Metra Electronicsメーカー95-3302の使用説明書/サービス説明書
ページ先へ移動 of 20
INST ALLA TION INSTRUCTIONS FOR PART 95-3302 95-3302 APPLICA TIONS GM MUL TI KIT ( see models list inside ) KIT FEA TURES • Double DIN Mount Radio Provision • Stacked ISO Mount Radio Provision •.
Dash Disassembly Chevrolet - Cobalt 2005-2010 . . . . . . . . . . . . . . . .1 - Equinox 2005-2006 . . . . . . . . . . . . . 2 - HHR 2006-2010. . . . . . .. . . . . . . . . . . . 3 - Malibu 2004-2007 . . . . . . . . . . .... . 4,5 - Malibu 2008-2010 .
95-3302 DASH DISASSEMBL Y Chevrolet Cobalt 2005-2010/Pontiac G5 2007-09 D isconnect the negative battery ter- minal to prevent an accidental short circuit. 1 Unclip and remove trim panel from above glove box. (Figur e A) 2 Unclip upper edge of panel below steering column and let hang.
2 95-3302 DASH DISASSEMBL Y Chevrolet Equinox 2005-2006 Pontiac T orrent 2006 D isconnect the negative battery ter- minal to prevent an accidental short circuit. 1 Unsnap panel below power window switch and remove . Note: This allows you to unplug the window switch easier .
3 95-3302 DASH DISASSEMBL Y Chevrolet HHR 2006-2010 D isconnect the negative battery ter- minal to prevent an accidental short circuit. 1 Unclip and remove entire panel sur- rounding radio and a/c controls including the a/c vents. (Figure A) 2 Remove (8) 9/32” screws securing radio and a/c control to remove radio.
4 95-3302 DASH DISASSEMBL Y Chevrolet Malibu 2004-2007 D isconnect the negative battery ter- minal to prevent an accidental short circuit. 1 Unclip and remove wood grain/paint- ed trim pieces from both sides of steering wheel. (Figure A) 2 Unclip and remove side panel from driver’ s side of dash with door open and remove (2) 7 MM screws.
5 95-3302 DASH DISASSEMBL Y Chevrolet Malibu 2004-2007 Remove (2) 7 MM screws from bot- tom of glove box then open box and squeeze sides together to open fur- ther and remove the remaining (4) 7MM screws. Unclip the black vent cover under the glove box then unclip and remove entire glove box assem- bly .
6 95-3302 DASH DISASSEMBL Y Chevrolet Malibu 2008-2010 Remove (2) 8 mm screws from bottom of radio/climate panel. 3 Remove (6) 8 mm screws from radio and climate controls. 5 Unsnap and r emo ve the climate/radio panel and upper vent trim panel together .
7 95-3302 DASH DISASSEMBL Y Pontiac G6 2005-2009 D isconnect the negative battery ter- minal to prevent an accidental short circuit. 1 Open glove box and remove (6) screws from outer edge then unclip and remove box. (Figur e A) 2 Remove (4) screws from panel below steering column.
8 95-3302 DASH DISASSEMBL Y Pontiac Solstice 2006-2009 D isconnect the negative battery ter- minal to prevent an accidental short circuit. 1 A. Lift up the lower edge of the instrument panel cluster trim plate enough to reach underneath and release the shift boot trim ring retaining tabs.
9 95-3302 DASH DISASSEMBL Y Saturn Aura 2007-2009 D isconnect the negative battery ter- minal to prevent an accidental short circuit. 1 Unclip and remove shifter trim ring . (Figure A) Unclip and remo ve the center con- sole trim panel, then remove (2) screws from bottom edge of dash trim panel.
10 95-3302 DASH DISASSEMBL Y Saturn Ion 2006-2007 D isconnect the negative battery ter- minal to prevent an accidental short circuit. 1 Unclip radio trim panel. (Figure A) Unplug connectors from trim panel and remove panel. (Figur e B) 2 Remove (4) screws securing the radio.
11 95-3302 DASH DISASSEMBL Y Saturn Sky 2006-2009 D isconnect the negative battery ter- minal to prevent an accidental short circuit. 1 Unclip and remove side panel from driver’ s side of dash with door open and remove (2) 7 MM screws.
12 95-3302 DASH DISASSEMBL Y Saturn Vue 2006-2007 D isconnect the negative battery ter- minal to prevent an accidental short circuit. 1 Grasp the front edge of the shifter trim panel and pull outward and upward.
95-3302 KIT ASSEMBL Y A B C DOUBLE DIN MOUNT RADIO PROVISION Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the br acket. (Figure A) 1 Slide the DDIN radio unit into the trim plate br acket assembly and secure the unit to the kit using the screws supplied with the head unit.
95-3302 KIT ASSEMBL Y 14 ST ACKED ISO MOUNT RADIO PROVISION Slide the appropriate bracket into the trim plate aligning the holes in the trim plate to the clips on the bracket. (Figure A) 1 Slide the stacked ISO DIN units into the trim plate br acket assembly and secure the units to the kit using the screws supplied with the head units.
95-3302 FINAL ASSEMBL Y FINAL ASSEMBL Y (A) Strip wire ends back 1/2" B) T wist ends together C) Solder D) T ape A B C D Locate the factory wiring har ness in the dash. Metra recommends using the proper mating adapter and making connections as shown.
95-3302 NOTES 16.
95-3302 NOTES 17.
95-3302 INSTRUCTIONS 1-800-221-0932 REV . 05/03/10 © COPYRIGHT 2001-2010 METRA ELECTRONICS CORPORA TION INST95-3302 www .metraonline.com.
デバイスMetra Electronics 95-3302の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Metra Electronics 95-3302をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMetra Electronics 95-3302の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Metra Electronics 95-3302の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Metra Electronics 95-3302で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Metra Electronics 95-3302を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMetra Electronics 95-3302の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Metra Electronics 95-3302に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMetra Electronics 95-3302デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
