La Crosse TechnologyメーカーWT-5720の使用説明書/サービス説明書
ページ先へ移動 of 18
WT-5720 Radio Controlled Projection Alarm Instruction Manual 0 2' ( .
2 TABLE OF CONTENTS Topic Page Inventory of Conte nts/ Addi tional Equi pment 3 About WW VB 3 Quick Set-U p Guide 4 Detailed Set-Up Guide Battery Installation 5 Program Mode Programming Sequence 6 Fun.
3 INVENTORY OF CO NTENTS 1) WT-5720 p ro j ect i on alarm 2) AC adapter/transformer 3) Instructi on manual a nd warranty card. ADDITIONAL EQUIPME NT (not included) 1) Two fresh 1.
4 QUICK SET-UP GUIDE 1) Insert two AA batteries into the projection alarm and/or plug into wall. Note: Do not press any bu ttons until the WWVB time signal is received or reception errors may occur. 2) Wait 10 minutes for WWVB reception. 3) If there is no WWVB reception manually s et the time and date (instructions in the Program Mode).
5 DETAILED SET-UP GUIDE I. BATTERY INSTALLATION A. Projection Al arm 1. Remove t he battery cover. 2. Observe the correct polarity, and in stall 2 AA b atteries. 3. In addition or instead of inserting batteries, the A C adapter can be used. Simply plug the adap ter into the receptacle on the underneath of the alarm clock and then plug in adapter.
6 II. PROGRAM MODE To enter the Program Mod e, hold down the “SET” button for 1 second, until the time zone (“-5” default) flashes in the lower right. Th e program mode guide is laid out in a manner that allows yo u to program each func tion separately, or you can fo llo w the instructions e ntirely to pr ogram the pr ojection alarm .
7 5. From –5h to –8h a US map with the highlighted time zone w ill also be displayed to the right of the time display. 6. Press and release the “SET” button to confirm the time zone setting and to advance to DST (Daylight saving time) setting.
8 5. Press and release the “SET” button to confirm the snooze setting and to advance to manually set the time. F. Time Setting Note: When the WWVB signal is found, that time will over-ride the manually set time. 1. Hold dow n the “SET” button for 1 sec o nd .
9 H. 12/24-H our Settin g Note: Setting to the 24-hour mode (also known as Military Time) will also cha nge the temperature to displ ay in ° C instead of ° F. 1. Hold dow n the “SET” button for 1 sec o nd . 2. The selected time zone will flash. 3.
10 FEATURES & OPERATIONS A. Features 1. Radio-co ntrolled ti me and date 2. Projection of time 3. LCD light 4. Six modes of date/seconds/temperature display 5. Indoor temperature 6. Remote temperature 7. Dual alarm s 8. Adjustable snooze B. Radio-Controlled Time and Date 1.
11 C. Projection of Ti me 1. When plugged in to an AC o utlet, the pr ojection alarm can c ontinuou sly project the time. 2. When operating on batteries alone the proj ectio n alarm will only project when a button is pressed. 3. The projection will auto-focus for display from three to six feet away.
12 F. Time Alarm The projection ala rm has two separate alarms for time, “ALM1” and “ALM2”. Th e alarms have a different sound; ALM1 increases in vo lume after 25 seconds, and again after 50 seconds. ALM2 is a con stant volume. The total dura tion is 96 seconds for each alarm.
13 G. Changi ng the Di spl a y M ode (Day , Seconds, and Tem perature) There are six possible displa y modes to view the day, seconds, and tem perature. To change the display (starting at the d efault of day, date, year): 1. Press and release the “MODE/+” butt o n.
14 II. MAINTENANC E & CARE 1. Extrem e temperatures, vibrations, a nd shock sh ould be avoi ded to prevent damage to the units. 2. Clean displays and un its with a soft, damp cloth. Do not us e solvents or sc ouring agents—they may mark and dam age the display s and casings.
15 TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Change inten sity setting 2) Use AC ada pter 3) Darken surroundings 4) Use fresh ba tteries (if AC is not used ) Problem: The LCD is faint. Solution: Replace the batteries. Problem: No reception of WWVB signal.
16 SPECIFICATIONS FOR WT-5 720 Temperature: Measuring range: 32 ° F to 122 ° F with 0.2 ° F resolution (indoor) (0 ° C to 50 ° C with 0.1 ° C reso lution) Checking intervals: Every 10 seconds indoor Power source: AC Adapter (included) Input: 120VAC/60Hz Outpu t: DC 6V/100MA Battery type: Station: 2 x AA, 1.
17 W AR R ANT Y IN F OR M AT I ON La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this produc t.
18 For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: support@lacrossetechnology.com (warranty work) sales@lacrossetechnology.com (information on other products) web: www.
デバイスLa Crosse Technology WT-5720の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
La Crosse Technology WT-5720をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLa Crosse Technology WT-5720の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。La Crosse Technology WT-5720の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。La Crosse Technology WT-5720で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
La Crosse Technology WT-5720を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLa Crosse Technology WT-5720の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、La Crosse Technology WT-5720に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLa Crosse Technology WT-5720デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
