IntelメーカーNSW1Uの使用説明書/サービス説明書
ページ先へ移動 of 21
Intel® IP Network Server Intel® NSW1U (1Ux20”D) Configuration Guide System / Spares / Accessories List Rev 1.2 A reference guide to assist customer s and the field in ordering these servers, acces.
May 2007 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IM PLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
5/18/2007 v1.2 3 of 21 Document Table of Contents I. CHANGE HISTORY 6 II. INTRODUCTION 7 III. PRODUCTION SKUS 9 IV. PRODUCTION SPARES/ACCESSORY LIST 17 V. ADDING BYPASS ETHERNET PORTS 21 VI. DOCUMENTATION 23 APPENDIX A. BASE MODEL 0 SYSTEMS CONFIGURATION 24 APPENDIX B.
5/18/2007 v1.2 4 of 21 I. Change History Revision Date Comments 1.0 11/10/2006 Original version. 1.1 3/19/2007 Updated at SRA. Added Front NIC B ypass SKU.
5/18/2007 v1.2 5 of 21 II. Introduction The Intel® IP Network Server NSW1U system is the first 1U rack mount server to join the Intel® IP Network Server family , characterized by having long product life and a 20” depth chassis. The NSW1U uses the Dual-Core Intel® Xeon® Processor 5100 Series with 4M cache, and supports a number of CPU speeds.
5/18/2007 v1.2 6 of 21 III. Production SKUs Intel IP Network Servers: Production NSW1U Server – Rear NIC (AC Supply) - Product Code NSWA0201W Production NSW1U Server – Rear NIC (DC Supply) - Produ.
5/18/2007 v1.2 7 of 21 Special instructions for Ordering of Processors: The NSW1U supports a range of processo r speeds from 1.6 GHz to 3.0 GHz. Ordering details for the CPU for use in NSW1U are listed below , and incl udes both Tray (for OEMs) and Boxed (Retail chan nel) processors.
5/18/2007 v1.2 8 of 21 The Production SKUs that can be ordered (see Appendix A for c ontent of each SKU) are listed below. PID Order Code Description MM# Minimum Order Size NSWA0201W Intel® IP Netw ork Server NSW1U, 1U, Rear NIC , Base Model 0*. Includes 450W AC Power Supply .
5/18/2007 v1.2 9 of 21 IV. Production Spares/Accessory List Below are the Spares parts and Accessories that may be ordered with the NSW1U system. Any of these parts may be ordered as spares for part replacement purposes or as additional customer inve ntor y.
5/18/2007 v1.2 10 of 21 Production Spares/Access ories List (continued) PID Order Code Description Contents Included in Base Model (Y/N) MM# Minimum Order Size NSWFBZL01W NSW1U Bezel - Rear NI C Bezel.
5/18/2007 v1.2 11 of 21 V. Adding Bypass Ethernet ports The NSW1U comes standard with 4 Gb Ethern et ports either in the front or rear of the chassis. By adding the Intel® Pr o/1000 PT or PF Quad Port Bypass Server Adapter, four additional ports of Gbit e thernet (either Coppe r or Fiber) may be added.
5/18/2007 v1.2 12 of 21 VI. Documentation More Product Details: Check the following web site for more information on the TIGW1U: http://www.intel.com/design/telecom /products/cbp/ipserver/9979/overview.
5/18/2007 v1.2 13 of 21 Appendix A. Base Model 0 Systems Configur a t ion All Production SKUs are base model 0 SKUs (no CPU, heatsink, memory, hard drive or plug-in adapters are provided).
5/18/2007 v1.2 14 of 21 Appendix B. Rack Mounting Options for 1U and 2U Intel® Communications Rack Mount Servers Rack mounting kits for 2-po st or 4-post, 19-inch or 23- inch racks are offered for this product. Please refer to the tables be low for the correct op tions to suit your needs.
5/18/2007 v1.2 15 of 21 TMLCMOUNT21 The TMLCMOUNT21 kit mounts Intel® Comm unication Rack Mount Servers to a 2- post, central office type, 19” wide rack. This kit consists of simple L-shaped brackets; which fasten to the side s of the server and to the rack.
5/18/2007 v1.2 16 of 21 TMLPMOUNT41, TMLPMOUNT51 and TMLPMOUNT52 TMLPMOUNT 41/51/52 series mounts Intel® Communication Rack Mount Servers to 2-post or 4-post racks. TMLPMOUNT 41 and TMLPMOUNT 51 are used for mounting servers on 19” wide racks. These racks are considered standard EIA (universal hole s pacing) racks.
5/18/2007 v1.2 17 of 21 4. EIA-Wide spacing doesn't have the inters ti tial hole that is present in EIA- Universal. TMLPMOUNT51 contains an adapter bracket to overcome this EIA-Wide issue.
5/18/2007 v1.2 18 of 21 The diagrams above summarize the components and “slide-in rail-type” system of the TMLPMOUNT41. It can be adapted for a 2-post or 4- post installation.
5/18/2007 v1.2 19 of 21 The main difference between the TMLPMOUNT 41 and TMLPMOUNT 51/52 series is that the TMLPMOUNT 41 series uses a screw to lock the server in place via the Universal Mounting Bracket, whilst the TMLPMOUNT 51/52 series has an additional Slide Pull-Out Locking feature.
5/18/2007 v1.2 20 of 21 TMLPSLIDE01 The TMLPSLIDE01 is an accessory kit designed for use in conjunction with sl ide rails to produce a rack mounted serviceable server. The TMLPSLIDE01 kit contains two Universal Front Mounting Brackets that s ecure the server to the front of the rack.
5/18/2007 v1.2 21 of 21 Customers should order RoHS items for shipments going to the European Union (EU). Although these mounts have been designed for industry standard racks, please consult with your Intel Field Application or Sales Engine er before selecting racks for these servers.
デバイスIntel NSW1Uの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Intel NSW1Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIntel NSW1Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Intel NSW1Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Intel NSW1Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Intel NSW1Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIntel NSW1Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Intel NSW1Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIntel NSW1Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。