MieleメーカーCS1223I-1の使用説明書/サービス説明書
ページ先へ移動 of 48
Operating and installation instructions Induction wok CS 1223-1 To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time.
Guide to the appliance .............................................4 Warning and Safety instructions .....................................6 Caring for the environment .........................................1 5 Before using for the first time ......
Appliance and building-in dimensions ...............................3 5 Preparing the worktop .............................................3 6 Installation of several appliances ....................................3 7 Fixing the spring clamps and spacer bars .
a Wok basin ( C ) 300 mm / rating: normal: 2400 W with Booster: 3200 W b Wok c Control d Indicators e Display Indicators f In-operation indicator g Booster indicator h Residual heat indicator Guide to.
Display ß No wok on cooking zone, or wok unsuitable A Auto heat-up F Fault message (See "Problem solving guide") C / 0 Safety switch-off (See "Safety features") I Booster in opera.
This appliance is built in accordance with current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time.
Correct application ~ The wok is not designed for commercial use. It is intended for use in domestic households and similar working and residential environments. ~ The appliance is not intended for outdoor use. ~ It is intended for domestic use only to cook food and keep it warm.
Safety with children ~ Children under 8 years of age must be kept away from the wok unless they are constantly supervised. ~ Children 8 years and older may only use the wok if they have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation.
Technical safety ~ Installation, maintenance and repairs may only be carried out by a Miele authorised service technician. ~ A damaged appliance could be dangerous. Before installation, check the appliance for visible signs of damage. Do not use a damaged appliance.
~ Never open the casing of the appliance. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults. ~ While the appliance is under guarantee, repairs should only be undertaken by a Miele authorised service technician.
Correct use ~ Oil and fat can overheat and catch fire. Never leave the appliance unattended when cooking with oil or fat. If oil or fat does catch fire, do not attempt to put out the flames with water. Disconnect the appliance from the mains and use a suitable fire blanket, saucepan lid, damp towel or similar to smother the flames.
~ If the wok is installed behind a kitchen furniture door, it may only be used with the furniture door open. Do not close the door whilst the appliance is in use or whilst there is any residual heat present. ~ The wok gets hot when in use and remains hot for quite a while after being switched off.
~ Wok pans which boil dry can cause damage to the ceramic glass. Do not leave the appliance unattended whilst it is being used. ~ Grains of salt, sugar and sand (e.g. from cleaning vegetables) can cause scratches if they get under pan bases. Make sure that the ceramic surface is clean before placing pans on it.
~ To prevent damage to items which are susceptible to magnetic fields, e.g. credit cards, digital storage devices, pocket calculators, etc, do not leave them in the immediate vicinity of the wok. ~ Metal utensils stored in a drawer under the wok can become hot if it is used intensively for a long time.
Disposal of the packing material The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled.
Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service, data plate, guarantee" section of this booklet. Cleaning for the first time ^ Remove any protective wrapping and adhesive labels.
The induction principle An induction coil is located underneath the induction wok. When the appliance is switched on, this coil creates a magnetic field. This magnetic field in turn creates, or induces, current in the base of the wok on it. The wok basin itself is heated up indirectly by the heat given off by the wok pan.
Noises The following noises might occur when the induction wok is in operation: – On the higher power settings, it might buzz. This will decrease or cease altogether when the power setting is reduced. – You might hear a clicking sound from the electronic switches, especially on lower settings.
Switching on and off The induction wok is switched on by turning the control clockwise a to the power setting required, and is switched off by turning the control anti-clockwise b to "0". You cannot turn the control to "0" by turning it past BI.
Settings Cooking process Settings Keeping food warm, melting chocolate 1-2 Warming food up 3 - 6 Stir-frying, e.g. Chinese dishes 7- 9 Auto heat-up Continued cooking setting Heat-up time in minutes and seconds (approx.
Booster function The induction wok is equipped with a booster function which increases the power level. If activated, the appliance will operate on power setting 9 with an extra boost of power for a period of 10 minutes. Taking the wok off the appliance whilst the Booster is in operation interrupts the Booster.
System lock The induction wok is fitted with a system lock to prevent unauthorised use, e.g. by children. To activate the system lock ^ Turn the control anti-clockwise as far as it will go, and hold in that position until L appears in the display. Every time the control is touched after this, an L will show in the display for 3 seconds.
Safety switch-off The induction wok is fitted with a safety switch-off feature in case you forget to switch it off yourself. If the induction wok is heated for an unusually long period of time (see chart), and the power setting is not altered, it will switch itself off automatically.
Overheating protection The induction coil is equipped with overheating protection. Before the induction coil gets too hot, overheating protection cuts in in one of the following ways: – If the booster function is being used it will be switched off.
Miele offer a range of branded cleaning and conditioning products. See "Optional accessories". , Do not use a steam cleaning appliance to clean this appliance. The steam could reach electrical components and cause a short circuit. The appliance should be cleaned after each use.
Ceramic surface Do not use washing-up liquid to clean the ceramic surface. Washing-up liquid will not remove all soiling and deposits. It will form an invisible coating which will cause permanent discolouration of the ceramic surface. Clean the appliance regularly with a suitable ceramic hob cleaning agent.
, Installation work and repairs to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous.
... one of the following has occurred: – The booster has automatically switched off early. – C and 0 flash alternately in the display. The overheating protection mechanism has been triggered (see "Overheating protection").
Miele offer a comprehensive range of useful accessories as well as cleaning and conditioning products for your Miele appliances. These products can be ordered online at: or from Miele (see back cover .
Fit the wall units and extractor hood before fitting the appliance to avoid damaging the surface. ~ The veneer or laminate coatings of worktops (or adjacent kitchen units) must be treated with 100 ° C heat-resistant adhesive which will not dissolve or distort.
Safety distance above the appliance A minimum safety distance must be maintained between the appliance and the cooker hood above it. See the cooker hood manufacturer's operating and installation instructions for details.
Safety distances to the sides of the appliance Ideally the appliance should be installed with plenty of space on either side. There may be a wall at the rear and a tall unit or wall at one side. On the other side, however, no unit or divider should stand higher than the built-in appliance (see illustrations).
Safety distances underneath the hob To ensure sufficient ventilation to the hob, a certain gap must be left between the underside of the hob and any oven, interim shelf or drawer. The minimum gap between the underside of the hob and – the top of an oven is 15 mm .
Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e.
CS 1223-1 a Spring clamps b Front c Casing depth d Mains connection cable, L = 2000 mm Appliance and building-in dimensions 35.
^ Make the worktop cut-out for one or more appliances in accordance with the building-in diagrams. Remember to maintain a minimum safety distance from the back wall , as well as from any tall unit or side wall to the right or left of the appliance. See "Safety instructions for installation".
When installing two or more appliances next to each other a spacer bar b must be used between each one. See "Fixing the spring clamps and spacer bars". Worktop cut-out - two appliances Worktop cut-out - three appliances To calculate the cut-out width (D) required: Add up the widths of each appliance (e.
a Spring clamps b Spacer bars c Gaps between spacer bars and worktop d Cover strips The illustration shows a worktop cut-out with spring clamps a and spacer bars b for 3 appliances.
Wooden worktops ^ Position the spring clamps supplied a and spacer bars b on the top edge of the cut-out in the positions marked. ^ Secure the spring clamps and spacer bars with the 3.
Granite and marble worktops The screws are not required for granite or marble worktops. ^ Position and secure the spring clamps a and spacer bars b using strong, double-sided adhesive tape c . ^ Apply silcone to the side edges and the lower edges of spring clamps a and spacer bars b .
^ Feed the connection cable down through the cut-out. ^ Starting at the front, position the appliance in the worktop cut-out. ^ Using both hands, press down evenly on the sides of the appliance until it clicks into position. When doing this make sure that the seal under the appliance sits flush with the worktop on all sides.
Seal between the appliance and the worktop The sealing strip under the edge of the top part of the appliance provides a sufficient seal for the worktop. The appliance must not be sealed with sealant (e.g. silicone). This could result in damage to the appliance or the worktop if it ever needs to be removed for servicing.
All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK).
Important The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system, which complies with local and national regulations.
In the event of any faults which you cannot remedy yourself, or if the appliance is under guarantee, please contact: – Your Miele dealer, or – the Miele Service Department (see back cover for address). Please note that telephone calls may be monitored and recorded to improve our service.
46.
47.
Alteration rights reserved/ 5012 M.-Nr. 09 551 700 / 01.
デバイスMiele CS1223I-1の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Miele CS1223I-1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMiele CS1223I-1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Miele CS1223I-1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Miele CS1223I-1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Miele CS1223I-1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMiele CS1223I-1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Miele CS1223I-1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMiele CS1223I-1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
