid electric shock, never touch the inside of th e monitor. Only a qualified technician sh ould open the monitor case. 8. Never use your monitor if the power cable has been damaged.
e-Series LCD M onitor User Manual Document 800-00718 Rev A 5 07/07 Contents Connecti ng the Mo nitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Mounting the Monito r . . . . . . . . . . . . . . . . . . . . .
6 Contents.
e-Series LCD M onitor User Manual Document 800-00718 Rev A 7 07/07 Figures Figure 1 Connecting to external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Figure 2 Bottom panel controls . . . . . . . . . . . . . . . . . . . .
8 Figures.
e-Series LCD M onitor User Manual Document 800-00718 Rev A 9 07/07 Tables Table 1 D-SUB Pin Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Table 2 Power Consumption . . . . . . . . . . . . . . . . . . . . . .
10 Tables.
e-Series LC D Monitor Use r Manual Document 800-00718 Rev A 11 07/07 Connecting the Monitor The e-Series LCD monitor can be used with your video surveillance system and connects to a number of external devices, such as a DVR, VCR or camera . Figure 1 Connecting to exte rnal devices Bottom Panel Controls Figure 2 Bottom panel co ntrols 1.
12 Connecting the Monitor 6. VIDEO 2(AV2) OU T Composite signal Output for AV2 7. VIDEO 2(AV2) IN Composite signal Input for AV2 8. VIDEO 1(AV1) OU T Video looping Output for AV1 9. VIDEO 1(AV1) IN Composite signal Input for AV1 10. D-SUB IN PC Signal Input 11.
e-Series LCD M onitor User Manual Document 800-00718 Rev A 13 07/07 Remote Controller Figure 4 Remote Control 1 2 3 6 4 6 78 5 5 1. POWER Turns the power ON or OFF. There may be a few seconds delay before the display appears. 2. SOURCE Select PC or Video (PC/AV1/AV2/S-Video) 3.
14 Mounting the Monitor Mounting the Monitor Figure 5 Ba ck of the LCD monitor and mount ing.
e-Series LCD M onitor User Manual Document 800-00718 Rev A 15 07/07 Controls and Functions Front Panel Controls The options available on the front of the LCD mon itor mirror those of the remote control. Figure 6 Front controls 1. SOURCE Selects th e input s ource an d m oves from the previous menu.
16 Controls and Functions OSD Menu Input Source: Select PC, AV1, AV2 or SVIDEO Figure 7 Input Source Screen: Figure 8 Scree n setti ngs Brightness Increase or decrease the intensity of the image. Contrast Increase or decrease the intensity (lightness or di mness) of the image.
e-Series LCD M onitor User Manual Document 800-00718 Rev A 17 07/07 Phase (PC Mode Only) Adjust the number of horizontal picture elements. Audio: Figure 9 Audio setting s Volume Adjust audio volume. OSD: Figure 10 OSD (On Scre en Display) settings H. Position Move the OSD position to right(' X ') or left(' W ').
18 Controls and Functions Color (PC Mode): Figure 11 Colo r settings Color Temp Adjust color temperature to 9300, 6500, user. (not e : 9300 is factory default) Red Adjust red color for user. Green Adjust green color for user. Blue Adjust blue color for user.
e-Series LCD M onitor User Manual Document 800-00718 Rev A 19 07/07 TV Utility: Figure 13 TV Utility settings Exit Turn off OSD menu..
20 D-Sub Connector Pin Assignments D-Sub Connector Pin Assignments Figure 14 D-Sub connector pins Table 1 D-SUB Pin Settings Pin Description 1 Red Video 2 Green Video 3B l u e V i d e o 4 Ground 5 Gro.
e-Series LCD M onitor User Manual Document 800-00718 Rev A 21 07/07 Power Management This LCD monitor features a power management system to power down upon receipt of a VESA DPMS (Display Power Management Si gnaling) from a VESA DPMS video card.
22 Specifications and Parts Specifications and Parts Table 4 Specifications list Parameter Description LCD Type Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm): 0.
e-Series LCD M onitor User Manual Document 800-00718 Rev A 23 07/07 Note: technical specifications and parts are subject to change without not ice. Stereo Cable 1 VGA Cable 1 Power Adapter 1 User Manu.
24 Troubleshooting Troubleshooting Issue: No image is displayed on screen. Possible Solution: • Check that the power cord has been connected securely into the wall outlet or grounded exte nsion cable or su rge protector. • Power switch should be in the ON position and the LED should be lit.
NOTES:.
Honeywell Video Syst ems (Head Offi ce) 2700 Blankenbaker Pkwy, Suite 1 50 Louisville, KY 40299, USA www.honeywellvideo.com ℡ +1.800.796.2288 Honeywell Secur ity Australia Pty Ltd. Unit 5, Rivers ide Centre, 24-2 8 River Road West Parramatta, NSW 2150, Australia www.
デバイスHoneywell HMLCD19e2の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Honeywell HMLCD19e2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHoneywell HMLCD19e2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Honeywell HMLCD19e2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Honeywell HMLCD19e2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Honeywell HMLCD19e2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHoneywell HMLCD19e2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Honeywell HMLCD19e2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHoneywell HMLCD19e2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。