IcomメーカーIC-7200の使用説明書/サービス説明書
ページ先へ移動 of 19
When the transceiv er is connected to a PC with the USB cable , the f ollowing operations can be performed; • Remote control operation (CI-V : Icom Communica- tion Interf ace-V) by the PC . • Modulation input from the PC. • Received audio output to the PC .
2 PROCEDURE Ref er to the f ollowing steps f or the USB driver installation. Bef ore installing the USB driver , log in as the administrator and quit all applications when Windows is run- ning. Overview • System requirements (p . 1) • Item requirements (p .
3 Before installing the USB driver Icom HP giv es the USB driver download service. Bef ore installing the USB driver , download the f ollow- ing compressed file. • USB dr iver (File name: 7200UsbDrv_v100.zip) Icom is not responsible f or any damage or lack of data resulting from the use of the USB driver .
4 Windows Vista DRIVER INST ALLA TION The displa yed dialogue bo x es, indications or oper- ations ma y differ slightly from the following instr uc- tions according to y our system conditions or envi- ronment. q Make sure that the transceiver is not connected to the PC .
5 o After restar ting the PC, connect the transceiver to the PC with the USB cable (third party) as shown below . • Be sure to connect the USB cable correctly and not up- side down. T ransceiver PC USB cable (third par ty) T o USB jack T o USB por t Type A Type B ACC K E Y SEN D AL C REM OT E !0 T urn the transceiver power ON.
6 The displa yed dialogue bo x es, indications or oper- ations ma y differ slightly from the following instr uc- tions according to y our system conditions or envi- ronment. q Make sure that the transceiver is not connected to the PC . w Star t up Windows.
7 Windows XP (Contin ued) DRIVER INST ALLA TION i Select the “Win” f older, then click [OK]. • The folder construction: “7200UsbDrv_v100” ➞ “Driver” ➞ “Win” Click Select o Clic k [Ne xt>]. Click !0 The Wizard star ts searching f or the driver and shows the dialogue below during search.
8 !6 Select “Install from a list or specific location (Adv anced), ” then click [Ne xt>]. Click Select !7 Select “Search f or the best driv er in these locations . ” then select “Include this location in the search:”, and click [Browse].
9 The displa yed dialogue bo x es, indications or oper- ations ma y differ slightly from the following instr uc- tions according to y our system conditions or envi- ronment. q Make sure that the transceiver is not connected to the PC . w Star t up Windows.
10 Windows 2000 (Continued) DRIVER INST ALLA TION o Select “slabb us.inf” in the “Win” folder , then click [Open]. • The folder construction: “7200UsbDrv_v100” ➞ “Driver” ➞ “Win” Select “slabbus .inf ” Click !0 Clic k [OK].
11 Windows 2000 (Continued) DRIVER INST ALLA TION !6 Clic k [Browse ...]. Click !7 Select “slabw2k.inf ” in the “Win” f older , then clic k [Open]. • The folder construction: “7200UsbDrv_v100” ➞ “Driver” ➞ “Win” Click Select “slabw2k.
12 COM PORT CONFIRMA TION Windows Vista q Star t up Windows . w Right click “Computer , ” then select “Proper ties. ” • “Computer” is av ailable in <Start> menu. e “System” screen appears as below . Click [De vice Manager]. Click r In case “User Account Control” dialogue bo x ap- pears as below , click [Contin ue].
13 DRIVER UNINST ALLA TION The display ed dialogue box es or indications ma y differ slightly from the follo wing instr uctions according to your system conditions, or en vironment. Windows Vista q Star t up Windows . w Select the “Control P anel” in the Star t menu.
14 FOR Y OUR REFERENCE COM P ort setting T o ch ange the COM P or t n umber settin g, co nnect the trans ceiv er t o the PC and then turn the tr ansceiv er po wer ON after the driver installation is completed. Windows Vista q Star t up Windows . w Right click “Computer , ” then select “Properties.
15 FOR Y OUR REFERENCE COM P or t setting (Continued) Windows XP For Windo ws 2000: Ref er to the f ollowing instructions because the operations of Windows 2000 are similar to Windows XP . q Star t up Windows. w Right click “My Computer , ” then select “Properties.
16 FOR Y OUR REFERENCE (Continued) About audio When the transceiv er is connected to a PC with the USB cable (third party), the follo wing oper ations can be perf or med; • Received audio output to the PC .
17 FOR Y OUR REFERENCE About audio (Continued) The modulation input settings T o input the audio sign al from the US B jac k of the t ransceiv er , set t he modulati on input connector as “USB” in the set mode item ‘Modulation input (Data OFF)’ or ‘Modulation input (Data ON)’, or CI-V system (command).
18 FOR Y OUR REFERENCE About audio (Continued) USB level setting Set the input modulation le vel of the USB jac k in the set mode item ‘USB Lev el’ or CI-V system (command). <Set mode> q Push and hold M-CH/RIT SET for 1 sec. twice to enter the set mode.
19 FOR Y OUR REFERENCE (Continued) Specifications Connector type USB B type Interf ace USB 2.0/1.1 P ow er supply Self power The PC cannot recognize the transceiv er when the pow er is OFF . Suppor t OS Windows Vista Windows XP Windows 2000 Serial for CI-V Compliant f or CI-V spec.
デバイスIcom IC-7200の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Icom IC-7200をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIcom IC-7200の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Icom IC-7200の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Icom IC-7200で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Icom IC-7200を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIcom IC-7200の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Icom IC-7200に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIcom IC-7200デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
