IntelメーカーSB-6862の使用説明書/サービス説明書
ページ先へ移動 of 37
i SB-6862 T echnical Refer ence SB-6862 Dual Pentium ® Pro Single Board Computer with Natoma Chipset 1641 McGaw A venue Irvine, California 92614.
ii SB-6862.
iii SB-6862 Feature s Intel Pentium ® Pro processor , upgradeable through 180 or 200 MHz; and dual Pentium ® Pro upgrade Intel Natoma chipset Basic connectors provided for speakers, hard.
iv SB-6862 FCC Standards The FCC (Federal Communications Commission) restricts the amount of radiation and radio frequency emissions coming from computing equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
v SB-6862 T o ensure compliance to FCC non-interference regulations, peripherals attached to this device require shielded I/O cables. NOTICE: The use of a non-shielded I/O cable with this device is in violation of U.S. Federal law and will not allow the device to meet the maximum emission limits.
vi SB-6862 W ARNING CAUTION: THERE IS A DANGER OF EXPLOSION IF THE BA TTER Y IS INCORRECTL Y REPLACED. REPLACE ONL Y WITH THE SAME OR EQUIV ALENT TYPE RECOMMENDED BY THE MANUF ACTURER. DISCARD USED BA TTERIES ACCORDING T O T HE MANUF ACTURERS INSTRUCTIONS.
vii SB-6862 NOTICE The information within this manual is subject to change without notice. CSS Laboratories, Incorporated shall not be held liable for technical or editorial errors or omissions contained in herein; nor for incidental or consequential damages resulting from the furnishing, performance or use of this material.
viii SB-6862.
ix SB-6862 T able of Contents Overview ............................................................................... 1 The Microprocessor .............................................................. 2 The Board ....................................
x SB-6862.
1 SB-6862 Overview This document describes the technical features of the board. The topics include: The Microprocessor - description of the features of the Pentium ® Pro microprocessor Board .
2 SB-6862 The Micropr ocessor The Pentium Pro microprocessor contains all the features of the Pentium and 80486 processors, and is 100% compatible with 8086/88, 80286, and 80386 DX and SX microprocessors.
3 SB-6862 The Board Figure 1: The Board VOLTAGE REGULATORS 1 1 Processor Dual Processor 1 1 1 DIMM 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 FLASH U57 U58 U59 U60 JP45 JP26 JP27 JP32 JP31 .
4 SB-6862 V oltage Regulator Module A voltage regulator module installed on the board ensures that the correct voltage is provided to the particular processor installed. When up grading to the faster grade of Pentium processor , make sure to have the appropriate voltage regulator installed.
5 SB-6862 Board Connectors Keyboard Connector K1 Keyboard plugs are keyed for proper installation. Primary IDE Drive Header J1 1 J1 1 is the connector for the primary on-board PCI IDE drive controller . Pin 1 is marked. When connecting your hard drive, orient the cable s pin one with pin 1 of J1 1.
6 SB-6862 Secondary IDE Drive Header J12 J10 is the connector for the secondary on-board PCI IDE hard drive controller . Pin 1 is marked. Use this to cable your IDE hard drive. When connecting your hard drive, orient the ribbon s pin one with pin 1 of J71.
7 SB-6862 Fan Connectors JP18, JP45 These fans provide cooling for the powerful Pentium Pro processors. JP45 connects to the primary processor s fan.
8 SB-6862 Jumpers The board s jumpers are pre-configured at the factory . Read the following section carefully , before configuring your system. The board has the following jumpers: Processor Bus Clock Speed JP4, JP3 Pentium Pro processors are designed with one of two bus clock speeds.
9 SB-6862 Processor Bus Frequency JP26, JP27 JP26 and JP27 synchronize the processor bus frequency with the processor s speed. Processor Speed Ratio JP32, JP31, JP30, JP29 The Pentium Pro uses a clock multiplier to run at a speed faster than the processor bus.
10 SB-6862 The following table matches processor speed, processor clock and the board s processor bus speed: Processor Clock Ratio Processor T ype/Speed Bus Speed 180 MHz 3x 60 MHz 200 MHz 3x 66 MH.
11 SB-6862 System Memory There are a total of four banks available for memory upgrades. The board supports DIMM in the following combinations: 1M x 64/72 = 8 MB/bank 2M x 64/72 = 16 MB/bank 4M x 64/72.
12 SB-6862 System Memory Configuration RAM Bank 0 Bank 1 Bank 2 Bank 3 8 MB 1M x 64/72 16 MB 1M x 64/72 1M x 64/72 16 MB 2M x 64/72 24 MB 1M x 64/72 1M x 64/72 1M x 64/72 24 MB 1M x 64/72 2M x 64/72 3.
13 SB-6862 RAM Bank 0 Bank 1 Bank 2 Bank 3 88 MB 8M x 64/72 1M x 64/72 1M x 64/72 1M x 64/72 96 MB 4M x 64/72 4M x 64/72 4M x 64/72 96 MB 4M x 64/72 8M x 64/72 104 MB 1M x 64/72 4M x 64/72 4M x 64/72 .
14 SB-6862 RAM Bank 0 Bank 1 Bank 2 Bank 3 272 MB 32M x 64/72 1M x 64/72 1M x 64/72 272 MB 32M x 64/72 2M x 64/72 272 MB 2M x 64/72 16M x 64/72 16M x 64/72 280 MB 32M x 64/72 1M x 64/72 1M x 64/72 1M .
15 SB-6862 System Memory Map Timers The system has three programmable timers/counters controlled by timer/counter chips and defined as channels 0 through 2 as follows: Channel 0: System T imer Channel.
16 SB-6862 System Interrupts The processor has two controllers, supplying 16 IRQs. Below are assignments in decreasing priority . LEVEL FUNCTION Microprocessor NMI Parity or I/O Channel Check Interrup.
17 SB-6862 Controller 1 Controller 2 Channel 0 - Spare Channel 4 - Cascade for Controller 1 Channel 1 - SDLC Channel 5 - Spare Channel 2 - Diskette Channel 6 - Spare Channel 3 - Spare Channel 7 - Spare Note: IRQ9, IRQ10, IRQ1 1, IRQ12, IRQ15, IRQ3, IRQ4, IRQ5 and IRQ7 can be redirected to PCI add-in boards.
18 SB-6862 The I/O Address Map Address (hex) Function 000-01F DMA #1 020-03F INTR #1 040-05F T imer 060-06F Keyboard 070-07F NMI mask register 080-09F DMA page register 0A0-OBF INTR #2 0C0-ODF DMA #2 .
19 SB-6862 Configuration Utilities Overview The BIOS Setup utility stores your system s configuration. The utility described below provides a bridge to PCI slots in excess of the four allowed by current standards. When your system boots, it s configuration is read into main memory .
20 SB-6862 The most commonly accessed selections are Standard CMOS Setup, Advanced CMOS Setup, Advanced Chipset Setup, Power Management Setup PCI/Plug and Play Setup, and Peripheral Setup. Standard Setup This utility allows you to record your system setup.
21 SB-6862 Pri Slave Primary slave IDE/PCI hard drive. Define the parameters of your hard disk and modes. The default setting is Auto, to auto-detect drive type. Sec Master Secondary master IDE/PCI hard drive, if installed. Define the parameters of your hard disk and modes.
22 SB-6862 Advanced Setup Advanced Setup allows you to fine tune some of the special features. These features are pre-set for you at the factory . Double-click the Advanced Setup icon on the Main Menu. Use the arrow keys to toggle between items. A vailable options for the highlighted item are displayed on the right side of the menu.
23 SB-6862 Advanced Chipset Setup This option lets you configure some of the advanced features of your particular system through the chipset. It was pre- configured at the factory and need not be altered. Double- click on the Chipset Setup icon on the Main Menu.
24 SB-6862 Power Management Setup This utility lets you set the green functionality parameters. Instant On Timer is a green mode timer letting you wake the system up as it is triggered. IRQ3, 4, 5, 7, 9, 10, 1 1, 12, 13, 14, 15 can be ignored or monitored.
25 SB-6862 PCI/PnP Setup This menu allows you to define attributes of the PCI bus portion of the motherboard. Use the arrow keys to toggle between items. A vailable options for the highlighted item are displayed on the right side of the menu. Press <PgUp> or <PgDn> to toggle through available options.
26 SB-6862 Peripheral Setup This menu allows you to specify the peripherals installed on your motherboard. On-board IDE enables the on-board chipset E-IDE function. Use the arrow keys to toggle between items. Press <Enter> to access the drop down selection menu.
27 SB-6862.
デバイスIntel SB-6862の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Intel SB-6862をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIntel SB-6862の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Intel SB-6862の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Intel SB-6862で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Intel SB-6862を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIntel SB-6862の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Intel SB-6862に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIntel SB-6862デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。