MitsubishiメーカーLCD4000の使用説明書/サービス説明書
ページ先へ移動 of 37
LCD4000 40" LCD Colour Monitor User’ s Man ual.
Index Declaration of conf ormity ...................................................................................................... .......................... English-1 Impor tant Inf or mation .....................................................
English -1 English DECLARA TION OF CONFORMITY This device complies with P ar t 15 of FCC Rules. Operation is subject to the f ollowing two conditions. (1) This device ma y not cause har mful interference , and (2) this device must accept an y interference received, including interf erence that may cause undesired operation.
English-2 Dec laration Declaration of the Man ufacturer We hereb y cer tify that the colour monitor LCD4000 is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC.
English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NO TE THE FOLLO WING WHEN SETTING UP AND USING THE LCD4000 LCD COLOUR MONIT OR: • DO NO T OPEN THE MONITOR . There are no user ser viceable parts inside and opening or removing cov ers may e xpose you to dangerous shoc k hazards or other risks.
English-4 REMOTE CONTROLLER RU-M104 Contents P ower Cord User ’ s Man ual PC - Video Signal Cable (D-SUB to D-SUB Cable) Wireless Remote Control and AA Batteries Clamper x 2 Y our new LCD4000 LCD mo.
English-5 English 7 DO WN ( ) button Activates the OSM men u when the OSM menu is turned-off. Acts as button to mo ve the highlighted area down to select the adjustment with OSM menu. 8 EXIT button Activates the OSM men u when the OSM menu is turned-off.
English-6 T erminal Panel 6 A UDIO IN 1, 2, 3 T o input audio signal from e xternal equipment such as a computer , VCR or D VD player . 7 A UDIO OUT T o output the audio signal from the A UDIO IN 3 jack. 8 VIDEO VIDEO IN connector (BNC and RCA): T o input a composite video signal.
English-7 English 1 PO WER button Switches the pow er on/off. * If P ower Indicator is not glo wing, then none of the controls will work. 2 INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [D VD/HD], [VIDEO]. 3 A UDIO INPUT button Selects from input audio signal, [A UDIO1], [A UDIO2], [A UDIO3].
English-8 P oint the top of the remote control toward the LCD monitor ’ s remote sensor during button operation. Use the remote control within a distance of about 7 m from the front of the LCD monitor ’ s remote control sensor and at a horizontal and ver tical angle of within 30 ° within a distance of about 3 m.
English-9 English 1. Determine the installation location CA UTION: DO NOT A TTEMPT TO INST ALL THE LCD MONIT OR BY Y OURSELF Installing your LCD displa y must be done by a qualified technician. Contact your dealer f or more information. CA UTION: MO VING OR INST ALLING THE LCD MONIT OR MUST BE DONE BY TW O OR MORE PEOPLE.
English-10 T o av oid falling down F asten the LCD monitor to wall or pillar with a cord or chain which is sufficient to suppor t the weight of the LCD monitor (appro x.
English-11 English Hole of stand Claw of Monitor Stand Screw M5 x 40 How to install stand 1. Please turn monitor off. 2. Inser t claws of monitor to stand holes until clicks . 3. F asten 2 screws (M5 x 40) of both side. T orque 280 ~ 300N cm How to remo ve the stand 1.
English-12 Mounting P osition of Ferrite Core F errite Core T o connector of PC T o A UDIO 1 of monitor Attaching the Ferrite Core Attach the Ferrite Core to PC A udio Cable and S-VIDEO Cable. Use of the cable without mounting the f err ite core will result in the occurrence of noise.
English-13 English Connecting a P ersonal Computer Connecting your computer to y our LCD monitor will enable you to displa y your computer ’ s screen image.
English-14 Connecting your Macintosh ® computer to y our LCD monitor will enable y ou to display your computer ’ s screen image. Some video cards or drivers ma y not display images correctly .
English-15 English LCD monitor Equipment with a digital interface such as a personal computer with RGB output (TMDS) D VI-D connector D VI-D connector T o D VI output T o audio output Connections can be made with equipment that is equipped with a digital interface compliant with the D VI (Digital Visual Interf ace) standard.
English-16 T o VIDEO IN BNC RCA VCR or Laser disc play er T o VIDEO IN LCD monitor (second monitor) BNC RCA DIN 4 pin DIN 4 pin T o VIDEO OUT T o S-VIDEO OUT LCD monitor T o audio right output Connecting your VCR or laser disc play er to your LCD monitor will enable y ou to display your VCR ’ s or laser disc play er ’ s video .
English-17 English Connecting your D VD pla yer to your LCD monitor will enab le you to display D VD video. Ref er to your D VD player user ’ s manual f or more inf ormation. Connect the LCD Monitor to a D VD Play er • T o connect the RGB 3 D VD/HD In connector (BNC) on the LCD monitor , use a separately av ailable BNC connector cable .
English-18 Y ou can connect your stereo amplifier to your LCD monitor . Refer to y our amplifier user ’ s manual f or more information. Connect the LCD Monitor to a Stereo Amplifier • T urn on the LCD monitor and the amplifier only after all connections have been made .
English-19 English Basic Operation P ower ON and OFF Modes The LCD monitor power indicator will turn green while pow ered on, or red when in off mode. The monitor can be powered on or off using the f ollowing three options: 1. Pressing the power b utton.
English-20 P ower Indicator Using P ower Management The LCD monitor follo ws the VESA appro ved DPMS P ower Management function. The power management function is an energy sa ving function that automatically reduces the power consumption of the display when the k eybord or the mouse has not been used for a fix ed period.
English-21 English OSM (On-Screen-Manager) Contr ols - Computer Input Press UP or DOWN b utton to select sub-menu Press SET button to decide Press UP or DOWN, and PLUS or MINUS button to select functi.
English-22 T o adjust the colour temperature of entire screen. COLOR Adjusting power colour temper ature make the screen TEMPERA TURE reddish and adjusting higher colour temperature make the screen bluish. Selecting Picture reset allows you to reset all OSM settings related to PICTURE.
English-23 English Main-Menu PICTURE IN PICTURE Sub-Menu Selecting the size of picture inserted at the “ Picture-in Picture ” (PIP) mode. PIP SIZE “ Large ” , “ Middle ” , “ Small ” and “ REMOTE-PIP ” are av ailable. Selecting the sound source in PIP mode.
English-24 Selecting the power management ON/OFF mode . PO WER SA VE OSM control menus are av ailable in se ven languages. LANGU A GE In the OSM Time menu, you can select how long the OSM information will sta y after Display ke y push. OSM TIME A time between 3 and 30 seconds, is a vailable .
English-25 English OSM (On-Screen-Manager) Contr ols - D VD&HD Input Main-Menu A UDIO Sub-Menu T o accentuate or quiet the high frequency sound. TREBLE Press + button to increase TREBLE sound. Press - button to decrease TREBLE sound. T o accentuate or quiet the low frequency sound.
English-26 Main-Menu PICTURE IN PICTURE Sub-Menu Selecting the size of picture inserted at the “ Picture-in Picture ” (PIP) mode. PIP SIZE “ Large ” , “ Middle ” , and “ Small ” are av ailable.
English-27 English OSM (On-Screen-Manager) Contr ols - A V Input Main-Menu PICTURE Sub-Menu Adjusts the over all image and background screen brightness. BRIGHTNESS Press + button to increase brightness. Press - button to decrease brightness. Adjusts the image brightness in relation to the back ground CONTRAST Press + button to increase contrast.
English-28 Main-Menu A UDIO Sub-Menu T o accentuate or quiet the high frequency sound. TREBLE Press + button to increase TREBLE sound. Press - button to decrease TREBLE sound. T o accentuate or quiet the low frequency sound. BASS Press + b utton to increase BASS sound.
English-29 English T o select OFF TIMER mode ON/OFF . OFF TIMER In the OFF TIMER menu, you can select monitor auto turn off time after monitor has been tur ned on. A time between 1 and 24 hours, is a vailable . T o select SCREEN SA VER mode, select ON/OFF .
English-30 Contr olling the LCD monitor via RS-232C Remote Control This LCD monitor can be remote controlled by connecting a computer with RS-232C interf ace. The follo wing functions can be controlled by a computer : • T urn the monitor ON or OFF .
English-31 English 3) Control sequence (1) The command from a computer to the LCD monitor will be sent within 400ms. (2) The LCD monitor will send a return command 400ms* after it has received and e x ecuted a code. If the command isn ’ t received correctly , the LCD monitor will not send the return command.
English-32 Features Reduced Footprint: Provides the ideal solution f or environments requiring superior image quality but with size and weight limitations. The monitor ’ s small footprint and low weight allow it to be mo v ed or transpor ted easily from one location to another .
English-33 English T r oubleshooting No picture • The signal cable should be completely connected to the displa y card/computer. • The display card should be completely seated in its slot. • F ront P ower Switch and computer po wer switch should be in the ON position.
English-34 Specifications f or LCD4000 Product Specifications Analog Input Digital Input LCD Module (40" / 101.6cm diagonal) Pixel Pitch: 0.681mm Resolution: 1280 x 768 dots (WXGA) Colour : 16,777,216 Brightness: 450cd/m 2 (T yp.
English-35 English Pin Assignment 1) Analog RGB input (MiniDsub15p): R G B 2 Pin No Name 1 Video Signal Red 2 Video Signal Green 3 Video Signal Blue 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 9N.
デバイスMitsubishi LCD4000の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Mitsubishi LCD4000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMitsubishi LCD4000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Mitsubishi LCD4000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Mitsubishi LCD4000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Mitsubishi LCD4000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMitsubishi LCD4000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Mitsubishi LCD4000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMitsubishi LCD4000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。