MemorexメーカーMMG-CR3810の使用説明書/サービス説明書
ページ先へ移動 of 21
MODEL: MMG-CR3810 BEFORE OPERA TING THIS PRODUCT , PLEASE READ THESE INSTRUCTIONS COMPLETEL Y . UNDERCABINET CD CLOCK RADIO OPERA TING INSTRUCTIONS MMG-CR3810.
1 SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit.
10. POWER SOURCES This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
5 LOCA TION OF CONTROLS 2 1 4 5 9 10 12 11 3 6 13 14 15 16 17 18 19 7 8 1. AC Cord (Rear of Unit) 2. Remote Sensor 3. Mounting Screw Holes (Top of Unit) 4. RADIO/BAND Button 5. CD Button 6. CD Compartment Door 7. Display 8. TIMER Button 9. PLAY/PAUSE ( ) Button 10.
6 LOCA TION OF CONTROLS (CONTINUED) BATTERY INSTALLATION The remote control transmitter is designed to operate with two (2) “AAA” size batteries (not included).
This under the cabinet CD clock radio has been designed to be installed underneath a wooden cabinet by using the Mounting Template, four (4) Screws, four (4) Washers and four (4) Spacers (see Figure 1).
3b. IF YOUR CABINET HAS AN OVERHANG: Measure the thickness of the overhang (see Figure 3). Fold the front of the template down along the printed guideline that is closest to the thickness of your cabinet. Tape the folded portion to the backside of the overhang, then tape the template underneath the cabinet (see Figure 4).
7. Insert screws from the INSIDE of the cabinet. The washers must be used on metal cabinets and wood cabinets if the drilled holes were not countersunk. Position the washers, flat- side down, and insert the screws into the holes. 8. If your cabinet does not have an overhang, skip this step.
10 OPERA TION TO SET OR RESET THE ACTUAL TIME Press and hold the TIMER button ❶ ; the display will show “00:00” and the hour digits will blink. Use the SKIP/TUNING / buttons ❷ to select the amount of hours in the countdown. 2 2 1 1 Press the TIMER button ❶ again and the minute digits will blink.
11 OPERA TION (CONTINUED) TO START THE COUNTDOWN TIMER Once the countdown time has been entered (see previous page), press the TIMER button and the display will start counting down the preset countdown time. 1 When the countdown timer reaches “00:00:oo”, the unit will beep.
12 OPERA TION (CONTINUED) Press the POWER button ❶ to turn the unit on. Press the RADIO/BAND button once ❷ to select radio. Repeatedly press to select the desired band (AM, FM).
13 OPERA TION (CONTINUED) Open the CD compartment door by pressing the OPEN/CLOSE button. Insert a disc, label side up, onto the spindle and close the CD compartment door.
14 OPERA TION (CONTINUED) Insert a CD as described on the previous page. Press the POWER button ❶ to turn the unit on and press the CD button ❷ . The total playing time and number of tracks will appear in the display. 2 1 1 Press the PLAY/PAUSE ( ) button to start playback; the Play indicator will appear.
When a CD is playing, simply press the Number buttons ❶ to directly select a track. For tracks over 9, press the OVER button ❷ , followed by the Number buttons ❶ (i.
16 OPERA TION (CONTINUED) Press the POWER button ❶ to turn the unit on and press the CD button ❷ . Press the MEMORY DOWN/RANDOM button ❸ ; “RANDOM” will appear in the display. 3 2 1 1 Press the PLAY/PAUSE ( ) button ❶ to begin playback. The unit will play all the tracks in random order.
17 OPERA TION (CONTINUED) Press the PLAY/PAUSE ( ) button to begin playback. The unit will play all the tracks in the order you programmed them. 3 Adjust the volume using the VOLUME +/– buttons ❶ as desired. When the disc is through playing, it will stop.
18 CARE AND MAINTENANCE Caring for Compact Discs • Treat the disc carefully. Handle the compact disc only by its edges. Never allow your fi ngers to come in contact with the shiny, unprinted side of the disc. • Do not attach adhesive tape, stickers, etc.
19 TROUBLESHOOTING GUIDE SYMPTOM CAUSE SOLUTION Unit will not AC cord not Check AC cord turn on. connected. connection. Disc will not play. CD compartment Close CD compartment not closed. door. Disc inserted Reinsert disc correctly. incorrectly. Dirty or defective disc.
Memcorp, Inc. Weston, Fl Printed in Hong Kong Visit our website at www .memcorpinc.com MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 20.
デバイスMemorex MMG-CR3810の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Memorex MMG-CR3810をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMemorex MMG-CR3810の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Memorex MMG-CR3810の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Memorex MMG-CR3810で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Memorex MMG-CR3810を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMemorex MMG-CR3810の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Memorex MMG-CR3810に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMemorex MMG-CR3810デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
