Mieleメーカーpg8080uの使用説明書/サービス説明書
ページ先へ移動 of 84
Operating instructions Commercial dishwasher P G8 0 8 0U/P G 8080i To avoid the risk of personal injury or damage to the appliance, it is essential that you read the operating and installation instructions before installation and use.
Guide to the manual ...............................................5 Guide to the commercial dishwasher .................................6 Overview .........................................................6 Control panel ..............................
Cutlery ..........................................................3 5 Cutlery basket ..................................................3 5 Operating the commercial dishwasher ...............................3 6 Detergent ...............................
Service .........................................................6 4 Repairs .......................................................6 4 Program updates ...............................................6 4 Electrical connection ..........................
Text which is highlighted or emphasized Warnings , Warnings marked with a thick framed box and a warning symbol contain safety information concerning potential injury and damage. ! Read the warnings carefully and follow the instructions and directions.
Overview a Upper spray arm (not visible) b Upper basket c Middle spray arm d Air inlet for drying e Lower spray arm f Filter combination g Data plate h Child safety feature in the door handle (not vis.
Control panel a Program selection b Display c Start/Stop button with indicator light d 4 ü button, (additional programs) with indicator light e , button (Delay start) with indicator light f G button .
This commercial dishwasher complies with all current safety requirements. However, improper use can result in personal injury and material damage. To avoid the risk of accidents and damage to the appliance, read the operating instructions carefully before using the appliance for the first time.
~ This commercial dishwasher is intended for stationary indoor use. ~ The special inserts are to be used for their specific purpose only. ~ Individuals who are incapable of using the appliance safely .
Proper installation ~ Do NOT install the appliance in an area where there is a risk of explosion or freezing. ~ To ensure the stability of undercounter commercial dishwashers, they must only be installed beneath a continuous countertop that is bolted to the adjacent cabinetry.
~ Do not connect the appliance to the electrical power supply until all the installation work has been completed, including adjustment of the door spring. ~ The electrical safety of this appliance is only ensured if it is properly grounded in compliance with applicable safety regulations.
~ Do NOT use the appliance if the power cord is damaged. A damaged power cord must be replaced with a special cord. For safety reasons, the cord must be installed by Miele Service. ~ Before servicing the appliance, disconnect it from the power supply.
Proper use ~ This commercial dishwasher is designed only for operation with water and detergents designed for dishwashers or professional dishwashers. Organic solvents or flammable liquids must NOT be used in the appliance. There is a risk of explosion and/or damage through the destruction of rubber or plastic components resulting in leaks.
~ Foam escaping from the wash cabinet can damage the appliance. If any foam is escaping, cancel the program immediate - ly! ~ When using detergents and special products, always follow the manufacturer's instructions.
Children in the vicinity ~ Always supervise any children in the vicinity of the appliance. Never allow children to play with the appliance. Among other hazards, children run the risk of locking themselves in the commercial dishwasher! ~ Do not allow children to operate the commercial dishwasher.
Disposal of the packaging The packaging protects the commercial dishwasher from damage during shipping. They have been selected for environmental friendliness and can be recycled.
Energy saving washing This commercial dishwasher is a water and energy saving appliance. For best results follow these tips: ^ You may connect the commercial dishwasher to a hot water line. This is particularly suitable with energy-saving water heating sources such as solar energy systems.
Opening the door At the end of programs with a drying cycle (see "Program guide") the door will automatically open a little in order to improve the drying. You can cancel this function (see "Settings menu - AutoOpen"). ^ To open the door, reach under the door grip and pull.
Display functions General The following functions can be selected or set with the display: – the wash program – the Delay start time – the settings The following appears in the display while a p.
Basic settings ^ Press the - button to turn the commercial dishwasher on. If the commercial dishwasher is being turned on for the first time, the welcome screen will appear. Language The display automatically switches to the language setting. For details about the display, see chapter Display.
Before using the commercial dishwasher for the first time you will need: – approx. 1 kg reactivation salt, – approx. 110 ml rinse aid, – for detergent see "Operating the commercial dishwasher". For available process chemicals from Miele contact Miele Professional.
^ Only open the door half way when adding salt to avoid spilling it. ^ Press the button on the top of the salt reservoir in the direction of the arrow. The cover will pop open. ^ Open the funnel. Do not fill water into the salt reservoir! ^ Only add just enough salt to fill the reservoir.
Refill salt indicator ^ Refill the salt reservoir as soon as the F Add salt message is displayed (if it appears during a program, wait until the end of the program).
Rinse aid Rinse aid helps to prevent spotting on dishes and glassware and speeds up the drying process. The rinse aid is filled into the reservoir and the set amount will be automatically dispensed. For available process chemicals from Miele contact Miele Professional.
^ Pour rinse aid into the reservoir until it is visible in the opening. The rinse aid reservoir holds approximately 110 ml. ^ Close the cover until you hear it click shut, otherwise water might enter the reservoir during the wash program. ^ Wipe up any spilled rinse aid to prevent over-foaming during the next wash program.
Tips: Remove coarse food residues from the dishware. There is no need to rinse items under running water! , Do not wash items soiled with ash, sand, wax, grease or paint in the commercial dishwasher. These materials damage the commercial dishwasher. All items can be placed anywhere in the baskets.
Items not recommended for dishwashing: – Wooden cutlery and dishes or items with wooden parts, as they may discolour and fade. In addition, the glue used in these items is not dishwasher-proof. This may result in wooden handles coming loose. – Hand-crafted items, antiques, valuable vases and decorative glassware are also not dishwasher-proof.
Typical load for 10 place settings with cutlery basket Upper basket Lower basket Cutlery basket Loading the commercial dishwasher 28.
Typical load for 13 place settings with cutlery basket Upper basket Lower basket Cutlery basket Loading the commercial dishwasher 29.
Upper basket , For safety reasons use the commercial dishwasher with both the upper and lower baskets inserted. ^ Load the upper basket with small, lightweight or delicate items such as cups, saucers, glasses, dessert bowls, etc. Shallow pans can also be placed in the upper basket.
XXL cup rack The cup rack can be set to two different widths so that it can also accommodate large cups. ^ Pull the cup rack upwards and click it back into position at the required width. Glass support bar The support bar will hold tall glasses and stemware securely.
Adjusting the upper basket In order to gain more space for taller items in the lower or upper basket, the upper basket can be adjusted to three levels of about 2 cm height difference between each level. The upper basket can also be set at an angle with one side high and the other side low to improve water drainage.
Lower basket ^ Place larger and heavier items such as plates, serving platters, saucepans, bowls, etc. in the lower basket. It can also be used for glasses, cups, small plates and saucers. Commercial dishwasher with cutlery basket ^ Place very large plates in the centre of the lower basket.
Glass rack ^ The glass rack can be folded up to make more room for tall items. ^ Stemware, e.g. wine, champagne and beer glasses, can be leaned against the glass rack or suspended from it. The height of the glass rack is adjustable. ^ Slide the glass rack to the desired height until the catches click into place at the top and rest on the bottom.
Cutlery Cutlery basket The cutlery basket can be placed anywhere on the front rows of spikes in the lower basket. ^ To avoid risk of injury, knives and forks should be placed with the handles facing up in the basket. However, cutlery placed handle-down in the basket will come out cleaner and drier.
Detergent , Avoid inhaling powder detergents. Avoid swallowing dishwasher detergent! Detergents can cause chemical burns to nose, mouth and throat. Consult a doctor immediately if detergent has been swallowed or inhaled. Always keep detergent out of the reach of children.
Adding detergent ^ Press the button on top of the detergent dispenser. The cover will pop open. The cover is always open at the end of a program. ^ Add powder detergent or detergent tabs to the compartments and close the cover. ^ Do not forget to close the detergent container.
Turning the commercial dishwasher on ^ Turn on the water supply if it is off. ^ Make sure the spray arms can rotate freely. ^ Close the door. ^ Press the - button to turn the commercial dishwasher on. The factory-set Normal program will appear in the display and the matching indicator light will come on.
Time display Before the program starts, the display shows the runtime of the selected program in hours and minutes. The remaining runtime is displayed during the program.
End of program The program has finished when O Finished or AutoOpen appears in the display and the door is slightly ajar (if applicable). If Extra drying was selected and AutoOpen is active, the drying fan will run for a few minutes after the program has ended.
Interrupting a program A program will be interrupted as soon as the door is opened. When the door is closed again, the program will continue from where it was interrupted. , Water in the commercial dishwasher is hot. Risk of scalding! Only open the door if absolutely necessary and be very careful.
Extra drying For better drying results and to reduce the amount of steam that escapes when the door is opened, the Extra drying function extends the fan runtime at the end of the program. This function is not available for all programs (see Program guide).
^ Press the Start/Stop button. The Start/Stop indicator light comes on. If you don't press Start/Stop within a few seconds after you have set the Delay start time, the program runtime will appear in the display again. You will have to set the Delay start time again.
Check the overall condition of your commercial dishwasher regularly (approx. ever y4-6 months). This will help to prevent problems. , The outer surfaces of the commercial dishwasher are susceptible to scratching. Contact with unsuitable cleaning agents can alter or discolour the outer surfaces.
To avoid damage to the outer surface, do not use: – cleaning agents containing soda, ammonia, acid or chloride, – limescale removers, – abrasive cleaners such as scouring powder, scouring liquid.
Checking the filters in the wash cabinet The filter combination in the base of the wash cabinet captures large dirt particles from the wash water. This prevents them from reaching the circulation system and re-entering the cabinet through the spray arms.
The cover must be opened to clean the inside of the filter: ^ Push the clips together in the direction of the arrows as shown a , and open the cover b . ^ Clean all parts under running water. ^ Close the cover so that the lock engages. ^ Replace the filter combination so that it lies flat in the bottom of the wash cabinet.
Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be checked regularly (approx. ever y4-6 months). ^ Turn the dishwasher off. Remove the spray arms as follows: ^ Pull out the cutlery tray (if present).
You can easily resolve many of the minor problems you may encounter during everyday use. This will save you time and money because you do not have to call Miele Service. With the aid of the following guide, the cause of a problem can be found and eliminated.
Problem Possible cause Solution One of the following fault messages is displayed: Before fixing the fault: – Press the - button to turn the commercial dishwasher off. ; Fault FXX There may be a technical fault. After a few seconds: – Turn the commercial dishwasher back on.
Faults in the water intake or water drain Problem Possible fault Solution One of the following fault messages are displayed: 2 Open stopcock The water tap is closed. Open the water tap all the way. 2 Inlet Before fixing the fault: – Press the - button to turn the commercial dishwasher off.
Problem Possible fault Solution The following fault message is displayed: 2 Drain Before fixing the fault: – Press the - button to turn the commercial dishwasher off. Fault in the water drainage. There might be water in the wash cabinet. – Clean the filter combination (see Cleaning and care).
General problems with the commercial dishwasher Problem Possible fault Solution The indicator lights and the display are dark. Only the Start/Stop indicator flashes slowly. The indicators and the display turn off automatically to save energy (Standby).
Problem Possible fault Solution The detergent dispenser cover will not close. Detergent residue is blocking the latch. Remove the detergent residue. The inside of the door and/or the interior walls are wet after a program has finished. This is normal! None.
Noises Problem Possible fault Solution There is a knocking noise in the wash cabinet. A spray arm is hitting the dishware. Interrupt the program and rearrange items blocking the spray arms. There is a rattling noise in the wash cabinet. Dishware is moving around in the wash cabinet.
Poor cleaning results Problem Possible fault Solution The dishes are not clean. The dishes were not loaded correctly. See Loading the commercial dishwasher. The program was not suitable for the requirements. Select a more suitable program (see Program guide).
Problem Possible fault Solution Dishes are not dry, or glasses and cutlery are spotty. The rinse aid dosage is set too low or the rinse aid reservoir is empty. Refill the reservoir, increase the dosage, or switch the rinse aid product when refilling (see Rinse aid).
Problem Possible fault Solution Glasses have a brownish-blue discolouration; the deposit cannot be wiped off. Detergent deposits. Switch to another detergent right away. Glasses are dull and discoloured; the deposit cannot be wiped off. The glasses are not dishwasher-safe.
Cleaning the water inlet screen There is a screen in the screw connection of the water inlet hose to protect the water inlet valve. The screen must be cleaned when dirty, otherwise insufficient water will flow into the wash cabinet. , The plastic housing of the water connection contains an electric valve.
Cleaning the drain pump and non-return valve If there is water in the wash cabinet at the end of a program, the water was not pumped out properly. The drain pump or the non-return valve might be clogged. However, they are easy to clean. ^ Disconnect the commercial dishwasher from the electric power supply.
Making better use of the commercial dishwasher Optional accessories for this commercial dishwasher are available from Miele. You want to... You need... ...wash the individual parts of the Miele Cappucinatore ... a Cappucinatore insert for the upper basket .
Program Application Detergent Follow the detergent manufacturer's instructions Compartment I 1) Compartment II 1) I ProSpeed For fresh, non-sticky food residues 2 0-3 0g J Universal For normal, slightly dried food residues 2 0-3 0g K Pots & Pans For burned-on, very adherent, very dry, starchy or albuminous 1) food residues.
Program sequence Pre- rinse Main wash Interim rinse I Interim rinse II 2) Final rinse Drying Extra drying Auto Open Water plus X 65°C 1 min X 10 s (X) X 65°C 3) 30 s (X) 4) (X) X 65°C 10 min X 3 min (X) X 65°C 3) 1.5 min (X) (X) (X) X 8 min X 75°C 10 min X 3 min (X) X 65°C 3) 1.
Repairs If you cannot fix a fault with the help of this manual, please contact: – Miele Service. ^ When contacting the service department, you will need the model and serial number of your appliance. These can be found on the data plate along the right edge of the open door.
, All work on the electrical connection must be carried out by Miele Service. – The electrical installation must be in compliance with current local and national safety regulations. – The plug connection must comply with national regulations. (The electrical outlet must be accessible after the appliance has been installed.
T h eP G8 0 8 0U/P G 8080i comes equipped with a 14/3 AWG cord for connection to a standard AC 120 V, 60 Hz power outlet with a NEMA 5-15P plug. If available, the dishwasher may be connected to a 120/208-240V, 60Hz, power supply. This will increase the power to the heating elements and shorten the time of selected wash cycle.
Removing the base cover The electrical terminal is located behind the front cover in the middle of the commercial dishwasher base. , Disconnect the commercial dishwasher from the electrical power supply! , All work on the electrical connection should be carried out by Miele Service.
The Miele waterproof system Providing the dishwasher was installed correctly by a qualified technician, the waterproof system will protect you from water damage throughout the lifetime of the machine.
, To prevent damage to the commercial dishwasher, make sure all air has been bled from the supply line. ! The inlet hose must not be shortened or damaged in any way because it contains electrical wires (see illustration).
Water drainage – The drain is equipped with a non-return valve which prevents waste water from flowing back into the commercial dishwasher through the drain hose. – The commercial dishwasher drain hose should be connected to a separate drain for the commercial dishwasher only.
Model Commercial dishwasher P G8 0 8 0U/P G 8080i Height 81.5 cm (adjustable +6.5 cm) Installation height min. 81.5 cm (+6.5 cm) Width 59.8 cm Installation width 60 cm Depth PG 8080 U: 60 cm PG 8080i: 57 cm Weight PG 8080 U: max. 65 kg PG 8080i: max. 56.
Settings menu for changing standard settings Opening the Settings menu ^ If the commercial dishwasher is on, press the - button to turn it off. ^ Press and hold the Start/Stop button. ^ Turn the commercial dishwasher on with the - button and hold the Start / Stop button down for at least 4 more seconds.
Water hardness Your commercial dishwasher comes with with a water softener. You must set the system to the water hardness level of your water supply. – The commercial dishwasher must be programmed to exactly match the hardness of your water. – Your local waterworks can tell you the water hardness level in your area.
Rinse aid For best results the rinse aid dosage can be adjusted. The dosage can be set between 0-6 ml. The factory setting is 3 ml of rinse aid. If the dishes are spotty: – Use a higher rinse aid setting. If the dishes are cloudy or streaky: – Use a lower rinse aid setting.
Optimizing Standby A few minutes after the last button is pressed or a few minutes after the end of the program the commercial dishwasher will switch to Standby mode to save energy. The display and the indicator lights are switched off and only the Start/Stop indicator light flashes slowly.
The refill messages can be turned off without first refilling to let the commercial dishwasher go into Standby mode. But the fault messages cannot be turned off. Refill messages If you want the commercial dishwasher to switch to Standby mode in spite of the Refill messages, you can switch both indicator lights off together.
Detergent dosage This function becomes visible when External dos. is activated. The detergent dosage can be set in millilitres or percent. Contact Miele Professional for the setting. – Amount in ml The factory setting is 30 ml. The dosage can be set from 10 - 100 ml in 2 ml increments.
Venting the Dos. system The Dos. system will not dispense reliably if there is air in the system. The Dos. system must be vented – if it is being used for the first time, – if the liquid detergent reservoir was not refilled on time and the Dos. system was sucked empty.
Showroom program Demo mode for showrooms only! The commercial dishwasher is equipped with various demo programs. – Demo with sound : This program activates the pumps to demonstrate the sound of the dishwasher washing (without water). – Demo AutoOpen : The door will open automatically.
General requirements for measuring noise The dishwasher must be loaded with 16 place settings and the Normal program must be used. Installation requirements for measuring noise The dishwasher must be installed as follows:. ^ Install the dishwasher into an appropriate housing unit.
^ Push the insulation mat supplied (depending on model) under the plinth until it is up against the appliance feet a . ^ Attach the toe-kick so that it is flush with the door front b .
82.
83.
M.-Nr. 09 501 330 / 01 Subject to change without notice / Publication date 2013-06-12.
デバイスMiele pg8080uの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Miele pg8080uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMiele pg8080uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Miele pg8080uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Miele pg8080uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Miele pg8080uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMiele pg8080uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Miele pg8080uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMiele pg8080uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。