IntelメーカーXP-P4IM533GVの使用説明書/サービス説明書
ページ先へ移動 of 25
M-040402 XP-P4IM533GV Intel ® Pentium ® 4 Processor Motherboard User's Manual.
Motherboard XP-P4IM533GV May 11, 2004 May 1 1, 200 4 XP-P4IM533GV Motherboard Copyright Declaration ©2004 Gigatrend T echnology Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without express permission from Gigatrend T echnology .
Contents Motherboard Layout .......................................................................... 4 1. Production Introduction ............................................................... 5 1.1. Feature Summary ................................
4 English Motherboard Layout KB_MS COMA SOCKET 478 AT X LPT USB LAN FDD F_P ANEL F_USB1 PWR_LED BA T 1 ICH4 PCI1 PCI2 PCI3 CODEC IT8712 BIOS XP-P4IM533GV CPU_FAN VGA CD_IN A TX_12V Intel 845GV IDE2 DD.
English 5 CPU Socket 478 for Intel ® Pentium ® 4 (Northwood) with HT T echnology Intel ® Pentium ® 4 400/533MHz FSB 2nd cache depends on CPU Chipset North Bridge: Intel ® 845G V South Bridge: Intel ® ICH4 Memory 2 184-pin DDR DIMM sockets, supports up to 2GB DRAM (Max) Supports DDR333*/DDR266 DIMM Supports only 2.
6 English 1.2. I/O Back Panel and Connectors&Jumper Setting 1.2.2. Connectors&Jumper Setting FDD (Floppy Disk Drive Connector) The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one edge of the FDD cable is marked in red, please attach this marked edge to position 1 on the connector.
English 7 CPU_F AN (CPU Fan Power Connector); SYS_F AN (System Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin power connector and possesses a ful-proof connection design. Most coolers are designed with color-coded power connector wires.
8 English F_AUDIO (Front Audio Connector) Connects to the audio connector located on the front panel of the system casing (dependent on case design). When use of the front panel audio connector is required, please remove the 5-6 pin, 9-10pin jumper.
English 9 2. Hardware Installation 2.1. Installation of a Pentium 4 CPU and Fan Sink 1. Please make sure that the CPU used is supported by your motherboard. 2. Please be aware of the placement position of the CPU. If the CPU does not insert properly, do not apply force but check the placement position.
10 English 4 Connect the 3-pin cooler power connector to the CPU Fan connector located on the motherboard. 2.2. Installation of Memory 1. Before installing or removing memory, please make sure that the computer power is turned off to prevent hardware damage.
English 11 2.4.1. Graphics Card Support List (The items below are all supported under the Windows XP operating system. When using an add-on graphics card, please first delete the onboard graphics driver before installing the driver for the add-on graphics card.
12 English Graphics Chip Maker Model Name Nvidia ASUS V9180TD ASUS V9480-TVD ASUS V9520 MSI MX440-VTD8X MS-8888 MSI Ti4600-TD-8X Leadtek WinFast A280LE TD Leadtek WinFast A310 TD Albatron NVIDIA 5950 .
English 13 3. BIOS Setup BIOS (Basic Input and Output System) stores all the information of the motherboard settings that is needed for system initiation within the CMOS. The CMOS SETUP utility allows the user to make changes in BIOS configurations that are required or to activate certain features.
14 English <F6> Gives the list of options available for each item <F7> Return to Optimized default values (not applicable to main setup screen) <F8> Enters Expert-Flash feature <F9> Displays system information <F10> Saves settings and exits setup 3.
English 15 n n n n n Floppy 3 Mode Support Allows user to configure a Japanese standard 3 Mode floppy drive. Options: Disabled (No 3 Mode drive installed) Drive A (3 Mode Drive installed in A:) Drive .
16 English " # " If the installed CPU is an Intel Pentium 4 CPU supporting Hyper-Threading Technology, the system will automatically provide this option. 3.3. Advanced BIOS Features ø Allows the configuration of advanced settings such as boot sequence, password check, etc.
English 17 3.4. Integrated Peripherals ø This menu allows you to control the various ports of the computer such as IDE, SA T A, USB, IEEE1394, COM port, LPT port, AC97 audio, etc. n n n n n On-Chip Primary PCI IDE Allows the user to enable or disable the first onboard IDE channel.
18 English n n n n n USB Controller Allows the user to enable or disable the onboard USB2.0 controller. (default:Enabled) n n n n n USB Keyboard Support Allows user to use a USB-based keyboard (Enable.
English 19 3.5. Power Management Setup ø This is used to control the various power saving features of the PC. n n n n n ACPI Suspend T ype Allows user to select the Advanced Configuration and Power I.
20 English 3.6. PnP/PCI Configuration ø This menu allows you to configure your PCI slots. Y ou can assign IRQ's for various PCI slots. n n n n n PCI 1 IRQ Assignment Allows you to assign an IRQ for the first PCI slot.
English 21 3.7. PC Health Status ø This menu displays the current CPU temperature, the fan speeds, voltages etc. n n n n n Current Voltage(V) Vcore / DDR25V / +3.
22 English 3.8. Frequency/V oltage Control ø This allows user to configure CPU frequency and voltage settings. ø This section is very dangerous for inexperienced users, and therefore it is not recom mended that these settings be altered. An incorrect setting can result in system instability , corrupt data, or permanent hardware damage.
English 23 n n n n n Host/DRAM Clock Ratio Allows the user to set the Host/DRAM Clock Ratio. If the FSB(Front Side Bus) is at 400MHz. 2.66 Memory Frequency = Host clock x 2.66. Auto Automatically sets memory frequency. (default:Auto) If the FSB(Front Side Bus) is at 533MHz.
24 English 3.9. T op Performance ø "T op Performance" allows faster system start. However , the result may differ depending on system specifications (includes hardware and OS). For example, certain hardware may become unstable under Windows XP but work reliably under the Windows NT operating system.
English 25 4. Driver Installation Driver installation for the Windows 98/98SE/200/ME/XP operating systems is simple. Once you insert the provided driver disks into your optical drive, the AUTORUN screen will appear . If this screen does not appear, you can use "D:setup.
デバイスIntel XP-P4IM533GVの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Intel XP-P4IM533GVをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIntel XP-P4IM533GVの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Intel XP-P4IM533GVの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Intel XP-P4IM533GVで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Intel XP-P4IM533GVを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIntel XP-P4IM533GVの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Intel XP-P4IM533GVに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIntel XP-P4IM533GVデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。