MitsubishiメーカーMLM400の使用説明書/サービス説明書
ページ先へ移動 of 37
MLM400 LCD MONITOR MODEL MLM300 User Manual.
Impor t ant Inf ormation .......................................................................................................... ................ 1 Sa fe ty P recautions, Maintenance, & Re commended Use .........................................
1 Imp or t ant Inf ormation Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.
2 CAUTION Immediately unplug your monitor from the wall outlet and refer ser vicing to qualified ser vice personnel under the following conditions: • When the power supply cord or plug is damaged. • If liquid has been spilled, or objects have fallen into the monitor .
3 M LM 400 LCD MONITOR MODEL MLM300 User Manual C ontent s * Install an attached stand at the time of unpacking when it uses with the stand. * Remember to save your original box and packing material to transport or ship the monitor .
4 Y ou can attach mounting accessories to the LCD monitor in one of the following two ways: 1. In the upright position V entilation Requirements for enclosure mounting To allow heat to disperse, leave space between surrounding objects as shown in the diagram to the right.
5 DOWN ( ) button Activates the on-scren menu when the on-screen menu is turned-off. Acts as button to move the highlighted area down to select the adjust- ment with on-screen menu. EXIT button Activates the on-screen menu when the on-screen menu is turned-off.
6 AUDIO IN 1,2,3 To input audio signal from external equipment such as a computer , VCR or DVD player . AUDIO OUT To output the audio signal from the AUDIO IN 3 jack. VIDEO VIDEO IN connector (BNC and RCA): T o input a composite video signal. BNC and RCA are not available at the same time.
7 POWER button Switches the power on/off. * If Power Indicator is not glowing, then no controls will work. INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [DVD/HD], [VIDEO]. AUDIO INPUT button Selects from input audio signal, [AUDIO1], [AUDIO2], [AUDIO3] SIZE button Selects picture size, [FULL], [NORMAL], [WIDE].
8 Point the top of the remote control toward the LCD monitor's remote sensor during button operation. Use the remote control within a distance of about 7 m/23 ft. from the front of the LCD monitor's remote control sensor and at a hori- zontal and vertical angle of within 30 ° within a distance of about 3 m/10 ft.
9 1. Determine the installation location CAUTION Installing your LCD display must be done by a qualified technician. Contact your dealer for more information. CAUTION MOVING OR INST ALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE. Failure to follow this caution may result in injur y if the LCD monitor falls.
10 C onne c tions Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment.
11 Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards may not display an image correctly . •T o connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor , use the provided RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin).
12 Connecting your Macintosh ® computer to your LCD monitor will enable you to display your computer's screen image. Some video cards or drivers may not display images correctly . •T o connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor , use the provided RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin).
13 Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interfa ce) standard. • The RGB 1 IN connector also accepts a DVI-D cable.
14 Connecting your VCR or laser disc player to your LCD monitor will enable you to display your VCR or laser disc player video. Refer to your VCR or laser disc player owner's manual for more information.
15 Connecting your DVD player to your LCD monitor will enable you to display your DVD video. Refer to your DVD player owner’ s manual for more information.
16 Y ou can connect your stereo amplifier to your LCD monitor . Refer to your amplifier owner's manual for more information. To audio right output RCA To audio left output VCR or Laser disc playe.
17 B as ic Op er at ion –Power ON and OFF Modes 1. Pressing the power button. NOTE: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor . 2. Using the remote control NOTE: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor .
18 The LCD monitor follows the VESA approved DPMS Power Manage- ment function. The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a fixed period of time.
19 On-Screen Menu Controls –Computer PICTURE BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL COLOR CONTROL COLOR TEMPERATURE PICTURE RESET BRIGHTNESS SET SET SET Press UP or DOWN button to select sub-menu.
20 On-screen Menu Controls –Computer continued H POSITION V POSITION CLOCK CLOCK PHASE H RESOLUTION V RESOLUTION SCREEN RESET H POSITION V POSITION CLOCK CLOCK PHASE H RESOLUTION V RESOLUTION SCREEN.
21 On-screen Menu Controls –Computer continued PIP SIZE PIP AUDIO PIP RESET PIP SIZE PIP AUDIO PIP RESET PIP SIZE LARGE MIDDLE SMALL REMOTE-PIP Sub-Menu Main-Menu Selecting the size of picture inserted at the 'Picture-in Picture' (PIP) mode.
22 On-screen Menu Controls –Computer continued OSM TIME OFF TIMER SCREEN SA VER FA CTORY PRESET OSM TIME In the OFF TIMER menu, you can preset the monitor to automatically power down. A time between 1 to 24 hours is available. In the on-screen Time menu, you can select how long the on-screen information appears, when the Display key is pressed.
23 On-screen Menu Controls –DVD & HD BRIGHTNESS CONTRAST SHARPNESS COLOR BLACK LEVEL PICTURE RESET PICTURE Sub-Menu Main-Menu Adjusts the overall image and background screen brightness. Press + button to increase brightness. Press - button to decrease brightness.
24 On-screen Menu Controls –DVD & HD continued LANGUAGE OSM TIME OFF TIMER SCREEN SA VER CONFIGURA TION RESET PIP SIZE PIP AUDIO PIP RESET PIP SIZE PIP AUDIO PIP RESET PIP SIZE LARGE MIDDLE SMALL Sub-Menu Main-Menu Selecting the size of picture inserted at the 'Picture-in Picture' (PIP) mode.
25 On-screen Menu Controls –AV Input BRIGHTNESS CONTRAST SHARPNESS TINT COLOR BLACK LEVEL NOISE REDUCTION PICTURE RESET PICTURE Sub-Menu Main-Menu Adjusts the overall image and background screen brightness. Press + button to increase brightness. Press - button to decrease brightness.
26 On-screen Menu Controls –AV Input continued PIP SIZE PIP AUDIO PIP RESET PIP SIZE PIP AUDIO PIP RESET PIP SIZE LARGE MIDDLE SMALL Sub-Menu Main-Menu Selecting the size of picture inserted at the 'Picture-in Picture' (PIP) mode. 'Large', 'Middle', and 'Small' are available.
27 On-screen Menu Controls –AV Input continued COLOR SYSTEM CONFIGURA TION RESET CONFIGURATION RESET NO YES : SEL EXIT :PRE MENU :END Selecting the Configuration Reset allows you to reset all configuration settings to the factory default position. Select 'Yes' and press 'SET' button to restore the factory presets.
28 Using the LCD w ith a Pers onal Computer (PC) This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer a.
29 Using the LCD w ith a Pers onal Computer –continued [Example] Turn the power ON ( ' ' is for ASCII code) 4) Operation commands The operation commands execute the basic operation setting of this LCD monitor .
30 30” diagonal screen size adds a new option to information display visual offerings. 1280 x 768 resolution allows for crisp text and precise images. No permanent phosphor image burn-in contributes to optimal screen performance and longer monitor life.
31 Tr oublesho oting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position.
32 Re fe re nce s Mitsubishi 30” LCD Monitor Customer Ser vice & Suppor t Customer Service and Technical Support: (888) 307-0309 Fax: (949) 859-4770 Parts and Accessories/Macintosh Cable Adapter: (888) 307-0309 Customer Service Policies & Processes: http://www.
33 Sp ec if ic ations LCD Module External speaker output inpedance Frequency (PC Input) Pixel Clock Viewable Size Input Signal Power Supply Operational Environment Storage Environment Dimension Weight.
34 Limite d Warr ant y (Applicable only for Customers who bought and used their products within US Territories) 1. Subject to the terms and conditions in this limited warranty , MITSUBISHI DIGIT AL ELECTRONICS AMERICA, INC.
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of Mitsubishi Digital Electronics America .
デバイスMitsubishi MLM400の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Mitsubishi MLM400をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはMitsubishi MLM400の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Mitsubishi MLM400の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Mitsubishi MLM400で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Mitsubishi MLM400を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はMitsubishi MLM400の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Mitsubishi MLM400に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちMitsubishi MLM400デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。