Omron Healthcareメーカー7300Wの使用説明書/サービス説明書
ページ先へ移動 of 42
W omen ’ s Adv anced Automa tic Blood Pressur e Monitor with T wo C uffs Model Elite 7300W INSTRUCTION MANU AL ESP AÑOL ENGLISH HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 1.
2 Before Using the Monitor Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Safety Infor mation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Thank you for purchasing the Omron ® Elite 7300W IntelliSense ® W omen’ s Advanced Automatic Blood Pressure Monitor . INTRODUCTION Fill in for future referenc e.
4 T o assure the corr ect use of the product basic saf ety measur es should always be f ollow ed including the w arnings and cautions listed in this instruction manual. W ARNING Indicates a potentially hazardous situation which, if not a voided , could result in death or serious injury .
OPERA TING THE DEVICE (continued) This device is intended for use in measuring b lood pressure and pulse rate in the adult population. Do not use this device on infants or persons who cannot e xpress their intentions. Inflating to a higher pressure ma y result in bruising where the cuff is applied.
CARE AND MAINTENANCE Do not subject the monitor to strong shocks, such as dropping the unit on the floor . Do not submerge the de vice or any of the components in w ater . Store the device and the components in a clean, safe location. Changes or modif ication not approv ed by Omron Healthcare will v oid the user warranty .
7 BEFORE T AKING A MEASUREMENT T o ensure a reliable reading follo w these recommendations: 1. A void eating, drinking alcohol, smoking, ex ercising, and bathing for 30 minutes before taking a measurement. Rest for at least 15 minutes before taking the measurement.
8 KNOW Y OUR UNIT Main Unit: Operating Instructions Battery Compar tment Memor y Button ( ) Display Date/Time Setting Button ( ) Air Jack Start/Stop Button HEM-7300 e-s r2.
KNOW Y OUR UNIT 9 Componen ts: Arm Cuffs Air T ube Air Plug (Connects to Air Jack) Stylish Zipper Case F our “ AAA ” Batteries Instruction Manual Women’ s Advanced Automatic Blood Pressure Monit.
10 UNIT DISPLA Y Movement Error Symbol Low Battery Indicator Deflation Symbol Heartbeat Symbol/ Hypertension Indicator Irregular Heartbeat Symbol Av erage V alue Symbol Memory Symbol Pulse Display Medication Symbol Date/Time Display Guest Symbol Systolic Blood Pr essure Diastolic Blood Pressure HEM-7300 e-s r2.
11 IRREGULAR HEAR TBEA T SYMBOL () When the monitor detects an ir regular rh ythm two or more times during the measurement, the Ir regular Heartbeat Symbol ( ) will appear on the displa y with the measurement values.
HEAR TBEA T SYMBOL/HYPER TENSION INDICA TOR () T AKING A MEASUREMENT The Heartbeat Symbol ( ) flashes on the displa y during the measurement. The Hear tbeat Symbol ( ) flashes at e very heartbeat.
The American Hear t Association recommends the follo wing guideline for upper limit of normal for home blood pressure readings: AHA Home Guideline for Upper Limit of Normal BP Systolic Blood Pressure 135 mmHg Diastolic Blood Pressure 85 mmHg This is a general guideline because blood pressure depends on age and morbidity .
1. Press the indicator on the battery cov er and slide the co ver of f in the direction of the ar ro w . 2. Install 4 “ AAA” size batteries so the + (positiv e) and – (negati ve) polarities match the polarities of the battery compar tment as indicated.
BA TTER Y REPLACEMENT When the Lo w Battery Indicator appears on the display screen, turn the monitor off and remo ve all the batteries. Replace with four ne w batteries at the same time. W ARNING If battery fluid should get in your ey es, immediately rinse with plenty of clean water .
16 Set the monitor to the cur rent date and time before taking a measurement for the f irst time. If the date and time are not set cor rectly , the measurement values stored in the memory and the a verage v alues ma y not be cor rect. The Blood Pressure Monitor automatically stores up to 84 indi vidual measurements values with the dates and times.
SET TING THE DA TE AND TIME 2. SETTING THE YEAR The year can be set betw een 2008 and 2030. When the displa y reaches 2030, it will return to 2008. Press the Memory button ( ) to advance b y increments of one year . Press the Date/T ime Setting button ( ) to set the cur rent year .
18 4. SETTING THE DA Y Press the Memory button ( ) to advance b y increments of one day . Press the Date/T ime Setting button ( ) to set the cur rent da y . The hour flashes on the displa y . 5. SETTING THE HOUR The time is set using AM or PM. Press the Memory button ( ) to advance b y increments of one hour.
RESETTING THE DA TE AND TIME T o adjust the date or time after it has been setup when y ou f irst use the unit. Start with the monitor in the off position. 1. Press and hold the Date/T ime Setting button ( ). The Medication Symbol ( ) No.1 and the current setting ( on or oFF ) will appear on the displa y .
The Medication Reminder Alar m can be set to sound twice a da y to aler t the user to take a medication. The Medication Reminder Alarm can be set for either AM or PM aler ts. Only set the Medication Reminder Alarm after the date and time has been set.
2. SETTING ON OR OFF Press the Memory button ( ) to select on. Press the Date/T ime Setting button ( ). The hour flashes on the displa y . NO TE: Press the Memor y button ( ) to alternate between on or oFF . 3. SETTING THE HOUR The time is set using AM or PM.
4. SETTING THE MINUTE Press the Memory button ( ) to advance b y increments of one minute. Press the Date/T ime Setting button ( ) to set the minute. The Medication Symbol ( ) No.2 and the oFF setting appears on the displa y . 5. SETTING THE MEDICA TION REMINDER ALARM 2 Repeat steps from 2 to 4 to set the Medication Reminder Alarm 2.
6. TO TURN THE MONITOR OFF If the date and time are cor rect, press the ST AR T/ST OP button to turn the monitor off. T o change the date and time refer to “Resetting the Date and Time” on page 19.
CAUTION Read all of the information in the instr uction manual and any other literature in the box before operating the unit. CAUTION This device is intended for use in measuring b lood pressure and pulse rate in the adult population. Do not use this device on infants or persons who cannot e xpress their intentions.
2. Fit the looped Cuf f Guide on your upper arm. 3. Cuff Guide sho ws your correct cuff. Use the cuff with same colored stick er . APPL YING THE CUFF ON THE LEFT ARM 1. Make sure the air plug is securel y inserted in the main unit. APPL YING THE ARM CUFF 25 Use the Standard Cuff Orange Purple Use the Large Cuff HEM-7300 e-s r2.
26 2. Remo ve tight-f itting clothing from your upper left arm. 3. Apply the cuff to y our left upper arm so the blue arrow is centered on the inside of your arm and aligned with your middle f inger . The air tube runs down the inside of y our arm. The bottom of the cuff should be approximatel y 1/2" abo ve y our elbo w .
27 APPL YING THE ARM CUFF APPL YING THE CUFF ON THE RIGHT ARM When taking a measurement using the right arm use this instr uction for Step 3 on page 26. Apply the cuf f to your right upper ar m so the b lue ar ro w and the air tube runs along the inside of your elbo w .
1. Sit in a chair with your feet flat on the floor . Place your left arm on a table so the cuf f is le vel with your heart. 2. Press the ST AR T/ST OP button. All symbols appear on the displa y . The cuff starts to inflate automaticall y . As the cuff inflates, the monitor automatically determines your ideal inflation le vel.
3. When the measurement is complete, the ar m cuf f completely deflates. Y our blood pressure and pulse rate are displa yed. 4. Press the ST AR T/ST OP button to turn the monitor off. NO TE: The monitor will automatically turn off after tw o minutes. T AKING A MEASUREMENT 29 HEM-7300 e-s r2.
USING THE GUEST MODE The monitor is designed to take measurements and store the measurement values in the memory for one person. The monitor can also be used to take a single measurement for other persons using the GUEST Mode. Measurements taken using the Guest Mode are not stored in the memory .
Every time you complete a measurement the monitor stores the b lood pressure and pulse rate in the memory . The monitor automatically stores up to 84 sets of measurement v alues (blood pressure and pulse rate). When 84 sets of measurement v alues are stored , the oldest record is deleted to sav e the most recent values.
2. Press the Memory button ( ) to displa y the most recent set of measurement values on the screen. The values are displa yed from the most recent to the oldest. NO TE: The date and time are alternately displa yed with the measurement values. Press the Memory button ( ) to displa y the next set of v alues.
TO DELETE ALL V ALUES STORED IN THE MEMOR Y Y ou cannot par tially delete v alues stored in the memory . 1. Press the Memory button ( ) to turn the monitor on. 2. Press the Memory button ( ) again. While holding it do wn, press the ST AR T/ST OP button together for more than 5 seconds.
34 T o keep your digital blood pr essur e monitor in the best condition and pr otect the unit fr om damage, f ollow the dir ections listed below: Keep the monitor in the Stylish Zipper Case when not in use. Do not forcefully bend the arm cuff or air tube.
Use the unit consistent with the instruction provided in this manual. CAUTION Changes or modif ication not approv ed by Omron Healthcare will void the user w arranty . Do not disassemble or attempt to repair the unit or components. CAUTION Use only Omron authorized parts and accessories.
Contact your OMR ON distributor or Customer Services as mentioned on the package. A malfunction has occured. 36 SYMBOL CA USE C ORRECTION Remo ve the arm cuff. Read , “T aking a Measurement”. T ake another measurement. Cuff o ver-inflated T ake another measurement and remain still until the measurement is complete.
37 ERROR INDIC A T ORS AND TROUBLESHOOTING TIPS PROBLEM CA USES AND SOLUTIONS No po w er . No displa y appears on the unit. Replace all four batteries with new ones. Check the battery installation for proper placement of the battery polarities. Measurement values appear too high or too lo w .
38 FC C ST A TEMENT NO TE: PO TENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U .S.A. only) This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to pro vide reasonable protection against harmful interference in a residential installation.
W ARRANT Y 39 Y our Omron ® Elite 7300W IntelliSense ® W omen’ s Advanced Automatic Blood Pressure Monitor , excluding the arm cuffs, is w ar ranted to be free from defects in materials and w orkmanship appearing within 5 years from the date of purchase, when used in accordance with the instructions pro vided with the monitor .
40 Model: Elite 7300W Displa y: LCD Digital Displa y Measurement Range: Pressure: 0 to 299 mmHg, Pulse: 40 to 180/min. Accuracy/Calibration: Pressure: ±3mmHg or 2% of reading Pulse: ±5% of reading I.
Memory: Up to 84 readings Contents: Main Unit, Standard and Large Ar m Cuf fs, Instruction Manual, 4 “ AAA” batteries, Stylish Zipper Case, Quick Guide, W ar ranty Card and Cuff Guide UPC Code: 0 73796 73000 0 NO TE: These specifications are subject to change without notice.
Manufactured by OMR ON HEAL THCARE Made in China Distributed by: OMRON HEAL THCARE, INC. 1200 Lakeside Dri ve Bannockburn, Illinois 60015 www .omronhealthcare.
デバイスOmron Healthcare 7300Wの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Omron Healthcare 7300Wをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOmron Healthcare 7300Wの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Omron Healthcare 7300Wの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Omron Healthcare 7300Wで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Omron Healthcare 7300Wを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOmron Healthcare 7300Wの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Omron Healthcare 7300Wに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOmron Healthcare 7300Wデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
