Marshall electronicメーカーQV171-HDSDIの使用説明書/サービス説明書
ページ先へ移動 of 28
Marshall Electronics QV171-HDS DI 17" Full Resolution Quad -Viewer Monitor Operating Instructions.
2.
3 Contents Product Overview ....................................................... ........................................................................................ 5 Features ...................................................................
4.
5 Product Overview The QUAD VIEW ER Series is the latest addition to Marshall's line of IMD -equipped monitors. T he monitor features a full resolution 1920 x 1200 LCD panel, built -in high quality HD Quad Splitter, f our independent HDSDI inputs, one DVI -I input, IMD (In-Monit or Display) capability, Audio Presence indicator, and Time Code.
6 Installation and I nitial Setup ■ Unpacking Carefully unpack the QV171-H DSDI monitor and ver ify that the following it ems are included: • QV171-HDSDI Monitor • V-PS12-5V-1 Power Supp ly with 2-Pin T wist Lock Connector • Operating I nstructions Inspect t he unit f or any phys ical dama ge t hat may hav e oc curred during shipping.
7 Top and Front Panel Features Power Button Turn the monitor off or on by pressing the power button. In the ON state, the LED on the power button will illuminate green. Input Channel Buttons Pressing Ch.1 , Ch.2 , Ch.3 , or Ch.4 will select HDSDI-SDI Video Inputs 1, 2, 3 or 4.
8 Rear Panel Features RS-422/485 Serial Inter face The RS-422/48 5 port s are used t o remotely contr ol the IMD or all QV171-HDS DI f eatures, using a variety of industr y standard protocols. ( Note: Connector/pin-o ut may need t o be adapted depending on pr otocol and controll ing device used.
9 Compatible Input Formats The following SDI stan dards are supported b y the Q V171-HDSDI: 525i, 625i 1035i/60, 1035i/59.94 1080i/60, 1080i/59.94, 1080i/50 1080psF/24, 1080psF/23.
10 Quad Mode a nd Layouts (Co ntinued) IMD Text IMD Text IMD Text IMD Text 00:00:00:00 Ch.1 Ch.2 Ch.3 Ch.4 IMD Text 00:00:00:00 Ch.1 IMD Text Ch.2 IMD Text Ch.
11 On-Screen Menu STRUC TURE OVERVIE W Back Return to Main Menu Monochrome Link All Off, On Blue Only Link All Off, On Pixel to Pixel Link All Off, On Aspect Ratio Link All Full, 4:3, Scaled 4:3, 16:9.
12 On-Screen Menu (conti nued) M A IN MENU A ND N A VIG A TION Access and navigate the main menu using the RotoMenu ™ k nob: Using the Rot oMenu knob • Press the RotoMenu ™ knob to enter t he main menu. • Rotate the knob to scroll up or down in the main m enu or each submenu.
13 On-Screen Menu (conti nued) VIDEO CONFIGU RA T ION SUBMENU (contin ued) ■ Monochrome Mode Use this sett ing to enabl e monochrome mode. Onl y the luminance of the image will be displayed as a grayscale picture. ■ Blue-Only M ode Use this setting to enable Blue-On ly mode.
14 On-Screen Menu (conti nued) VIDEO CONFIGU RA T ION SUBMENU (contin ued) ■ Aspect Ratio Settings Use t his menu option to s witch between sev eral aspect r atio settings .
15 On-Screen Menu (conti nued) VIDEO CONFIGU RA T ION SUBMENU (contin ued) ■ Curtain Color Use this setting to choose the default c olor displayed on the screen when no video input is present. Available colors are blue , red , green , white , and bl ack .
16 On-Screen Menu (conti nued) SYSTEM CONFIG UR A TION SUBMENU Use the System Configuration s ubmenu to control various system parameters . ■ User-Definable Functio n Buttons Use t he Function 1 and Function 2 menu items to define each func tion button on the f ront panel of t he monitor.
17 On-Screen Menu (conti nued) SYSTEM CONFIG UR A TION SUBMENU (continued) ■ Saving an d Loading User Presets Use the SAVE CONFIG and LOAD CO NFIG menus to save current s ettings to one of 6 presets, or load a preset. Each Preset saves all monitor settings except for IMD configuration.
18 On-Screen Menu (conti nued) OSD CONFIGURAT ION SUBMENU (contin u ed) ■ Status Display Use this sett ing to enabl e or disable status display. W hen ena b led, the current v ideo input standard is displayed on the top left of the screen.
19 On-Screen Menu (conti nued) OSD CONFIGURAT I ON SUBMENU ( continued) ■ OSD Ta ll y Use this setting to choose how tally is displayed on the screen. The available OSD Tally options depend o n the Tally Source selected in the IMD Configuration s ubmenu ( se e page 22 ).
20 On-Screen Menu (conti nued) OSD CONFIGURAT ION SUBMENU (contin u ed) ■ A u dio Mo nitor Use the Audio Monitor menu option t o enable or disable the audio presence indicat or icon. W hen enabled, this icon indicates whether embe dded audio is present in the SDI video input.
21 On-Screen Menu (conti nued) IMD CONFIGUR A TION SUBMENU ■ Overview The QV171-HDSDI f eatures an In-Monitor Dis play (IMD) with the ability to display on -screen text and t ally i n t hree colors. IMD t ext, color, and al i gnment c an be assigned to each screen locally using menu options (se e below).
22 On-Screen Menu (conti nued) IMD CONFIGURAT I ON SUBMENU ( continued) ■ IMD Pr otocol Use the IMD Protocol menu option t o choose the protocol with which the Q V171-HDSDI rec eives remote commands. Currently, f our protocols are available. Contact Mars hall Electronics for the latest protocol compatibilit y.
23 On-Screen Menu (conti nued) IMD CONFIGURAT I ON SUBMENU ( continued) TSL/MEI 422 Use the TSL/MEI 422 setting to control OSD t ally via the TSL or Marshall serial protocols. ■ IMD Baud Rate Use this sett ing to choose the baud rate. The baud rate must be set in conjunction with the controlling device.
24 On-Screen Menu (conti nued) IMD FI XED SUBMENU ■ IMD Fixed Color Use this sett ing to choose the color of the IMD Fixed St ring text (see below). Available colors are red , green , and yellow . T his setting does not affect text color when using IMD text via the Image Video or TSL v4.
25 On-Screen Menu (conti nued) SERVICE SUBME NU ■ Software Version Display The Main Board, Keypad, and CPLD sof tware version numbers are dis played.
26 Specifications ■ P A N EL Screen Size 17” Diagonal Display Area (h x v) 367.20 x 229. 50 mm Aspect Ratio 16:10 Native (4:3/16:9 Modes) Pixels 1920 x RGB x 12 00 Color Depth 18-bit Viewing Angle (h x v) 140 ° x 120° Brightness 400 cd/m 2 Contrast Ratio 600:1 Dot Pitch (h x v) 0.
27 Specificatio ns (continued) Maintenance ■ Screen Cleaning Periodically clean the sc reen surface using ammonia-f ree cleaning wipes (Marshal l Part No. V-HW P-K ). A clean micro- fiber cloth can also be used using only non -abrasive and ammonia -free cleaning agent s.
28 Marshall Electronics , Inc. 1910 E as t Maple Ave. El Segundo, CA 9024 5 Tel: (800) 800-6608 / ( 310) 333-0606 • Fax : 31 0-333-0688 www. LCDRac ks.
デバイスMarshall electronic QV171-HDSDIの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Marshall electronic QV171-HDSDIをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMarshall electronic QV171-HDSDIの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Marshall electronic QV171-HDSDIの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Marshall electronic QV171-HDSDIで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Marshall electronic QV171-HDSDIを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMarshall electronic QV171-HDSDIの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Marshall electronic QV171-HDSDIに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMarshall electronic QV171-HDSDIデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。