La Crosse TechnologyメーカーWT-5442の使用説明書/サービス説明書
ページ先へ移動 of 17
WT-5442 with TX6 Transmitter 433 MHz Radio Controlled Projection Alarm Instruction Manual 1.
TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 2 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Installation 4-5 Program Mode Programming Sequence 5 Function.
FEATURES OF PROJECTION ALARM Operation of these features are in section III. 1. Radio-controlled time and date 2. Projection of time and/or remote temperature 3. EL backlight 4. Six modes of date/se conds/temperature display 5. Indoor temperature 6. Remote outdoor temperature 7.
Note: When using the AC adaptor, plug into the projection alarm first and then into the electrical outlet (thi s will help avoid pressing any buttons inadvertently). 3) Wait 10 minutes for WWVB rec eption and remote temperature. 4) If there is no WWVB reception, manually set the time and date (instructions in the Program Mode).
B. PROJECTION ALARM 1. Remove the battery cover. 2. Observe the correct polarity, and install 3 AA batteries. 3. In addition or instead of inserting batteries, the AC adapter can be used. Simply plug the adapter into the receptacle on the underneath of the alarm clock and then plug the adapter into the outlet.
A. PROGRAMMING SEQUENCE Default (Factory) Setting 1. Time Zone Setting -5 (eastern standard time) 2. Daylight Saving Time ON/OFF ON 3. Adjustable Snooze 10 Minutes 4. Hour Setting 12: AM 5. Minute Setting :00 6. Year Setting 01 (2001) 7. Month Setting 1 (January) 8.
D. DST (DAYLIGHT SAVING TIME) SETTING Note: The DST default is “On”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST “OFF”.
5. Press and release the “ SET” button to confirm the time setting, and to advance to manually set the date. G. DATE SETTING Note: When the WWVB signal is found, that date will over-ride the manually set date.
FEATURES & OPERATIONS III. A. FEATURES 1. Radio-controlled time and date 2. Projection of time and/or remote temperature 3. EL backlight 4. Six modes of date/se conds/temperature display 5. Indoor temperature 6. Remote outdoor temperature 7. Dual alarms 8.
C. PROJECTION OF TIME AND/OR REMOTE TEMPERATURE 1. When plugged into an AC outlet, the projec tion alarm can continuously project the time and/or remote temperature. 2. When operating on batteries alone, the Projection Alarm will only project when a button is pressed.
F. REMOTE TEMPERATURE 1. The projection alarm comes with a remote temperature sensor. When set up properly, the projection alarm will receive and display the remote temperature. 2. It is important to power up the transmitter first, then the Projection Alarm.
2. ACTIVATING/DEACTIVATING THE ALARM a. After entering the alarm-setting m ode, the alarm is activated (either ALM1 or ALM2). b. To toggle between activating and deactivating the alarm, press and release either the ALM1 or ALM2 briefly. “(((1)))” or “(((2)))” will be displayed to the right of the time display when the alarm is activated.
2. WEATHER ICONS There are 3 possible weather icons that w ill be displayed in the FORECAST LCD: Sunny —indicates that the weather is expect ed to improve (not that the weather will be sunny). Sun with Clouds —indicates that the weather is ex pected to be fair (not that the weather will be sunny with clouds).
MAINTENANCE & CARE V. A. Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units. B. Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents—they may mark and damage the displays and casings.
TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Change intensity setting 2) Use AC adapter 3) Darken surroundings 4) Use fresh batteries (if AC is not used) Problem: The LCD is faint. Solution: 1) Replace the batteries. Problem: “OFL” appears in the indoor temperature LCD.
SPECIFICATIONS FOR WT-5442 Temperature: Measuring range: 32 ° F to 122 ° F with 0.2 ° F resolution (indoor) -21.8 ° F to 140 ° F with 0.2 ° F resolution (outdoor) (0 ° C to 50 ° C with 0.1 ° C resolution) Checking intervals: Every 10 seconds indoor, 3 times in 10 minutes for remote temperature.
17 WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this product. Contact La Crosse Technology imm ediately upon discovery of any defects covered by this warranty . Before sending the unit in for repairs, contact La Cro sse Technology.
デバイスLa Crosse Technology WT-5442の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
La Crosse Technology WT-5442をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLa Crosse Technology WT-5442の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。La Crosse Technology WT-5442の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。La Crosse Technology WT-5442で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
La Crosse Technology WT-5442を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLa Crosse Technology WT-5442の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、La Crosse Technology WT-5442に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLa Crosse Technology WT-5442デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
