JBL ProfessionalメーカーDSC 280の使用説明書/サービス説明書
ページ先へ移動 of 4
Product Technical Notes DSC 280 Programming MIDI Sysex and PCMCIA Card File Transfers There are two ways to update and transfer programs into and out of the DSC 280. These are by MIDI System Exclusive and by PCMCIA (PC) card. The procedures for each of these actions are detailed below.
Transfers Via MIDI Sysex using an external computer: 1. Connect the MIDI OUT of the computer to the MIDI IN of the Receiving DSC. 2. Make sure the MIDI channel is the same on both the computer and Receiving Unit. 3. In the “Utility” menu of the receiving unit, select Lock Mode to “OFF” using the Up and Down Arrow keys.
Storing a Complete Set of Programs to PC Card With the power disconnected, take out the eight Posi-drive screws on the top of the DSC 1. Plug the PC Card into the slot located in the front left of the unit located behind the meter panel. The Slot is keyed so the card can only be seated in one direction.
Troubleshooting Q. When I try to confirm a file transfer, some of the buttons do not work. A. Lock mode is On. Go to the Utility screen and turn Lock Mode off. Q. I cannot write to the PC Card, I get a message saying write protected. A. PC cards have a write protect tab on them.
デバイスJBL Professional DSC 280の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JBL Professional DSC 280をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJBL Professional DSC 280の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JBL Professional DSC 280の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JBL Professional DSC 280で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JBL Professional DSC 280を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJBL Professional DSC 280の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JBL Professional DSC 280に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJBL Professional DSC 280デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。