Metrologic InstrumentsメーカーMS863の使用説明書/サービス説明書
ページ先へ移動 of 52
METROLOGIC INSTRUMENTS, INC. MS860 / MS863 Mini-Slot Laser Bar Code Scanner Installation and User’s Guide.
.
ii L OCATIONS Corporate Headquarters North America Metrologic Instruments, Inc. Customer Service: 1- 800-ID-METRO 90 Coles Road Tel: 856-228-8100 Blackwood, NJ 08012-4683 Fax: 856-228-6673 Email: info@ metrologic.
iii T ABLE OF C ONTENTS Introducti on........................................................................................................... 1 Scanner and Acce ssories ...............................................................................
1 I NTRODUCTION Metrologic's MS860 and MS863 laser bar code Scanners are high-speed, aggressive in-counter scanners. Both models have compact, durable housings for use with applications w here counter top space is limited. The MS860 and MS863 autodiscriminate a ll standard bar codes.
2 S CANNER AND A CCESSORIES • MS860 or MS863 Laser Bar Code Projection Scanner • Installation and User’s Gui de .................................................... ML PN 00-02202 • ScanSelect ® Scanner Progra mming Gu ide ...................
3 S CANNER C ONNECTIONS TO THE H OST To avoid potential problems, do not pow er up the scanner until the communication cable is secu red to the host. 1. Turn off the host system. 2. Connect the 25-pin D-type connecto r on the scanner’s head cable to the communication cable.
4 C ONFIGURATION OF THE S CANNER TO THE H OST S YSTEM The MS860/MS863 is shipped from the fact ory programmed to a set of default conditions noted in the Default Settings section of this guide and in the ScanSelect ® Scanner Programming Guide provided.
5 C LONING F EATURE The cloning feature is used to program several scanners with the same settings. To clone a scanner: 1. Turn OFF the power to both scanners by unplugging the transformers. 2. Connect the cloning cable ( MLPN 51-51544) between the tw o scanners.
6 V ERSION 11 IBM 46XX S CANNER Output Format: IBM RS-485 serial input/output for the 4680 and 4690 (46XX) point-of-sale terminals The Version 11 46XX interface can be used in several different ways. Both the 46XX terminal and the scanner must be configured to match each other.
7 C ONFIGURING THE MS860-11/MS863-11 S CANNER Located in the Version 11 scanner are two computer boards. One computer board is for decoding and the other for 46XX IO processing. The decode board is configured using ScanSet or ScanSel ect wh ile the IO board is configured with an internal DIP Switch bank.
8 C ONFIGURING THE IBM 46XX The 4683 and 4693 terminals are configured on the store controller. The 4684 and 4694 terminals are typically configured on the individual terminals. Follow the appropriate guide for your type of equipment. IBM 4683 and 4693 Terminals Driven by a 46XX Store Controller Running 4680.
9 V ERSION 17 K EYBOARD W EDGE S CANNER The MS860/MS863 scanner (version 17) provides keyboard emulation by converting the scanned bar code data to the PC keyboard scan code equivalent.
10 C ONNECTION OF A MS860-17 S CANNER TO A PC 1. If the PC is on, exit your application and turn the PC off. 2. Disconnect the keyboard from the PC . Plug the Keyboard Wedge cable to the PC and the keyboard. Use the adapter cable if necessary. 3. Connect the 25-pin D-type connecto r on the scanner’s head cable to the Keyboard Wedge cable.
11 O PTIONAL I N -C OUNTER M OUNTING O PTIONS F OR THE MS860 Metrologic has designed three plates to accommodate in-counter installation of the MS860. Included automatically w ith the purchase of the MS860 is Metrologic part #45-45471, Installation Plate.
12 V ERTICAL S TAND K IT Vertical Stand Kit, MLPN 45-45472 includes: a. Vertical Stand [ MLPN 45-45472 ] Qty. 1 b. #6-32 x 3/8” Phillips Head Screw [ MLPN 18-18317 ] Qty.
13 S CANNER P ARTS n Touch Plate When a specified time has elapsed without any scanning, the unit will enter a “standby” mode. Touching the touch plate arrow on the top cover will reactivate the scanner. o Red LED When the red LED flashes ON , the scanner has read a bar code successfully.
14 The MS860 T OUCH P LATE The MS860 will enter “standby” w hen it remains dormant for a time. When the scanner’s computer is on “standby," touc hing the touch plate w ill “wake up” the scanner and activate the laser. When the green LED comes on, the scanner is powering up for full operation.
15 V ISUAL I NDICATORS There is a red and green LED at the top of the scanner . When the scanner is on, the flashing or stationary activity of the LEDs indicates the status of the scan and scanner. Steady Green When the laser is on, the green LED is also on.
16 V ISUAL I NDICATORS Signaux optiques Sur la partie supérieure du scanner se trouvent une diode LED rouge et une diode LED verte. Quand le scanner est sous tension, les diodes rouge et verte clignotantes ou allumées vous informent sur l'état du scanner.
17 V ISUAL I NDICATORS Optische Anzeigen Auf dem Scanner befinden sich eine rote und eine grüne Leuchtdiodenanzeige. Bei eingeschaltetem Scanner geben I hnen die blinkenden oder feststehenden Leuchtdiodenanzeigen Aufschluß über den Abtast- und Scannerstatus.
18 V ISUAL I NDICATORS Segnali ottici Sullo scanner si trovano due diodi lumi nosi: uno rosso e uno verde. Quando lo scanner è inserito, i diodi luminosi, che possono o essere accesi in continuazione o lampeggiare, Vi informano sullo st ato della scansione e dell’apparecchio.
19 V OLUME S ETTINGS There are four volume settings available: low, medium, high and no volume. The operator can temporarily change the volume of t he scanner by scanning the bar codes on the volume control card.
20 V OLUME S ETTINGS (C ONT .) 0 12345 88887 8 Scan for Softer Volume.
21 L ABELS There is one label located inside the window of the scanner noti ng that the device is a CDRH Class IIa laser product and IEC 825 LASERKLASSE 1.. Another label, located on the back of the unit, shows the model number, date of manufacture, and serial number.
22 D EPTH OF F IELD Through the glass at the front of the scanner, safe, low pow ered laser beams are projected in a complex pattern that rese mbles a spider web. Each of the five scan fields that generate the scan pattern extend to a range of 127mm (5.
23 D EPTH OF F IELD AND S YMBOL S PECIFICATION C ODE T YPE M INIMUM S MA LL E LEME NT M IL . (1/1000) C ODE D ENSITY D EPTH OF F IELD UPC/EAN 10.4 80% 0" - 5" UPC/EAN 13.0 100% 0" - 6.5" Code 39 7.5 High 0" - 3" Code 39 12.
24 D EPTH OF F IELD AND S YMBOL S PECIFICATION M INIMUM B AR C ODE E LEMENT W IDTH ABCDE mm .19 .25 .31 .33 .53 mils 7 . 5 1 01 21 32 1 Figure 7: Depth of Field and Symbol Specification.
25 M AINTENANCE Smudges and dirt can interfere with the proper scanning of a bar code. Therefore, the output window will need occasional cleaning. 1. Spray glass cleaner onto lint free, non-abrasive cleaning cloth.
26 S PECIFICATIONS MS860 AND MS863 S PECIFICA TIONS Application: In-Counter Laser Bar Code Scanner Light Source: VLD 650 ± 10 nm Laser Power 0.525 mW (peak) Laser Class CDRH: CLASS IIa; EN60825-1:1994/A11:1996 Class 1 UL/CSA/TUV: UL Listed, UL 1950; CSA certified, C22.
27 S PECIFICATIONS (C ONT .) MS860 AND MS863 S PECIFICA TIONS O PERA TIONA L Depth of Field: 0 mm - 203 mm (0" - 8"), programmable Minimum Bar Width: 0.
28 D EFAULT S ETTINGS Many function of the scanner can be “ programmed” - that is, enabled or disabled. The scanner is shipped from t he factory programmed to a set of default conditions. The default parameter of the scanner has an asterisk (*) in the charts on the following pages.
29 D EFAULT S ETTINGS (C ONT .) P ARAM E TE R D EFAULT OCIA IBM 46XX K EYBOARD W EDGE RS-232* P ARAL L EL L IGHT P EN Paraf Support 99 9 9 9 Matrix 2 of 5 99 9 9 EAN-8 * 99 9 9 9 9 EAN-13 * 99 9 9 9 9 UPC-E * 99 9 9 9 9 UPC-A * 99 9 9 9 9 ITF Symbol Lengths Var.
30 D EFAULT S ETTINGS (C ONT .) P ARAM E TE R D EFAULT OCIA IBM 46XX K EYBOARD W EDGE RS-232* P ARAL L EL L IGHT P EN Multi-drop Address Beeper Tone Normal 99 9 9 9 9 Fast Beep 99 9 9 9 9 Volume Setti.
31 D EFAULT S ETTINGS (C ONT .) P ARAM E TE R D EFAULT OCIA IBM 46XX K EYBOARD W EDGE RS-232* P ARAL L EL L IGHT P EN Same Symbol Rescan Timeout: 500 msecs * 99 9 9 9 9 Same Symbol Rescan Timeout: 125.
32 D EFAULT S ETTINGS (C ONT .) P ARAM E TE R D EFAULT OCIA IBM 46XX K EYBOARD W EDGE RS-232* P ARAL L EL L IGHT P EN Transmit EAN-8 Check Digit * 99 9 9 9 Transmit UPC-A Number System * 99 9 9 9 Tran.
33 D EFAULT S ETTINGS (C ONT .) P ARAM E TE R D EFAULT OCIA IBM 46XX K EYBOARD W EDGE RS-232* P ARAL L EL L IGHT P EN CLSI Editing 99 9 9 French PC Term 9 Transmit AIM ID Characters 99 Nixdorf ID 99 U.
34 D EFAULT S ETTINGS (C ONT .) P ARAM E TE R D EFAULT OCIA IBM 46XX K EYBOARD W EDGE RS-232* P ARAL L EL L IGHT P EN Keyboard Type AT 9 Caps Lock 9 Alt Mode 9 Inter Scan Code Delay 800 µsec 9 Transm.
35 S CANNER P INOUT C ONNECTIONS Version “1” Pin Assignments for RS-232, OCIA and Light Pen Emulation The version “1” scanner head cable is terminated with a male 25-pin D-type connector. Connecting the scanner to the host device may require a communication cable.
36 S CANNER P INOUT C ONNECTIONS Version “2” Pin Assignments for Parallel Communication The version “2” scanner head cable is terminated with a male 25-pin D-type connector. Connecting the scanner to the host device may require a communication cable.
37 S CANNER P INOUT C ONNECTIONS Version “11” Pin Assignments for RS-485 The version “11” scanner head cable is terminated with a male 25-pin D-type connector.
38 S CANNER P INOUT C ONNECTIONS Version “17 ” Pin Assign ments for Key board Wedge, RS-232 and Ligh t Pen Emulation The version “17” scanner head cable is terminated with a male 25-pin D-type connector. Connecting the scanner to a PC, requires a communication cable and a transformer.
39 Limited Warranty The MS860 and MS863 scanners are manufactured by Metrologic at its Blackwood, New Jersey, U.S.A. facility. The MS860 and MS863 scanners have a tw o (2) year limited warranty from the date of manufacture.
40 N OTICES Notice This equipment has been tested and found to comply w ith limits for a Class A digital dev ice, pursuant to part 15 of the FCC Rules. These limits are desi gned to prov ide reasonable protection against harmful interference w hen the equipment is operated in a commercial environment .
41 N OTICES (C ONT .) Attenzione L’utilizzo di sistemi di controllo, di regolazioni o di procedimenti diversi da quelli descrit ti nel presente Manuale può provocare delle esposizioni a raggi la ser rischiose. I l cliente non deve assolutamente tentare di riparare egli stesso lo scanner laser.
42 P ATENTS Patent Information This METROLOGIC product may be covered by one o r more of the following U.S. Patents: U.S. Patent No. 4,360,798; 4,369,361; 4,387,297; 4,460,120; 4,496,831; 4,593,186; 4.
43 I NDEX A Adapter C able ............... 1, 6, 10, 38 Applicat ion ................................... 10 B Bar codes .......................... 1, 19, 27 Base .............................................. 8 Beeper ........... 3, 4, 7, 10, 15, 18, 27 C Cable .
44 I NDEX S ScanSelect .. 1, 2, 4, 7, 9, 14, 19, 38 ScanSet ............ 1, 4, 7, 9, 14-19, 38 Servic e ........................................ 39 Specificati ons ........................ 26, 27 Stand ................................. 2, 12, 14 T Temperat ure .
N OTES.
N OTES.
.
August 2002 Printed in the USA 00 - 02202 A.
デバイスMetrologic Instruments MS863の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Metrologic Instruments MS863をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMetrologic Instruments MS863の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Metrologic Instruments MS863の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Metrologic Instruments MS863で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Metrologic Instruments MS863を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMetrologic Instruments MS863の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Metrologic Instruments MS863に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMetrologic Instruments MS863デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
