HoneywellメーカーHWC-ARM-WEH-QSの使用説明書/サービス説明書
ページ先へ移動 of 16
Arm Mount Sled Wearable Solution for Dolphin 70e Black Quick Start Guide HWC-ARM-WEH-QS Rev A 12/14 Aller à www.honeywellaidc.com pour le français. Vai a www.honeywellaidc.com per l'italiano. Gehe zu www.honeywellaidc.com für Deutsch. Ir a www.
Getting Started The Arm Mounted Sled is a device that is used with the wearable version of the Dolphin 70e Black (Honeywell Wearable Solution). For information about the Dolphin 70e Black, refer to the quick start packaged with the terminal. This document is designed to assist t he user who is wearing the wearable Dolphin 70e Black on an arm.
The arm band can be washed between uses. Be sure to remove the sled from the arm band before washing the arm band. Getting to Know the Arm Mount Sled The sled encases theDolphin 70e Black and helps protect the terminal from impacts.
Removin g the Dolphin 70e Black fr om the Sled 1. If the audio end cap is used, remove the audio cable. To prevent damage to the Dolphin 70e Black always unplug the audio cable (if us ed) before removing th e end cap. 2. Slide the lock down to release the end cap.
Removing the Battery 1. Remove the Dolphin 70e Black from the sled before changing the bat- tery. 2. Place the terminal in Suspend mode by p ressing and releasing the Power button . 3. Perform the steps illustrated below to remove the battery. 5. Slide the Dolphin 70e Black out of the sled.
Installing the Battery The Dolphin 70e Black wearable model is designed for use with battery part numbers BAT-STANDARD-02 (Li-ion 3.7 V, 6.179 watt hour) and BAT- EXTENDED-02 (Li-ion 3.7 V, 12.358 watt hour) manu factured for Honeywell International Inc.
T urning P o wer On/Off To turn the terminal On , press and release the Power button . To turn the terminal Off : 1. Press and hold the Power button for approximately 4 seconds until the Options menu displays.
Placing Dolphin 70e Blac k into the Sled 1. If the end cap is installed on the sled, slide the lock down to release the end cap. 2. Push up on the right side (the side with the lock) of end cap. Do not attempt to remove the end cap without sliding the lock first! 3.
5. Press until the door is flush with the side of the terminal. 6. Slide the Dolphin 70e Black into the sled. 7. If using the audio end cap, make sure audio jack door is open. Pull the rubber door out and rotate the door 180º as shown to prevent damage.
Attaching the Headset (Optional) 9. Slide the end cap straight onto the sled until it clicks in place. 10. Slide the lock closed to secure the end cap. 1. Make sure the audio jack door is open as shown in the previous section. 2. Slide the 3.5mm audio connector into the end cap.
Connecting the Ring Scanner (Optiona l) 3. Attach the quick disconnect end of the headset adapter cable to the headset’s cable. 4. Slide the cable ends together until they click. Do not twist or bend the connectors. 1. Slide the ring scanner cable connector into the bottom of the sled until the connector ring clicks shut.
Ejecting the Ring Scanner Mounting the Arm Band Note: T he illustr ations in th is procedure assume the sl ed has not ye t been mounted to the arm band .
4. Ensure the latch on each buckle is through a hole in the strap. 1. If there is excess strap length: • Loop the excess strap behind the horns on the sled, as shown, or • Trim the straps to leng th and use the provided clips to terminate the strap end.
2. Align the sled assembly with the ar m band and press on the sled u ntil it latches onto the arm band. Be sure to align tabs on the back of sled wit h the notches on the arm ban d. The end of the sled with the ring scanner connector must face toward the hand.
Resetting the terminal There are three types of system resets: a soft reset, a hard reset, or a factory reset. The soft and hard resets preserve all data stored in the file system. Contact a Honeywell technical support r epresentative for more information on how to perform a factory reset.
T echnical Assistance Contact information for technical suppor t, product service, an d repair can be found at www.honeywellaidc.com . User Documentation For localized versions of this document, and to download the U ser’s Guide, go to www.honeywellaidc.
デバイスHoneywell HWC-ARM-WEH-QSの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Honeywell HWC-ARM-WEH-QSをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHoneywell HWC-ARM-WEH-QSの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Honeywell HWC-ARM-WEH-QSの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Honeywell HWC-ARM-WEH-QSで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Honeywell HWC-ARM-WEH-QSを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHoneywell HWC-ARM-WEH-QSの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Honeywell HWC-ARM-WEH-QSに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHoneywell HWC-ARM-WEH-QSデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
