JVCメーカーLYT1155-001Aの使用説明書/サービス説明書
ページ先へ移動 of 16
Master P age: Right —1— T his document explains the basic information such as sy stem requirements, installation and connections, etc. for the provided software. F or details on the operation, refer to the software inst ruction manual included on the CD-ROM in PDF format.
Master P age: Right —2— Use of this software is authorized according to the terms of the software license. When contacting the nearest JVC office or agency in your country about this so ftware (refer to the JVC W orldwide Service Network at http ://www .
Master P age: Right —3— 䡲 For copying still image files to a PC T he following requirements must be sa tisfied to connect the camcorder to a PC using the USB cable, and to copy still image files from the me mory card in the camcorder .
Master P age: Right —4— 䡲 For holding a video confer ence over the Internet T he following requirements must be satisfied to use a cam corde r as a web camera for video conference o ver the Internet. Hardware Software Wind ow s ® Messenger V er4.
Master P age: Right —5— F ollow the procedure described below to install th e softw are. F rom the [Setup] dialog box in step 3 , you can install the following software. HD Capture Utili ty T his application is used to import MPEG-format video stream from a camcorder , or to export the edited video clip back to the camcorder .
Master P age: Right —6— Repeat the procedure to install ot her software . Note on installing MPEG Edit Studio TM Pro LE Enter the serial number which is prin ted on the label on the CD-ROM case. ● When entering the serial number , consider the case (upper or lower) and diffe rence between number and alphabet.
Master P age: Right —7— Use the USB cable or i.LINK cable to connect the camc order to a PC. ● F or the operation on the camcorder , r efer to the camcorder’ s instruction manuals. USB connection Enables you to cop y still image files in a memory card to a PC or to use the camcorder as a web camera for video conference over the Internet.
Master P age: Right —8— i.LINK connection Enables you to import MPEG-format video stream to the PC (or export edited video clip to the camcorder). 1 Set the camcorder’ s P ow er Switch to “ P ” while pr essing down the Loc k Button located on the switch.
Master P age: Right —9— Installing the driver for importing MPEG-format video stream When you connect the camcorder to the PC with an i.LINK cable at first time, the driver is installed. 1 Click [Install from a list or specific lo cation (Advanced)] and then clic k [Next].
Master P age: Right —1 0— Installing the drivers for using the camcorder as a web camera When you connect the camcorder to the PC with a USB cable at first time, four drivers are installed in succession. NOTE: Click [Continue An ywa y] when the message [Has not passe d Windows Logo testing] appears.
Master P age: Right —1 1— If the [Remov able Disk] window does not appear , confirm the connection ( 墌 pg. 7) or perform the following procedur e. A Click [Start], and then click [My Computer]. T he [Removable Disk] icon w hich represents the me mory card in the camcor der appears in the [My Computer] window .
Master P age: Right —1 2— Still image files that are st ored in a memory card can be copied to a PC and play ed back on the PC. NOTE: Never disconnect the USB cable while the message [ACCESSING FILES] is display ed on the camcorder’ s LCD monitor .
Master P age: Right —1 3— Before replacing memory cards or turning off the PC, first disconnect the USB cable and turn off the camcorder . 1 Confirm that the message [A CCESSING FILES] is not currentl y displa yed on the camcor der’ s LCD monitor .
Master P age: Right —1 4— 1 Connect the camcor der to the PC with an i.LINK cable. ( 墌 pg. 8) 2 Click [Start], go to [All Progr ams] – [PIXELA ] – [HD Captur e Utility], and then click [HD Capture Utility]. ● Y ou can also double-click the [HD Captur e Utility 1.
Master P age: Right —1 5— 7 Check pla yback on the camc order’ s LCD monito r , and then click [Start] appro ximately 2 seconds before the sce ne from wher e importing to be started. 8 Check pla yback on the camcorder’ s LCD monitor , and then click [Cancel] after the scene to be imported finishes.
Master P age: Right —1 6— Reinstalling the driver If the camcorder’ s model name does not appear in HD Capture Utility in spite of proper settings, the driver ma y not be correctly installed. In this case, reinstall the driver . 1 Click [Start], right-click [My Comp uter], and then click [Property].
デバイスJVC LYT1155-001Aの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
JVC LYT1155-001Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはJVC LYT1155-001Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。JVC LYT1155-001Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。JVC LYT1155-001Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
JVC LYT1155-001Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はJVC LYT1155-001Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、JVC LYT1155-001Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちJVC LYT1155-001Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。