Pelcoメーカーcm6800-322x6の使用説明書/サービス説明書
ページ先へ移動 of 80
CM6800-32X6 Matrix Switcher C1522M-C (2/05) ® INST ALLA TION/OPERA TION.
2 C1522M-C (2/05) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND W ARNINGS .............................................................................................. .................................................................... 6 DESCRIPTION .
C1522M-C (2/05) 3 OPERA TION ........................................................................................................................................................................................................................ 55 OVERVIEW .
4 C1522M-C (2/05) LIST OF ILLUSTRA TIONS Figure Page 1 Sample CM6800-32X6 System ..................................................................................................... ................................................................... 7 2 Installing Rack Ears .
C1522M-C (2/05) 5 LIST OF T ABLES T able Page AV ideo Coaxial Cable Requirements .............................................................................................. ................................................................... 12 B Communication Port Devices and Wiring .
6 C1522M-C (2/05) This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and mainte- nance instructions in the literature accompanying this unit.
C1522M-C (2/05) 7 DESCRIPTION Pelco’ s CM6800 Matrix Switcher/Controller is a cross-point video matrix switcher . The CM6800-32X6 provides switching and control for 32 video inputs and six monitor outputs from any one of up to 10 keyboards, PCs, and other devices.
8 C1522M-C (2/05) Programming The CM6800 features easy programming through on-screen menus or the Windows ® -based CM6800-MGR software package. All programming is password-protected . Programming menus are provided in English, French, German, Italian, Polish, Portuguese, Russian, and Spanish.
C1522M-C (2/05) 9 System Access and Priority The CM6800 provides the following ways to restrict system access: • Camera to Monitor: Cameras can be assigned to specific monitors for viewing. • Keyboard to Monitor: Keyboards can be assigned to control specific monitors.
10 C1522M-C (2/05) MODELS CM6800-32X6 Matrix switcher/controller with 32 video inputs and 6 monitor outputs, NTSC configured 120/230 V , 50/60 Hz, autoranging CM6800-32X6-X Matrix switcher/controller .
C1522M-C (2/05) 11 INST ALLA TION Unpack and inspect all parts carefully . The following parts are supplied: 1 CM6800 Switcher/Controller 4 10-32 x .750-inch pan head screws 4 .500” OD nylon washers 1 Power cord 2 6-foot (1.8 m) straight data cables with RJ-45 connectors 1 6-foot (1.
12 C1522M-C (2/05) VIDEO SOURCES The CM6800-32X6 offers 32 full-function video inputs which support Coaxitron PTZ control and video loss detection. The video inputs can be used for looping video connections with terminating and unterminating switches on the back panel.
C1522M-C (2/05) 13 2. Set the terminating switches according to your system requirements. Te r minating switches are used to terminate or unterminate the video input. The factory default has the switches set in the terminated (75-ohm) position. If you are connecting only a camera to an input, leave the switch in the terminated position.
14 C1522M-C (2/05) CONTROL LINES Y ou cannot connect a Coaxitron camera to the PTZ port. If your video sources are all controlled by Coaxitron, skip this section .
C1522M-C (2/05) 15 MONITORS The CM6800-32X6 supports six monitors. 1. Install monitors according to the instructions provided with them. 2. Connect the monitor cables at the appropriate video output BNC receptacles on the back of the CM6800. 3. T erminate cables at the monitors.
16 C1522M-C (2/05) ALARMS The CM6800 provides numerous alarm handling options. Refer to the Programming section for a detailed description. 1. Connect wires from the sensors to the respective alarm input points on the connectors at the back of the CM6800.
C1522M-C (2/05) 17 CONNECTING DEVICES THROUGH THE COMMUNICA TION PORTS The CM6800-32X6 Matrix Switcher/Controller provides five communication ports on the rear panel for connecting peripheral components. Instructions are provided in this section for the most commonly used connections.
18 C1522M-C (2/05) Table C. Default Port Settings Port Default Settings COM 1 MGR, RS-232, 56000 baud, no parity , 8 data bits, 1 stop bit COM 2 ASCII, RS-232, 9600 baud, no parity , 8 data bits, 1 st.
C1522M-C (2/05) 19 KBD100, KBD200A, AND KBD300A SERIES KEYBOARDS Y ou can connect up to eight KBD100/200A/300A Series keyboards to either of the following ports: • COM 4 (up to 8 remotely connected .
20 C1522M-C (2/05) 3. Set the keyboard DIP switches for the desired address for the local keyboard (refer to Figure 12 and T able D). Table D. Keyboard Addresses: KBD100/200A/300A Series Keyboards Swi.
C1522M-C (2/05) 21 KBD100, KBD200A, AND KBD300A: REMOTE KEYBOARDS Use COM 4 or 5 for remote keyboard connections. Each port can support up to eight KBD100/200A/300A Series keyboards. Do not exceed a total capacity of eight keyboards connected to the CM6800-32X6.
22 C1522M-C (2/05) M DEVICES M protocol devices (KBD960/KBR960 keyboards, ALM2064 Alarm Interface Units, and REL2064 Relay Interface Units) can be connected to COM 3 on the CM6800-32X6. If only one device is to be connected to COM 3, use the instructions for that device in the following sections.
C1522M-C (2/05) 23 Connecting a Single KBD960/KBR960 Keyboard To connect a single KBD960/KBR960 Keyboard to the CM6800: 1. Connect the keyboard to the CM9505UPS using the straight cable supplied with the keyboard. 2. Connect the CM9505UPS to COM 3 on the CM6800-32X6 using the 6-foot (1.
24 C1522M-C (2/05) Connecting a Single ALM2064 Alarm Interface Unit To connect a single ALM2064 Alarm Interface Unit: 1. Connect the ALM2064 OUT port to COM 3 on the CM6800-32X6 using the 6-foot (1.8 m) straight data cable supplied with the CM6800. 2.
C1522M-C (2/05) 25 Multiple M Devices Multiple M devices (KBD960/KBR960, ALM2064, and REL2064) can be connected to COM 3 on the CM6800-32X6, either as local devices or remote devices (when connecting two KBD960/KBR960 keyboards to the CM6800, you must use a remote connection).
26 C1522M-C (2/05) Multiple M Devices: Remote Connection Use a remote connection when the distance from the CM6800 is greater than 6-feet (1.8 m). 1. Connect each ALM2064 and REL2064 unit to a wall block with a 6-foot (1.8 m) straight cable (supplied with the CM6800).
C1522M-C (2/05) 27 CONNECTING A PC The CM6800 provides PC-based setup and programming software that facilitates complete switcher programming and configuration. Refer to the CM6800-MGR Quick Start Guide for instructions on using the software. Connect a PC to the CM6800 to access the CM6800-MGR software or to download upgrades to the software.
28 C1522M-C (2/05) CONNECTING GENEX MUL TIPLEXERS Use COM 4 to connect up to eight Genex Multiplexers to the CM6800-32X6. 1. Connect the COM IN port of the multiplexer to COM 4 on the CM6800-32X6, using the 6-foot (1.8 m) reversed data cable supplied with the CM6800.
C1522M-C (2/05) 29 LOCAL AUXILIARIES The CM6800-32X6 provides two local auxiliary (AUX) outputs on the rear panel for controlling VCRs, printers, and other devices. These outputs can be activated directly from a keyboard by using the F1 and F2 function keys, or they can be activated by an alarm (determined by programming).
30 C1522M-C (2/05) Connecting the Open Collector output – F2 (TTL) F2 is a TTL open collector output. This output provides a path to ground to control the low voltage trigger input on many devices. It can control higher voltage control inputs via isolation relays.
C1522M-C (2/05) 31 00620 Figure 25. CM6800 Time/Date Stamp on Monitor The time stamp will be advancing in one-second increments. Wait five seconds before proceeding. INITIALIZE KEYBOARDS Specify a monitor for each keyboard after your first power -up or any time power is cycled to the keyboard or the CM6800.
32 C1522M-C (2/05) COMMUNICA TION PORTS If you are using any communication port for a device not specified by the default setting, open the Port programming screen to change the settings.
C1522M-C (2/05) 33 MONITOR COLOR ADJUSTMENT : Once you have connected all devices and powered the system, use the CM6800 color bars as a reference tool for adjusting the color on each monitor . 1. Enter 9999. 2. Press the CAM key . Broadcast quality color bars appear on the monitor .
34 C1522M-C (2/05) PROGRAMMING THE CM6800 The CM6800 is shipped from the factory with default programming settings. If the defaults are acceptable, the CM6800 can be operated without any user programming.
C1522M-C (2/05) 35 CM6800 PROGRAMMING MODE 1. If you have not already done so, select the monitor (KBD960/KBR960: if the Camera menu appears, press to exit). 2. Press the PGM key or select PGM on the KBD960/KBR960). The Password screen appears. Note that on the KBD960/KBR960, you must first select and DEF .
36 C1522M-C (2/05) Exit Programming Mode NA VIGA TE AND SELECT OPTIONS/FIELD ENTRIES IN PROGRAMMING MODE During programming, a menu appears on the monitor screen. The currently selected field blinks. Use the following keys or joystick on your keyboard to navigate the programming screens.
C1522M-C (2/05) 37 Function Scroll through options in programming fields. Select option in a programming field. Enter a numerical value in an option field (not available in all fields). Access the HELP screen (Sequences, Macros, and Alarm Group screens).
38 C1522M-C (2/05) ACCESS The CM6800 supports the following system partitioning to control switching system access: Keyboard to Monitor: Restrict a keyboard from accessing selected monitors. Camera to Keyboard: Restrict a keyboard from calling selected cameras to monitors.
C1522M-C (2/05) 39 ALARM PROGRAMMING Alarmed cameras can be displayed on one or several monitors as part of one or several alarm groups (each monitor can display only one alarm group.
40 C1522M-C (2/05) INTERNAL AND EXTERNAL ALARMS Use the Alarm Contact screens to configure alarm inputs. When an alarm is triggered, the alarm icon and the alarm letter (“I” for internal; “E” for external) appear on monitors programmed through the Alarm Group screen to display the alarm.
C1522M-C (2/05) 41 In the AUX field, select an auxiliary to be activated. GON = turn global auxiliary on GOFF = turn global auxiliary off CON = turn camera auxiliary on COFF = turn camera auxiliary off NOTE: Activate the auxiliaries on the rear panel of the CM6800 by selecting global auxiliary numbers 1 or 2.
42 C1522M-C (2/05) AUXILIARY OUTPUTS The two local auxiliary (AUX) outputs on the rear panel of the CM6800-32X6 can be operated manually from a system keyboard or automatically in response to an alarm. Figure 33. Program Auxiliary Outputs Latching or Momentary Operation In the MODE field for each auxiliary , select either LA T or MOM.
C1522M-C (2/05) 43 CAMERA PROGRAMMING Extended Coaxitron protocol receivers can be operated without any programming changes, other than changing the camera title, if necessary . For other receiver control protocols, you must select the control type for the device connected to each video input.
44 C1522M-C (2/05) PROGRAM CAMERAS PELCO SWITCHER MODEL CM6800 MAIN MENU 1 CAMERA 2 LOGICAL CAMERA 3 MONITOR 4 ACCESS 5 TIME & DA TE 6 PORT 7 PRIORITY 8 SEQUENCE 9 MACRO 10 ALARM CONT ACTS 11 EVEN.
C1522M-C (2/05) 45 4. Select the camera title. This title (up to 20 characters) appears on the monitor during real-time camera display . a. Navigate to the position in the camera title that you want to change.
46 C1522M-C (2/05) EVENT TIMERS Y ou can automate system operation to activate sequences or macros on specific monitors. Events can be scheduled on a daily or weekly basis, or on a specific date such as a holiday .
C1522M-C (2/05) 47 MACRO Macros simplify operator control by grouping multiple functions into a single command. Figure 37. Access the Macro Screen MACRO: Select the macro number you want to program. STP: Each macro can include up to 72 steps. For each step select entries for the following fields as necessary: CMD: Select a command.
48 C1522M-C (2/05) MONITOR DISPLA Y Use the Monitor screen to adjust monitor display settings for your system. Y ou can adjust settings for the current monitor only (CURRENT) or for all system monitors (ALL).
C1522M-C (2/05) 49 MON/ALM ST A TUS: Enable (ON) or disable (OFF) on-screen display of the monitor or alarm status. MONITOR ST A TUS DISPLAY V ALUES: Blank = normal status H = hold S = sequence NOTE: If an operator presses the HOLD key while an alarm appears on the monitor , the H does not appear .
50 C1522M-C (2/05) PASSWORD Use the Set Password screen to change the system password. If you change the password and then forget the new one, you will have to reset the system to the factory defaults. All system program- ming will be lost. Pelco recommends uploading your programming settings to the CM6800-MGR before changing the password.
C1522M-C (2/05) 51 PORTS (SERIAL/COM PORTS) Use the Port screen to configure the settings for each device connected to a Serial/COM port on the rear panel of the CM6800. Figure 41. Access the Port Screen 1. Select the number of the desired Serial Port/COM port (01-06).
52 C1522M-C (2/05) PRIORITY The CM6800 provides eight levels of priority control. Each level defines the ability of a keyboard to control a pan/tilt/zoom (camera positioning system) and to access programming screens.
C1522M-C (2/05) 53 SCRATCHP AD SEQUENCE MON ## STP CAM DWL CMD ## AUX ## 01 0001 02 PA TT 02 CON 001 02 0005 02 PRES 12 GOFF 101 03 0008 02 FSCN 00 CON 008 04 0012 02 RSCN 00 — — — — 000 05 00.
54 C1522M-C (2/05) TIME AND DA TE Use the T ime and Date screen to set the system time and date settings. The time and date displayed on the monitor during real-time camera display is the time set in the memory through this screen. The system time and date information is kept current in battery-backed RAM.
C1522M-C (2/05) 55 OPERA TION OVERVIEW A brief description of CM6800 operation is provided here. Refer to the following sections for detailed instructions and options. Install the CM6800E and connect Refer to the Installation section. all system devices.
56 C1522M-C (2/05) SELECT CAMERAS If you select a restricted camera view , the camera view does not appear on that monitor . The previously selected, unrestricted camera view remains on the monitor . KBD100/200A/300A KEYBOARDS KBD960/KBR960 KEYBOARDS 1.
C1522M-C (2/05) 57 OPERA TE SEQUENCES Y ou can run a scratchpad sequence from an individual monitor or a system sequence on any monitor accessible from the keyboard. When running a sequence, any cameras not accessible to the keyboard will be bypassed.
58 C1522M-C (2/05) RUN A MACRO A macro runs until the last step is completed (unless you specify a loop in the macro). ACKNOWLEDGE AN ALARM When an alarm is triggered, an alarm icon appears on the monitors programmed to show that alarm. KBD100/200A/300A KEYBOARDS 1.
C1522M-C (2/05) 59 CALL A PRESET Program the preset through the keyboard. Refer to the appropriate keyboard manual for instructions. Presets are not available with the KBD100 keyboard. KBD200A/300A KEYBOARDS 1. Enter the preset number . 2. Press the PRESET key .
60 C1522M-C (2/05) OPERA TE AUXILIARIES/RELA YS Local auxiliaries are the outputs on the rear panel of the CM6800. External auxiliaries are available by connecting an REL2064 Relay Interface Unit to the CM6800 through COM port 3.
C1522M-C (2/05) 61 CONTROL GENEX MUL TIPLEXER AND GENEX MUL TIPLEXER DISPLA YS Multiplexer control is not available with the KBD100. KBD200A/300A KEYBOARDS 1.
62 C1522M-C (2/05) Figure 46. CM6800 DIP Switches – Factory Default Settings Table G. CM6800 DIP Switch Settings CM6800 DIP Switch Default Settings Switch 1 OFF (0) = NTSC CM6800-32X6: OFF ON (1) = .
C1522M-C (2/05) 63 ALARM GROUP DISPLA Y OPTIONS To display on a monitor , an alarm must be assigned to an alarm group (A-F). Before programming alarms you may want to determine the alarm display format for each alarm group. An alarm can include up to eight steps, so eight camera views could display as a part of each alarm.
64 C1522M-C (2/05) Reverse Chronological Pair: M and L The most recent alarm of a specific group is displayed on one designated monitor , while all other alarms in the group are sequenced on the second designated monitor . All steps programmed for the alarm contact appear on the designated monitor .
C1522M-C (2/05) 65 MACRO COMMANDS T able H provides a description of each macro command and the additional fields required for each command. Refer to the Macro section for instructions on programming macros. Table H. Macro Commands Command Description Specify Field(s) GON Activate an auxiliary .
66 C1522M-C (2/05) Table H. Macro Commands (Continued) Command Description Specify Field(s) PIPO T urn off multiplexer picture-in-picture view . Multiplexer input Camera Monitor Monitor QUAD Display multiplexer four-camera mode. Camera group* Command # Multiplexer input Camera Monitor Monitor NANO Display multiplexer nine-camera mode.
C1522M-C (2/05) 67 ASCII OPERA TING COMMANDS ASCII protocol uses the ASCII character set to transmit and receive commands between an ASCII device (such as a personal computer (PC) or ASCII keyboard) and the CM6800.
68 C1522M-C (2/05) Table J. ASCII Commands Number ranges are enclosed in brackets – do not enter the brackets. When you control a fixed speed pan and tilt, omit the speed information. NOTE: In a 96 x 16 system the numbers for cameras, monitors, alarms, and relays can be doubled.
C1522M-C (2/05) 69 Table J. ASCII Commands (Continued) Desired Action Begin random scan Begin frame scan Stop scan Auxiliary on Auxiliary off Camera auxiliary on Camera auxiliary off Start macro Stop .
70 C1522M-C (2/05) TROUBLESHOOTING GAINING INITIAL CONTROL If you are having problems gaining control of your system for the first time: • Confirm that all system equipment is plugged in and has power . • Confirm that each keyboard and peripheral device in your system has a unique local address.
C1522M-C (2/05) 71 SOLUTIONS TO COMMON PROBLEMS Refer to T able K for a list of common problems and their solutions. Table K. Solutions To Common Problems Problem CM6800 does not have power . Y ou can see some cameras and not others from your location.
72 C1522M-C (2/05) KBD960/KBR960 ICON/BUTTON LEGEND Figure 49. Icon/Button Legend MUX CAMERA CONTROL SEQUENCE MENU MUX MENU SEQ MUX FORW ARD RUN BACKWARD MACRO RECALL/AL TERNA TE PRESET/LOCK FUNCTION .
C1522M-C (2/05) 73 GLOSSARY Te rm Definition Access The CM6800 allows you to restrict system control by (1) limiting the monitors or cameras a keyboard can access, or (2) limiting the cameras that can be viewed on a monitor .
74 C1522M-C (2/05) Matrix switcher This is also known as a cross-point switcher . The cross-points are actually electronic switches that select any video input onto any video output at any one time, preserving the video impedance matching. One video signal can simultaneously be selected on more than one output.
C1522M-C (2/05) 75 RS-422 This is an Electronics Industry Association (EIA) interface standard. Pelco uses this standard for communication from a controller to one or more camera receivers (on the same line); the maximum recommended distance is 4,000 feet (1,219 m).
76 C1522M-C (2/05) INDEX A Access 9 Access (partitioning) 38 Addressing KBD100/200/300 series keyboards 20 KBD960/KBR960 series keyboards 32 M devices 22 Alarms acknowledge 58 alarm contact programmin.
C1522M-C (2/05) 77 O Open collector (TTL) output 30 Operation alarms 58 auxiliaries 60 cameras 56 Genex multiplexer 61 macros 58 monitors 55 overview 55 patterns 59 presets 59 PTZ control 56 sequences.
78 C1522M-C (2/05) SPECIFICA TIONS GENERAL Memory Protection: Lithium battery , five years of data protection Keyboards: T en: Eight KBD100/200A/300A Series keyboards and two KBD960/KBR960 Series keyboards. (Switcher can provide power for one KBD100/200A/300A Series keyboard.
C1522M-C (2/05) 79 REVISION HISTORY Manual # Date Comments C1522M 10/01 Preliminary version for software version 2.00 Beta. 1/02 Original version. 2/02 Updated certifications. C1522M-A 5/03 Updated with additional functionality (such as Macros triggered by alarms).
W orldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
デバイスPelco cm6800-322x6の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Pelco cm6800-322x6をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPelco cm6800-322x6の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pelco cm6800-322x6の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pelco cm6800-322x6で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pelco cm6800-322x6を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPelco cm6800-322x6の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pelco cm6800-322x6に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPelco cm6800-322x6デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。