LindyメーカーRS-422/485の使用説明書/サービス説明書
ページ先へ移動 of 23
RS-422/485 PCI Card User Manual English No. 51200 ( 2 Port ) No. 51202 ( 4 Port ) No. 51204 ( 8 Port ) www .lindy .com © LINDY ELECTRONICS LIMITED & LIN DY -ELEKTRONIK GMBH - SEC OND EDITION (No .
.
1.0 Introduction Thank you for purchasing the LINDY RS-422/485 Controller . This PCI serial card enables your computer to support serial RS-422/485 ports with 128Kbyte FIFO, Auto Identify and Switch RS-422/485 and ARSC™ technology .
3.0 Features 1. Fully compliant with PCI S pecification V ersion 2.2 2. Supports both 64 Bit & 32 Bit PCI Bus and 3.3V & 5V connector keys. 3. High speed serial ports suppor t baud rates of up to 921.6Kbp s. 4. Provides a FIFO maximize size of 128Kbytes.
4.0 Specifications 4.1 Function Ty p e LINDY Indus trial Hos t Controller Mode of Operation Differential RS-422 Full-Duplex Bus T ransceivers RS-485 Half-Duplex RS-422 1 Driv er Drivers per Line RS-485 10 Drivers RS-422 10 Receivers Receivers per Line RS-485 32 Receivers 4.
4.4 Driver support Windows3.x/95/98SE/ME/NT/2000/XP/2003 Driver Support DOS, OS/2 , Linux 2.0.x / 2.2.x / 2.4.18 / 2.4.20 4.5 Dimensions 51200 120 × 80mm 51202 160 × 104mm Dimensions (W × D) (St d.Bracket:121mm) 51204 180 × 108mm 4.6 Regulatory Approvals Hardware CE, FCC Regulatory Approv als Sof t w are WHQL 4.
6.0 Pin Assignments & Cable Wiring The pin assignments of the DB9 and DB25 Male port are stated as below: Type Signal DB9M DB25M TxD- 1 8 TxD+ 2 3 RxD+ 3 2 RxD- 4 20 RTS- 6 6 RTS+ 7 4 CTS+ 8 5.
LINDY Serial Communication Boards hav e one DB37 female port for the 4 port version and one DB78 female port for t he 8 port version. The pin assignments of the DB37 female port and the DB78 female port are shown below and on the following page.
LINDY DB78 female 8 Port Serial Communication Boards Pin Assignment Port Signal 1 2 3 4 5 6 7 8 TxD- 21 6 30 15 60 45 69 54 TxD+ 1 25 10 34 40 64 49 73 RxD+ 2 26 11 35 41 65 50 74 RxD- 22 7 31 16 61 4.
LINDY Serial Communication Boards feat ure a 1 x DB37 Male to 4 DB9 Male cable for the 4 port version, and a 1 x DB78 Male port to 8 x DB9 Male ports cable, for 8 port version.
6.1 Jumper Settings These cards feature built-in termination re sistors for each serial port. Y ou can modify the jumper settings (short the pins) to avoid impedance mismatch problems when operating under multi-drop transmission.
7.0 Driver Installation 7.1 Windows 2000 / XP / 2003: On booting up, the system will detect the presence of the PCI Serial card and prompt for the driver installation wi zard. Please ignore this for known and insert the driver CD in your CD/DV D ROM drive.
(2) Y ou can select the folder location in which the driver is installed. Click Next ” to continue. (3)The Software Inst allation Notice will appear , please click “ Continue Anyway ”, and the system will install the driver automatically . (4) Please click “ Finish ” and eject the driver CD.
(5) Please go back to the “Found New Hardware Wizard” window . Select “ Inst all the sof tware automaticall y (Recommend) ” and click “ Next ”.
(9) T o uninstall the driver: Please click S tart > Control Panel > Add or Remove P r o g r a m s C l i c k “ Change/Remove ” to uninstall the I/O driver . 7.2 Windows 2000 / XP / 2003 on a 64-bit system: On booting up, Windows 2000 / XP / 2003 will detect the presence of the PCI Serial card and will prompt for driver installation.
7.5 Dos: Please install the driv er from the CD ROM: PCI IODOSinst all.exe , and follow the installation step s from the CD ROM: PCI IOserial.p df 7.6 Windows 95 / 98SE / ME: On booting up, Windows 95 / 98SE / ME will detect the presence of the PCI Serial card and will prompt for driver installation.
(2) Select “Search for the best driv er for your device (Recommended)” and click “Next” to continue. (3) Please select “ Specify a location ” and point to the CD Dr iver directory to install the driver .
(4) The system will search and inst all t he appropriate IO driver automatically . Please click “ Next ” to continue. (5) Please click “ Finish ” to complete this installation step. Note: The “Add New Hardware Wizard” window s will display and install drivers several times until you finish setting up each serial port.
When Windows has finished installing the driver you must check: Control Panel > System > Hardware > Device Manager >Port s[COM&LPT] It will show the additional ports: Note: 1. If you have installed PCI Serial port s in your system, you will be requested to restart your computer , when you have finished setting up each serial port.
8.0 Configure COM port (1) Select the PCI Serial Port which you want to configure, for example COM3 . Right click the mouse, and select “Properties” . (2) Click “ Port Settings ”. Configure the Bits per second, Dat a bits , Parity , S top bits and Flow control if you want to change them.
Click the “ Advanced ” button to set more advanced features. (3) Configure the “Enable Auto CTS/RTS Flow Control ”,“ 16/32 bytes FIFO length and Receive/T r ansmit Buffer trigger l evel if you want to change these settings (The 128K software FIFO adjustment only support s Microsof t Windows 2000 / XP / 2003 OS.
- 20 -.
This device complies with Part 15 of the FCC Rules. Operation is subject to the followi ng two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations.
デバイスLindy RS-422/485の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Lindy RS-422/485をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはLindy RS-422/485の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Lindy RS-422/485の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Lindy RS-422/485で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Lindy RS-422/485を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はLindy RS-422/485の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Lindy RS-422/485に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちLindy RS-422/485デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
