Manhattan Computer ProductsメーカーST100の使用説明書/サービス説明書
ページ先へ移動 of 15
Digita l Satellite Receiver PLAZA MODELS ST 100 / ST 120 ST 200 / ST 300 PLAZA MODELS ST 100 / ST 120 ST 200 / ST 300 Instruction Manual (English) http://www.
2 INTRODUCTION ..................................................................................................................................... 2 FEATURES ...........................................................................................
3 FEATURES €• 1 LNB input, IF signal loop through, supports Universal, Single, C Band and Wide Band LNB €‚ Multiple LNB switching 0/12V, 14/18 volts, 22KHz and DiSEqC 1.2 €ƒ 2 SCART, TV (CVBS / RGB) and VCR/DVD with loop through facility €„ S- Video output on mini DIN.
4 CONNECTORS AND DEFINITIONS Please do not connect the power to the receiver until all other connections have been made and checked. R1: AC IN (Power Cord) Connect this lead to the mains outlet (100 - 240 V AC 50/60 Hz) R2: LNB IN (IF Input) Connect the IF cable from your LNB to this connector .
5 F13: IRDETO CARD SLOT (For Models with embedded Irdeto) Insert your smart card into this slot. We recommend that you familiarize yourself with the remote control handset prior to installing the receiver. INS TALLATION For digital quality picture, connect the receiver to your TV using a fully wired SCART lead.
6 The receiver will automatically switch on and off at the stored times for each event. After the time has lapsed, it will reset that event to Off . On Time / Off Time: Using 0- 9 keys enter the time.
7 EXAMPLE: To configure four LNB Astra 2 (28.2E), select LNB No 1 and set DiSEqC to 1 Astra 1 (19.2E), select LNB No 2 and set DiSEqC to 2 Hotbird 1- 6 (13E), select LNB No 3 and set DiSEqC to 3 Thor .
8 Search Mode: Select search option for each satellite. See below for options. Options with + D will also in clude data channels €“ Auto All - All TP, Video and Radio channels. €” Auto All + D - All TP, Video, Radio and Data channels. €• Auto FTA - All TP for Free To Air Video and Radio channels.
9 Set Multisat Sear ch 2, LNB No 2 and select horizontal TP from low band. Adjust skew ( externally ) to - value for maximum signal and quality. Set Multisat Search 3, LNB No 3 and select vertical TP from high band. Adjust skew ( externally ) to + value for maximum signal and qua lity.
10 SATELLITE LIST Press SAT key and the combined channel and satellite list will appear. Select a channel from this list and exit. SELECTING RADIO CHANNELS P ress TV / RADIO key once and it will change to Radio mode. Press it again to change back to TV mode.
11 This menu is pre - configured and ready to upgrade. Select Start and press OK. If you have a motorized antenna, it will automatically move to Hot Bird 1- 6 (13.
12 ELECTRONIC PROGRAM GUIDE (EPG) INSTALLING FAVORITE CHANNELS There are 11 TV and 11 Radio channel lists you can create. You can rena me the headings to your requirement. Go to INSTALL menu and select Favorite Channels. Follow below steps. To delete a favorite channel Select Delete and press OK, the cursor will move to channel list on the right.
13 group and this will highlight these in red. When finished, press EXIT. Then store the settings. TO RENAME CHANNEL Select Rename and press OK. Select channel and press OK, a keypad will appear. Select char acter and press OK. After naming press EXIT.
14 4. When finis hed the slave receiver will reboot and come up with a channel. TROUBLE SHOOTING GUIDE If you suspect there is a problem with your receiver, please check the following trouble shooting guide before calling a Manhattan authorised service agent.
15 RF MODULATOR Frequenc y 470MHz to 860 MHz Channel Range UHF CH21 to 69 TV standard PAL BG/ I /K PAL M, NTSC M POWER SUPPLY Input Voltage 100 -- 240 V AC, 50/60Hz ~ Type SMPS Power Consumption Max 3.
デバイスManhattan Computer Products ST100の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Manhattan Computer Products ST100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはManhattan Computer Products ST100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Manhattan Computer Products ST100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Manhattan Computer Products ST100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Manhattan Computer Products ST100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はManhattan Computer Products ST100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Manhattan Computer Products ST100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちManhattan Computer Products ST100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。