PanasonicメーカーKX-PW100CLの使用説明書/サービス説明書
ページ先へ移動 of 24
Facsimile with Cordless Phone Quick Reference Guide KX-PW100CL Model No. T able of Contents Finding the controls …………………………………………………………… 2 Installations a.
2 Finding the controls Main unit (control panel) Liquid crystal display Redial button Start/Copy button starts faxing or copying. Select button Edit button T one button switches to tone dialing.
Finding the controls 3 Switch ON : The environs of lights on OFF : The environs of lights off Portable handset Battery charger K X - FKN100-W FKN100-W メニュー 留 守 ● To adjust the volume. ● To change Hiragana into Kanji. ● To redial the last number dialed.
4 Installations and connections Installing the ink film 2 Insert the ink film. Insert the white core into the slots shown in the picture below. 1 Open the control panel. Find the “ T ” shaped gear (blue). 1 Ink film Insert the blue core into the right slot of the main unit.
5 Installations and connections Installing recording paper (A4 size) 1 Install the recording paper tray. Insert the left tab on the recording paper tray into the left slot of the main unit. Insert the right tab into the right slot of the main unit. 2 1 3 Close the paper entrance cover by leaning it back.
Installations and connections 3 Charge the battery in the charger for 10 hours. Plug Charger AC adaptor P o wer outlet (A C 100 V) Battery Battery cover Black Red Click Connector Setting up the portable handset 1 2 ● After your Panasonic battery is fully charged, it will last up to about 7 hours of conversation.
Connecting the main unit Installations and connections P ow er cord T elephone line cord W all jack P ow er outlet AC 100V 1 Raise the antenna. 2 Connect the telephone line cord (Supplied accessory). 3 Connect the power cord. ( 電話回線へ ) 回 線 電 話 機 停 電 用 Click After the Power On.
8 Setting the date and time 1 Press . 1 Press . 2 Press (Search button) repeatedly until the following is displayed. 4 Enter the correct year/month/day. Example: May 1, 2002 Press . 2 Press (Search button) repeatedly until the following is displayed. 5 Enter your facsimile telephone number, up to 20 digits.
9 1 Press . 2 Press (Search button) repeatedly until the following is displayed. 5 Enter your logo, up to 30 characters, using the dial keypad. ● To enter English characters easily, press (Character input mode) repeatedly and select “ 英 ” (English and sign input mode).
10 Character input and command key table 、 、。 、。 “ かな ” Hiragana “ 英 ” English “ カナ ” Katakana “ 数 ” Numbers !？ / ー # ‚ ;: ｜ ・ ’” （） [] ｛｝ .
Automatic dialing on the main unit Storing names and telephone numbers in the phonebook Making a voice call using the phonebook 1 Press (Phonebook). 2 Press (Search button) repeatedly until the desired name is displayed. 3 Enter the name, up to 20 characters (see the table on page 10 for instructions).
Automatic dialing on the portable handset Storing names and telephone numbers in the phonebook Making a voice call using the phonebook 2 Press (Register). ● “XXX” shows the remaining station numbers you can store. ● You can program up to 150 stations, including 4 pre- programmed stations.
13 Sending faxes 1 Open the control panel cover, and adjust the width of the document guides to the size of the document. 2 Insert the document (up to 5 pages) FACE DOWN until a single beep is heard. 3 If necessary, press repeatedly to select the desired setting (see below).
2 When receiving a call, the unit will receive a fax document or record a voice message automatically depending on the caller ’ s request. light on Receiving a fax automatically (AUT O ANSWER on) 1 If the light is off, turn it on by pressing .
15 Receiving faxes Microphone Recording your own greeting message You can record your own greeting message. When receiving a call, it will be played to callers instead of the pre-recorded Japanese greeting message. 1 Press . 3 Press . 5 Press . 6 Press and record your greeting message, up to 16 seconds, to the microphone.
16 Operating the built-in answering device 2 When receiving a call, a greeting message will be played and the unit will record a voice message. ● To record your own greeting message, see page 15. light on/flash Activating the answering device 1 Turn the light on by pressing .
Operating the built-in answering device Operating the answering device from a remote location Preparation: Programming the remote operation ID 1. Press . 2. P ress (Search button) repeatedly until the following is displayed. 3. Press . 4. Enter any 4-digit number (remote operation ID) except or #.
18 Individual e-mail services Using the e-mail services Kyushu Matsushita Electric Co., Ltd. (hereafter called “KME”) offers individual information services, such as e-mail.
19 Individual e-mail services Subscribing to KME information services ● Please save the address and ID code for future reference. 11 After approx. 5 minutes, the unit will ring, and a data communication will start automatically between your unit and KME.
20 Note: ● You can hear a voice in WAV format only. ● Voice data will be saved for 1 week in the server after the e-mail has been received. Example of received e-mail document. Individual e-mail services Receiving and printing an e-mail 2 Press . ● If there is an e-mail you have not viewed yet, the unit will print the received e-mail.
21 Individual e-mail services 1 Press , then press . 2 Press (Search button) repeatedly until the following is displayed. Sending a text e-mail from the main unit 3 Press . 5 Press . ● The display will show the last title you entered. To delete this title, press for 2 or more seconds.
22 Individual e-mail services Microphone Sending a voice e-mail 9 Press (Speakerphone) to finish recording. 7 Press . ● An announcement about how to record will be heard. 8 Record your voice message up to 60 seconds, following voice guidance, using the microphone.
23 Individual e-mail services 7 Enter the e-mail address, up to 60 characters (see the table on page 10 for instructions). Storing another party’ s e-mail address in the search button 5 Enter the name, up to 20 characters (see the table on page 10 for instructions).
KX-PW100CL Main unit PFQX1753ZA SK0402KM Specifications © Kyushu Matsushita Electric Co., Ltd. 2002 Main unit Applicable line Public Switch Telephone Network (Tone/Pulse), F-Net, NCC Lines 320 Ω (*2) G3 compatible B4-A5(Max.257 mm in width, Max. 800 mm in length) 252 mm (B4) 208 mm (A4) 202 mm (A4 size plain paper) Approx.
デバイスPanasonic KX-PW100CLの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Panasonic KX-PW100CLをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPanasonic KX-PW100CLの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Panasonic KX-PW100CLの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Panasonic KX-PW100CLで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Panasonic KX-PW100CLを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPanasonic KX-PW100CLの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Panasonic KX-PW100CLに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPanasonic KX-PW100CLデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
