ImageメーカーIMTL12900の使用説明書/サービス説明書
ページ先へ移動 of 34
USER'S MANUAL ® Serial Number Decal Model No. IMTL12900 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this man- ual for future reference. Write the serial number in the space above for future reference.
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note: To identify the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual. P ART LIST—Model No. IMTL12900 R0302A Key No.
Cooling Down Finish each workout with 5 to 10 minutes of stretching to cool down. This will increase the flexibility of your muscles and will help to prevent post-exercise problems. Exercise Frequency To maintain or improve your condition, complete three workouts each week, with at least one day of rest be- tween workouts.
ASSEMBL Y Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dis pose of the packing materials until assembly is completed. A rubber mallet may be needed for assembly. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
HOW TO PUT ON THE HEART RATE MONITOR The heart rate monitor consists of two components: the chest strap and the sensor unit (see the drawing below). Insert the tab on one end of the chest strap through the hole in one end of the sensor unit. Press the end of the sensor unit under the buckle on the chest strap.
OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features to help you get the most from your exercise. When the console is in the manual mode, the speed and incline of the treadmill can be changed with a touch of a button.
DIAGRAM OF THE CONSOLE Refer to the drawing on the opposite page. Note: The console can display exercise feedback in either miles or kilometers. For simplicity, all instructions in this section refer to miles.
HOW TO TURN ON THE POWER Make sure that the on/off switch, located on the front of the treadmill, is in the on position. Next, make sure that the power cord is properly plugged in (see page 7). Stand on the foot rails of the treadmill. Find the clip attached to the key and slide the clip onto the waistband of your clothes.
Adjust the speed and incline of the treadmill. While the walking belt is moving, adjust the speed of the walking belt by pressing the Speed buttons. Each time one of the but- tons is pressed, the speed will change by 0.1 mph. If the buttons are held down, the speed will change in increments of 0.
HOW TO USE PERFORMANCE PROGRAMS Insert the key into the console. See HOW TO TURN ON THE POWER on page 10. Select one of the performance programs. When the key is inserted, the manual mode will be selected and the manual indicator will light.
To stop the program temporarily, press the Stop button. All displays will pause and the Time/ Segment Time display will begin to flash. To restart the program, press the Start button. To end the program, press the Stop button, remove the key, and then reinsert the key.
Put on the heart rate monitor. The heart rate monitor must be worn when a pulse program is used. See HOW TO USE THE HEART RATE MONITOR on page 6. Note: A pulse pro- gram can be started without a heart rate reading; however, the speed and/or incline of the treadmill will automatically decrease if your heart rate is not detected during the program.
HOW TO CREATE A CUSTOM PROGRAM Insert the key into the console. See HOW TO TURN ON THE POWER on page 10. Select one of the custom programs. When the key is in- serted, the manual mode will be selected and the manual indi- cator will light.
HOW TO USE A CUSTOM PROGRAM Insert the key into the console. See HOW TO TURN ON THE POWER on page 10. Select one of the custom programs. When the key is in- serted, the manual mode will be selected and the manual indi- cator will light.
HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CD’s , the treadmill must be con- nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 17 and 18 for connecting instructions.
HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord.
HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 18.
If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program.
HOW TO USE PROGRAMS DIRECTLY FROM OUR INTERNET SITE Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are soon to be available. See www.iFIT.com for details.
THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill.
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Hold the lock knob with your left hand and pull it to the side. Pivot the treadmill down a few inches. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor.
TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.
PROBLEM: The walking belt is off-center SOLUTION: a. If the walking belt has shifted to the left, first re- move the key and UNPLUG THE POWER CORD . Using the allen wrench, turn the left rear roller adjust- ment bolt clockwise, and the right bolt counterclock- wise, 1/4 of a turn each.
PROBLEM: The heart rate monitor does not function properly SOLUTION: a. If the heart rate monitor does not function properly, see HEART RATE MONITOR TROUBLE- SHOOTING on page 6. b. If the heart rate monitor still does not function properly, the battery should be changed.
CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. Remember—these are general guide- lines. For more detailed information about exercise, obtain a book or consult your physician.
Thank you for selecting the IMAGE ® 10.4QL treadmill. The IMAGE 10.4QL treadmill combines advanced technology with innovative design to let you enjoy an effective form of cardiovascular exercise in the conve- nience and privacy of your home. And when you’re not exercising, the unique IMAGE 10.
3 17. The heart rate monitor is not a medical de- vice. Various factors, including the user's movement, may affect the accuracy of heart rate readings. The heart rate monitor is in- tended only as an exercise aid in determining heart rate trends in general.
Key No. Qty. Description Key No. Qty. Description 101 1 Circuit Breaker 102 1 Power Cord 103 1 Power Cord Grommet 104 1 Warning Decal 105 1 Chest Pulse Sensor 106 1 Jack 107 1 iFIT.
Part No. 167205 R0302A Printed in USA © 2002 ICON Health & Fitness, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire IMAGE ® 10.4QL (“Product”) is warranted to be free of all defects in material and work- manship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
1 84 21 9 40 4 5 6 4 7 8 7 10 11 12 13 14 15 17 16 18 20 22 23 24 20 25 26 27 28 29 30 11 2 26 100 101 103 102 36 32 33 34 35 99 99 26 27 26 37 38 15 14 13 40 9 10 39 40 40 40 41 40 40 4 1 2 89 45 44 .
60 59 61 108 62 64 63 67 65 79 99 99 99 63 68 69 71 72 70 76 78 77 73 13 98 99 80 81 82 40 83 40 75 40 60 59 61 13 76 77 78 98 99 73 13 86 87 87 91 31 93 13 94 95 97 96 105 66** 106 107 104 85 108 51 40 40 75 75 92 1 10* 111 EXPLODED DRA WING—Model No.
デバイスImage IMTL12900の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Image IMTL12900をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはImage IMTL12900の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Image IMTL12900の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Image IMTL12900で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Image IMTL12900を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はImage IMTL12900の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Image IMTL12900に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちImage IMTL12900デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
