Marshall electronicメーカーV-R261-DLWの使用説明書/サービス説明書
ページ先へ移動 of 36
Marshall Electronics Model No. V-R261-DLW 26" Full Resolution Dual Link / Waveform Monitor Operating Instructions.
2 This page intent ionally lef t blank.
3 Contents Features ............................................................................................................................................................ 4 Installation and Initial Setup .........................................
4 Features The V-R261-D L W (Dual Link / W aveform) m onitor is the latest a ddition to Mars hall's expand ing line of IMD-equip ped monitors. ■ 1920 x 1200 F ull Resoluti on 26” Pan el The V-R261-D LW features an all-dig ital TFT - MegaPixel acti ve matrix LC D s y stem with 1920x 1200 native resoluti on.
5 Installation and Initial Setup ■ Unpacking Carefully unpack the V-R 261-DLW m onitor and verif y that the follo wing items are includ ed: • V-R261-DLW Moni tor • V-PS24-7.5 Power Suppl y with XLR Co nnector • Operating Instruc tions Inspect the unit f or an y physical dam age that m ay have occurr ed during shippi ng.
6 Front Panel Features Power Butt on Turn the m onitor off or on b y pressing the p ower button. The L ED on the p ower button is at maximum illumination whe n the unit is OFF. The LED is at m inimum illumination when the u nit is on . Input Channel But tons Pressing SDI 1 or SDI 2 will selec t HDSDI-SD I Video Inputs 1 or 2, respecti vely.
7 Rear Panel Features RS-422/485 Seri al Interface The RS-422/48 5 ports are used to rem otely control the IMD or al l V-R261-D L W f eatures, using a v ariety of industry stand ard pr otocols. (Note: Connector/pin-ou t may need t o be adapt ed depending on protocol an d controlling device used.
8 Compatible Input Formats The fo llowing SDI standard s are supported b y the V -R261-DLW: 525i, 625i 1035i (60 / 59.94) 1080i (60 / 59.94 / 50 ) 1080psF (24 / 23.98) 1080p (23.98 / 24 / 25 / 29.97 / 30) 720p (60 / 59.94 / 50) 720p (23.98 / 24 / 25 / 29.
9 DLW Monitor Layouts The V-R261-DLW has 4 p ossible layouts, M ulti mode, Vecto rscope mode, Wav eform mode and Full Screen Vid eo mode. Each pr ess of the L AYOUT Butto n will change the cur rent mode t o next av ailable mode.
10 Waveform Mon itor Mode Full Screen V ideo Mode.
11 On-Screen Menu STRUCT URE OVERVIEW.
12 On-Screen Men u (continued) MAIN MENU A ND NA VIG A TION Access and n avigate the m ain menu us ing the Ro toMenu ™ k nob: Using the Roto Menu k nob • Press the RotoM enu ™ k nob to enter the m ain menu. • Rotate the k nob to scroll u p or do wn in the m ain m enu or each subm enu.
13 ■ 16:9 Markers Use this settin g to super impose one of 10 m arkers on the screen when i n 16:9 or Full Scree n mode. T his se tting is disabled when th e aspect r atio is set to 4: 3, or whe n Pixel-to- Pixel m ode is enabled.
14 4:3 Marker Examples: ■ Marker Background Use this settin g to choose how se lected m arkers are displa yed on the sc reen: • Off The mark er is superim posed on the com plete im age. • 50% Gray Screen area beyond the mark er is show n at 50% intensity.
15 Video Config Sub menu Use the Vide o Configuratio n subm enu to select variou s video set tings suc h as monochrom e m ode or blue-o nly mode. ■ Monochrome Mode Use this settin g to enable m onochrome m ode. Only the lum inance of the im age will be d isplayed as a gra yscale picture.
16 ■ Pixel-to-Pixel Mode Use this settin g to enable Pixel- to-Pixel m ode. This m ode bypasses the m onitor’s intern al scaling f unction and displa ys images i n their native reso lution an d as.
17 ■ Curtain Color Use this setting to choose the default color displayed on the screen when no video input is present. Availab le colors are blue , red , green , w hite , and blac k .
18 ■ HDMI CSC A uto (HDMI input only, via the DVI-I interface) The HDMI C SC Auto settin g is used to acc omm odate newer HDMI int erfaces that send co lorspace signa ling in the HDMI data stream . If this setting is set to On , the m onitor will autom atically determ ine which co lorspace setti ng to use.
19 ■ User-Definable Function Buttons Use the Function 1 , Fu nction 2 , Fun ction 3 and Functio n 4 menu item s to defin e each function button on the f ront panel of the m onitor.
20 OSD Config Subm enu Use the OSD C onfiguration subm enu to select a variet y of inform ation to be disp layed on the s creen. ■ IMD State Use this settin g to turn the I MD text displa y on or off . This setting af fects both fixed string IMD te xt and rem ote IMD tex t commands.
21 ■ OSD Tally Use this settin g to choose how tal ly is displa yed on the sc reen. The ava ilable OSD T ally options d epend o n the T ally Source selecte d in the IMD Conf iguration subm enu W hen.
22 ■ A nc. Timec ode Use this settin g to enable t im e code display on t he screen. Tim e code is d e-em bedded fr om the vertical anci llary data (VANC) within the HD/ SDI signal. T wo types of tim e code can be selected t o disp lay on the s creen: LT C (linear tim e code) or VITC (v ertical interval time code) .
23 IMD Config Submenu ■ Overview The V-R261-DLW features an In- Monitor Displa y (IMD) with the abilit y to display o n-scr een text and t ally in th ree colors. IMD text, c olor, and alignm ent can be assig ned to each sc reen locall y using m enu options (see be low).
24 . TSL v4.0 Use the TSL v4.0 protoc ol s etting when con trolling the IMD fr om a T SL tally controller, or other c ontrolling device which utilizes the TSL v4.0 protocol. The IM D # m ust be set f or each scr een in conjunctio n with the con trolling device.
25 ■ IMD Baud Rate Use this settin g to choose the b aud rate. T he baud rat e mus t be set in conjuncti on with th e controlling d evice. Availab le baud rates are 300 , 600 , 1 200 , 2400 , 4800 , 96 00 , 19200 , 3840 0 , 57600 , 1 15200 . The T SL v4.
26 ■ IMD Fixed Align Use this settin g to choose the h orizontal alignm ent of t he IMD text. IMD tex t can b e justified on t he lef t , center or right of the screen. This setting is overridden when using IMD text via the Image Video protocol (alignm ent is set via Image Video protocol).
27 ■ 608 Color The EIA-608 caption pr otocol can define the color f or the closed ca ption text. Use t his setting to choose between using the color d efined by the da ta stream or to ov erride this data w ith any of the selected colors. The default setting f or option is Auto.
28 • YUV Overla y The YUV com ponents of the sign al are over laid. • RGB Para de The R (s hown in Red), G ( shown in Gre en) and B ( shown in B lue) com ponents of the si gnal are displayed from left to right. • RGB Overl ay The RGB com ponents of the signal are o verlaid.
29 ■ Colorize Waveform Use the Colorize Waveform option to add or remove color from the W aveform display. W hen Colorize W aveform is ON, the YUV and RGB data components on the W aveform display will appear in different colors. W hen Colori ze W aveform is OFF , al l Y UV and RG B data com ponents will appear as w hite on the W aveform display.
30 ■ DID/SDID Use this sect ion to select which p acket IDs should be c ounted on th e DLW m onitor displa y. For exam ple, 0x6060 would count th e Tim ecode data pack ets, 0x6101 wou ld count the EIA- 708 CC data pack ets and 0x6102 w ould count the EIA-608 C C data pack ets.
31 SERVICE SUB MENU ■ Software Version Display The Main Board, Keypad, and FPGA softwar e version numbers are displayed. . The following inform ation is disp layed: • rel: Release Pack age version.
32 Specifications ■ PANEL Screen Size 25.54” Diagonal Display Area (h x v) 528 mm x 375.6 mm Aspect Ratio 16:10 Native (4:3/16:9 Modes) Pixels 1920 x RGB x 1200 Color Depth 8-bit Viewing An gle (h x v) 178° x 17 8° Brightness 400 cd/m 2 Contrast Ratio 1000:1 Pixel Pitch (h x v) 0.
33 Dimensions.
34 Maintenance ■ Screen Cleaning Periodicall y clean the scr een surface using amm onia-f ree cleaning wipes (Marsha ll Part No. V-HWP-K ) . A cl ean m icro- fiber cloth can a lso be use d using on ly non-abras ive and am m onia-free cleaning a gents.
35 This page intent ionally lef t blank.
36 Marshall Electronics , Inc. 1910 East Maple Ave. El Segundo, CA 90245 Tel: (800) 800-6608 / ( 310) 333-0606 • Fa x: 310-333- 0688 www.LC DRacks.com • sales@l cdracks.
デバイスMarshall electronic V-R261-DLWの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Marshall electronic V-R261-DLWをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMarshall electronic V-R261-DLWの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Marshall electronic V-R261-DLWの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Marshall electronic V-R261-DLWで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Marshall electronic V-R261-DLWを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMarshall electronic V-R261-DLWの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Marshall electronic V-R261-DLWに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMarshall electronic V-R261-DLWデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。