Orionメーカー10DTの使用説明書/サービス説明書
ページ先へ移動 of 44
MODEL : 10DT Instruction manual Before operating the unit, please read this manual thoroughly. Combination 10” TV and D VD Video Pla y er TELETEXT Region 4 discs only.
IMPOR T ANT Unauthorized recording of copyright television programmes, films, video tapes and other materials may infringe on the rights of copyright owners and be contrary to copyright laws. W ARNING To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
1 FEA TURES CONTENTS PREPARATION PRECAUTIONS ......................................................... 2 LOCATION OF CONTROLS ...................................... 3 REMOTE CONTROL ................................................. 4 AERIAL CONNECTIONS/POWER SOURCES .
2 Keep the unit away from flower vases, sink etc. Liquids spilled into the unit can cause serious damages. Switch OFF the Power Supply to the unit and consult a qualified service engineer before attempting to use the unit again. When you leave your home for a long period of time, unplug the AC mains lead.
3 LOCA TION OF CONTR OLS Front Rear VIDEO/AUDIO IN (L/R) jacks (A V2) CHANNEL ▲ / ▼ buttons Phones socket Disc tray STAND BY ( ) Indicator Sub Power ( ) button VOLUME ▲ / ▼ buttons ST OP butto.
4 Sub P ower on/off 6,13,21,23 DISPLA Y Display TV or D VD operation status 14,21 TV/DVD Select to operate TV or D VD 8,9,13,21,22 OPEN/CLOSE Open or Close the tray 23,34 0-9 Direct channel selection .
5 REMOTE CONTROL Open the battery compart- ment cover in the direction of the arrow. Install two “AAA/R03/UM-4” (penlight size) batteries, paying attention to the polarity diagram in the battery compartment. Replace the cover. BATTERY INSTALLATION • Use two “AAA/R03/UM-4” size penlight batteries for the remote control transmitter.
6 OUTPUT • SORTIE RF IN ON OFF MAIN POWER SCART PRISE PERITEL COAXIAL DIGITAL A UDIO ANALOGUE AUDIO L(G) R(D) Connect an indoor or outdoor aerial to the aerial socket at the rear panel as shown below. For all aerial circuit problems, please consult your local dealer.
7 OUTPUT • SORTIE RF IN ON OFF MAIN POWER SCART PRISE PERITEL COAXIAL DIGIT AL AUDIO ANALOGUE AUDIO L(G) R(D) OUTPUT • SORTIE RF IN ON OFF MAIN POWER SCART PRISE PERITEL COAXIAL DIGIT AL A UDIO AN.
8 AV1 I nput Selection If you connect the unit to a VCR, camcorder or games console, you can select this input by pressing the AV button. 3. To connect the TV to a camcorder Connect the camcorder to the unit as shown. Press the AV button to select AV2 to use the TV as a monitor.
9 LANGUAGE SETTING This unit has 5 different languages for MENU set up which can be selected through ON Screen Display: English, German, French, Italian or Spanish.
10 AUTOMATIC TUNING PRESETTING THE CHANNELS - Automatic tuning The stations will be preset in the order that they appear when the automatic tuning is activated. - Manual tuning In this mode the TV searches until a picture appears. If it is a station that you want to keep, you can choose which channel preset you want to store it on.
11 PRESETTING THE CHANNELS SELECT/ ENTER TV/DVD VOLUME OPEN/CLOSE DISPLA Y AV CH/P AGE CH/P AGE MUTE RETURN SETUP/ MENU AUDIO CANCEL ANGLE TITLE TEXT/MIX/TV SLEEP Q UICK VIEW/ZOOM PLA Y MODE SLOW PA U.
12 PRESETTING THE CHANNELS TO CHANGE THE CHANNELS EXAMPLE: Changing of channel position from CH2 and CH5. 1 Press SETUP/MENU . Press or to select the CHANNEL SETUP mode, then press SELECT/ENTER . AV COLOUR PAL PICTURE LANGUAGE MENU PRESS: ▲ / ▼ / ENTER / MENU CHANNEL SETUP Press or to select the CH ALLOCATION mode, then press SELECT/ENTER .
13 TV OPERA TIONS 1 Press Main POWER on the unit’s rear panel. Then press STAND BY ( ) on the remote control to turn on (STAND BY indication will goes off).
14 CONVENIENT FUNCTIONS The following functions are available from the remote control handset only. SELECT/ ENTER TV/DVD VOLUME OPEN/CLOSE DISPLA Y AV CH/P AGE CH/P AGE MUTE RETURN SETUP/ MENU AUDIO C.
15 PICTURE ADJUSTMENTS 1 Press SETUP/MENU . AV COLOUR PAL LANGUAGE MENU PRESS: ▲ / ▼ / ENTER / MENU CHANNEL SETUP PICTURE SELECT/ ENTER TV/DVD VOLUME OPEN/CLOSE DISPLA Y AV CH/P AGE CH/P AGE MUTE .
16 AV COLOUR ADJUSTING 1 Press SETUP/MENU on your remote control. The on screen display will appear. Press ▲ or ▼ to select the AV COLOUR menu. When connecting external equipment to the unit, the picture may become black and white. This can be corrected by selecting AV (Extension) Colour as follows.
17 RECEPTION OF INTERFERENCE The most common types of television interference are as follows. IGNITION Black spots and horizontal streaks may appear, the picture may flutter or drift. This is usually caused by interference from car ignition system, neon lamps, electric drills or other electrical appliances.
18 TELETEXT Most broadcasting stations off er a T eletext service in addition to their standard TV program. T eletext off ers news, weather f orecast, winning Lotto numbers, TV listings and other interesting news . The te xt is received page b y page, as soon as you select the broadcasting station.
19 To call a teletext page Leaf through the pages with the PA GE ( M M M M M / ? ? ? ? ? ) - b utton (f orward or backward). Note: Y ou will not necessarily find a page for e ver y page number y ou enter . E.g. you ha ve entered page no . 116 but it does not off er this page.
20 DISC DVD discs must be Region 4 type to play on this unit. The loaded Disc (D VD and A udio-CD) will be recognized automatically . The suitable disc f or mats are: D VD-Video , CD , CD-R and CD-RW .
21 PREP ARA TION/ST A TUS DISPLA Y OF DISC NOTE: If the unit does not operate properly: Static electricity can adversely aff ect the operation of this pla yer . Sometimes this can be remedied by unplugging the unit for a short time, then reconnecting it.
22 /Enter/Setup/Return OSD Language Francais Espanol Deutsch Italiano English SETTING LANGUAGE You can change the default settings to customise performance to your preference. Main Menu /Enter/Setup/Return Language Picture Sound P arental 1 Press TV/DVD to select DVD mode.
23 6 PLA YB A CK PR OCEDURE Press OPEN/CLOSE or PLA Y . The disc tray closes auto- matically . The TV -screen, changes to “ ” and then playback commences. • A menu screen will appear on the TV screen, if the disc has a menu feature. 1 Press OPEN/CLOSE on the unit or the remote con- trol.
24 SPECIAL PLA YB A CK Press SEARCH during normal playback. Each press of the SEARCH button will increase the speed of the search (x 2), (x 4), (x 8), (x 15). (CD: (x 2), (x 4), (x 8), (x 20)) • To resume normal playback, press PLAY . Fast Forward Playback Press SEARCH during normal playback.
25 Jump 0:00:00 / 2:02:31 1 / 8 _ _ / 19 /Enter/0 9/Cancel/Jump T C 1 NOTES: •Y ou can select the P ause, Slow or Search playback in the zoom mode. • Some discs may not respond to zoom feature. ZOOMING/LOCA TING DESIRED SCENE This unit will allow you to zoom in on the frame image.
26 A AB NOTES: • Some discs may not work with the repeat operation. • In Repeat A-B mode, subtitles near point A or B ma y not appear. •Y ou ma y not be able to set Repeat A-B , depending on the scenes of the D VD . REPEA T/RANDOM/PROGRAM PLA YB A CK AND REPEA T A-B Press PLAY MODE during playback or stop mode.
27 MARKING DESIRED SCENES The unit stores the points that you want to watch again. You can resume playback from that scene. 1 Press MARKER during playback. Marking the Scenes 2 Select the blank Marker using / , then press SELECT/ENTER at the desired scene.
28 1/32 Eng Off 1/8 Eng Dolby Digital 2/8 F ra Dolby Digital Subtitles T urning the Subtitles On and Off When playing back a disc recorded with subtitles, you can turn the subtitles on or off. Press SUB TITLE during play- back until “Off ” appears.
29 1/9 CHANGING ANGLES/TITLE SELECTION/D VD MENU When playing back a disc recorded with multi-angle facil- ity, you can change the view angle. 1 Press ANGLE during play- back. The current angle will ap- pear . 2 Press ANGLE repeatedly until the desired angle is selected.
30 1 Press SETUP/MENU in the stop mode or No Disc. Press or to select “Picture”, then press or SELECT/ENTER . 2 Press or to select “TV Screen”, then press or SELECT/ENTER . 3 Press or to select your desired screen type, then press SELECT/ ENTER .
31 /Enter/Setup/Return Sound DRC On Main Menu /Enter/Setup/Return Language Picture Sound P arental /Enter/Setup/Return Sound DRC Off DYNAMIC RANGE CONTROL 1 Press SETUP/MENU in the stop mode. Press or to select “Sound”. 2 Press or SELECT/ ENTER to select “DRC”.
32 P arental P assword Off P arental Level Off P assword P assword 1234 /Enter/Setup/Return Main Menu Language Picture Sound P arental PARENT AL CONTR OL SETTING Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit.
33 TO CHANGE THE P ARENT AL LEVEL 1 Press SETUP/MENU in the stop mode or No Disc. Press or to select “Parental”, then press or SELECT/ENTER . 2 Press or to select “P assword”, then press or SELECT/ENTER . 3 Press number buttons (0–9) to enter the password you have stored.
34 TEMPORAR Y DISABLING OF RA TING LEVEL BY D VD DISC 1 Load a DVD disc and press PLA Y (see page 23). 2 If the DVD disc has been designed to temporarily cancel the Rating level, the screen which appears after inserting a DVD will change, depending on which disc is played.
35 LANGUAGE CODE LIST Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or “MENU LANGUAGE” (see page 22). Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese .
36 BEFORE REQUESTING SER VICE If your unit does not work properly check the following before calling a service engineer. 6 6 CAUSE SYMPTOMS SOLUTION PAGE POWER No power. The Mains lead is not connected. Main power (ON) switch is OFF. The DC car cord is not plugged into the cigarette lighter socket.
37 TELEVISION Picture Tube: Television System: Tuner: Receiving Channels: Aerial Input: Audio Output Power: Speaker: DVD Signal system: Applicable disc: Audio characteristics: Frequency response: S/N .
03/08 K ORION ELECTRIC CO ., L TD . (J AP AN).
Quick Set-up Sheet for MODEL : 10DT 1 To use DC POWER 1. Connect the supplied car cord to the DC 12 V input jack. 2. Start the car engine and insert the other end of the DC Power cord into a cigarette lighter socket of your car. Then the STAND BY( ) indicator will light up.
OUTPUT • SORTIE RF IN ON OFF MAIN POWER SCART PRISE PERITEL COAXIAL DIGITAL A UDIO ANALOGUE A UDIO L(G) R(D) 2 On-screen language selection Press SETUP/MENU . If you press SETUP/MENU for the first time, the language setting menu will appear. 2 Press or to select the desired language.
Press SETUP/MENU . Press or to select CHANNEL SETUP. Then press SELECT/ENTER . Channel preset 2 Press or to select AUTO . 3 Then press SELECT/ENTER . The auto search starts and all channels are stored automatically, in the order that they are found.
Depending on the D VD , the start-up sequence will v ar y . Some D VDs indicate a menu screen. Press / or / to select the menu. Then press SELECT/ENTER to confirm the selection. Setting Setup language for DVD 4 J5G90407A K Press SETUP/MENU repeatedly until normal TV screen appears.
デバイスOrion 10DTの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Orion 10DTをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはOrion 10DTの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Orion 10DTの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Orion 10DTで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Orion 10DTを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はOrion 10DTの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Orion 10DTに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちOrion 10DTデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。