JBLメーカーVT4881の使用説明書/サービス説明書
ページ先へ移動 of 20
Array Applications Manual For models VT4889, VT4888, VT4887, VT4881, VT4880.
Page 2 TABLE OF CONTENTS PAGE GENERAL AMPLIFICATION NOTES & REQUIREMENTS…………………. 3 SUBWOOFER WIRING NOTES………………………………………………… 4 STANDARD AMPLIFICATION RACK LIMITER SETTINGS NOTES …………….…………………………….
Page 3 GENERAL AMPLIFICATION NOTES & REQUIREMENTS • For the purpose of this discussion: Crown MA series amplifiers are used below. HF indicates High Frequency drivers, MF indica tes Mid Frequency drivers, LF indicates Low Frequency drivers and VLF stands for Ve ry Low Frequency drivers (subwoofers).
Page 4 NOTES ON SUBWOOFER WIRING • VT4880: Users may choose to wire both 2258 ( 18”) components in parallel to one (1) channel of a MA-3600 or MA-5002 for (4) ohms load. In this case each amplifier channel drives one VT4880. If two VT4880 are wired in parallel, the load is two ohms and there will be no amplifier power headroom.
Page 5 NOTES REGARDING LIMITER SETTINGS • The recommended limiter threshold settings pr ovide 3 dB of headroom before the component or bandpass peak voltage is reached. • The component or bandpass peak voltage is 6 dB above the voltage used at continuous maximum power.
Page 6 Amplifier Configurations: 4 x VT4887 & 2 VT4881 / 3 MA- 5002 Amplifier Channel Speakon NL8 Terminals Driving Nominal Impedance at Pins Amplifier Power Rating at Nominal Impedance Power Available to each Bandpass Bandpass Peak Voltage Vac Limiter Threshold dBu Pins 4± 4 x 2407H & 8 x 2104H 4Ω 1800W 900W 54V -3 Ch 1.
Page 7 IM PORT A NT NO TES: All wiring conf igurations shown above use 8-c onductor s peak er cables t erm inated with Neutr ik NL8 "Speakons ". Ensure that each conduc tor in the c able is a m inim um of #13 AW (3-4 m m ). JBL VT4887: The MF & HF section of a VT 4887 has an inter nal passive c ross over network .
Page 8 VT4888 Transducer Complement: Model Speakon NL8 Terminals Per box Nominal Impedance per transducer Nominal Impedance per Passband A ES Power 100 HR Rating per Transducer Peak Power Rating per T.
Page 9 Amplifier Configurations: 6 VT4888 / 4 MA-5002VZ Amplifier Channel Speakon NL8 Terminals Driving Nominal Impedance at Pins Amplifier Power Rating at Nominal Impedance Power Available to each Component Bandpass Peak Voltage Vac Limiter Threshold dBu Pins 4± 6 x 2431H 5.
Page 10 IM PORT A NT NOT ES: All wiring configur ations shown above use 8 -conductor speak er cab les term inated with Neutrik NL8 "Speak ons ". Ensure that each c onductor in the c able is a m inimum of #13 AW Guage (3-4 m m ). JBL VT 4888: The HF section of a VT4888 has two 2431H dr ivers (8 Ω ) wired in Series.
Page 11 VT4889 Transducer Complement: Model Speakon NL8 Terminals Per box Nominal Impedance per Transducer Nominal Impedance per Passband AES Power 100 HR Rating per Transducer Peak Power Rating per Transducer Recommended Power per Passband HF 2435H Pins 4± x 3 5.
Page 12 Amplifier Configurations: 6 VT4889 / 4 MA-5002VZ Amplifier Channel Speakon NL8 Terminals Driving Nominal Impedance at Pins Amplifier Power Rating at Nominal Impedance Power Available to each Component Bandpass Peak Voltage Vac Limiter Threshold dBu Pins 4± 9 x 2435H 5.
Page 13 IM PORT A NT NOT ES: All wir ing c onf igur ati ons s hown above use 8-c onduct or s peaker cabl es t er mi nated wit h Neutr ik NL8 "Speak ons". Ensure t hat eac h conduc tor in t he cabl e is a mi nim um of #13 AW Guage ( 3-4 m m) .
Page 14 VERTEC SYSTEMS SUSPENSION HARDWARE & ASSEMBLY NOTES Arrays of similar V ER T EC Model • Each V ER T EC model uses the matching m odel of Array Frame (VT488X-AF) or Short Frame (VT488X-SF) to create clusters of the same m odel. • These same frames can also be used to ground stack the various systems.
Page 15 VERTEC SYSTEMS SUSPENSION FRAMES & HINGE BARS V ER T EC MODEL FRAME MODELS NOTES HINGE Part # VT4889 VT4889-AF VT4889-SF VT4800-UA VT4800-DA Standard long frame. 16 VT4889 @ 7:1 DF* Standard short frame. 16 VT4889 @ 7:1 DF Universal frame to hang any model to any m odel.
Page 16 VERTEC VT4888, VT4887, VT4881 SYSTEMS: SUSPENSION FRAMES.
Page 17 VERTEC SYSTEMS: SUSPENSION HINGE BARS High-grade steel alloy hinge bars are used to couple adjacent boxes together. There are several different types. To ensure ease and proper inter-connection, make certain that the correct hinge bar model is matched to the appropriate Array Frame or Short Frame as well as the correct V ER T EC model.
Page 18 VT4889 with VT4887 attached using VT4800-DA.
Page 19 TYPICAL 8-BOX HANGING ARRAY The VT4889 full size, the VT4888 mid size, and VT4887 compact line array elements can be suspended from either the “AF” (long) or “SF” (short) array frame. Shown here, eight VT4887 suspended from a VT4887-AF array frame.
Page 20 VERTEC SUPPORT TEAM DIRECTOR, TOUR SOUND David Scheirman Office phone: (818) 895-3458 Pager: (888) 861-1622 Email address: dscheirm@harman.com TOUR SOUND PRODUCT MANAGER Raul Gonzalez Office phone: (818) 830-8749 Mobile phone: (818) 802-9176 Email address: rgonzale@harman.
デバイスJBL VT4881の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JBL VT4881をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJBL VT4881の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JBL VT4881の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JBL VT4881で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JBL VT4881を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJBL VT4881の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JBL VT4881に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJBL VT4881デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。