PlanarメーカーPR9020の使用説明書/サービス説明書
ページ先へ移動 of 76
PR9020 LCD Projector User's Manual Operating Guide www .planar .com.
Impor tant R ecyc le Instruction La mp( s) i nsi de t his pro duc t co nta in m erc ury . Th is p rod uct may con tai n o the r electronic waste that can be hazardous if not disposed of properly . Recycle or dispose i n a cc or da nc e w it h l oc al , st at e, o r f ed er al La ws .
1 Thank you for purchasing this projector . ►Before using this product, please read the "User's Manual" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference.
2 Contents Contents About this manual . . . . . . . . . . . 1 Contents . . . . . . . . . . . . . . . . . . 2 Projector features . . . . . . . . . . . 3 Prepar a tions . . . . . . . . . . . . . . . 3 Contents of package . . . . . . . . . . . . . 3 Fastening the lens cover .
3 Projector features / Prepar a tions • Keep the original packing materials for future reshipment. Be sure to use the original packing materials when moving the projector . Use special caution for the lens. NO TE Projector features This projector is used to project various picture signals onto a screen.
4 Par t names Part names Projector (1) Speakers (x 4) ( 37 ) (2) Focus ring ( 19 ) (3) Zoom ring ( 19 ) (4) Lamp cover ( 60 ) The lamp unit is inside.
5 Par t names Control panel (1) ST ANDBY/ON button ( 16 ) (2) MENU button ( 23 ) It consists of four cursor buttons. (3) INPUT button ( 17 ) (4) POWER indicator ( 16 ) (5) TEMP indicat.
6 Par t names R emote control (1) Laser pointer ( 13 ) It is a beam outlet. (2) LASER INDICA TOR ( 13 ) (3) LASER button ( 13 ) (4) ST ANDBY/ON button ( 16 ) (5) VOLUME button ( 17.
7 Setting up Setting up Install the projector according to the environment and manner the projector will be used in. ►Place the projector in a stable horizontal position. If the projector falls or is knocked over it could cause injury and/or damage to the projector .
8 Setting up Ar rangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024×768 (a) Screen size (diagonal) (b) Projection distance (±10%) (c) Screen height (±10%), when the vertical lens shift ( 19 ) is set full upward.
9 Setting up Adjusting the projector's eleva tor When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally . Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 8 degrees.
10 Setting up Connecting your de vices Be sure to read the manuals for devices before connecting them to the projector . Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them.
1 1 Setting up Connecting your devices (continued) • Be sure to rea d the manuals for d evices before conne cting them to the p rojector , and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution.
12 Setting up Connecting pow er supply 1. Connect the connector of the power cord to the AC inlet of the projector . 2. Firmly plug the power cord's plug into the outlet. ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in re and/or electrical shock.
13 Remote control Remote control Laser pointer This remote control has a laser pointer in place of a nger or rod. The laser beam works and the LASER INDICA TOR lights while the LASER button is pressed. ►The laser pointer of the remote control is used in place of a nger or rod.
14 Approx. 3 m 30º 30º 30º 30º Approx. 3 m 20º 20º Approx. 3 m Remote control About the remote contr ol signal The remote control works with the projector ’ s remote sensors. This projector has three remote sensors on the front, on the top, and on the back.
15 Remote control Using as a wired r emote control The accessory remote control works as a wired remote control, when the wired control port at the bottom of the remote control connects with the REMOTE CONTROL port on the back of the projector via an audio cable with 3.
16 1. Make sure that the power cord is rmly and correctly connected to the projector and the outlet. Po wer on/off T ur ning on the po wer 2. Remove the lens cover , and set the power switch to the ON position (marked “ I “). The power indicator will light up in steady orange ( 67 ).
17 (*) RGB 1 RGB 2 HDMI VIDEO S-VIDEO COMPONENT (Y , C B /P B , C R /P R ) Operating Operating 1. Press the VOLUME button on the remote control.
18 Operating 1. Press the VIDEO button on the remote control to select an input for video signal. Each time you press the button, the projector switches its video input port as below .
19 Operating • When the vertical lens shift is adjusted, it is recommended to shift the picture upward. NO TE 1. Use the zoom ring to adjust the screen size.
20 Operating 1. Press the POSITION button on the remote control. The “POSITION” indication will appear on the screen. Adjusting the position 2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position. When you want to reset the operation, press the RESET button on the remote control during the operation.
21 Operating • The zoom level can be nely adjusted. Closely watch the screen to nd the level you want. NO TE BLANK LASER ASPECT ESC MENU RESET POSITION AUTO MAGNIFY MY BUTTON VOLUME ON 1 MUTE .
22 Operating BLANK LASER ASPECT ESC MENU RESET POSITION AUTO MAGNIFY MY BUTTON VOLUME ON 1 MUTE OFF 2 FREEZE KEYSTONE SEARCH PUSH ENTER PAGE UP PAGE DOWN STANDBY/ON VIDEO RGB LASER INDICATOR 1. Press the BLANK button on the remote control. The blank screen will be displayed instead of the screen of input signal.
23 Operating 1. Press the MENU button on the remote control or one of the cursor buttons on the projector . The Advanced MENU, or EASY MENU that has priority just after powered on, will appear . If you want to move the menu position, use the cursor buttons after pressing the POSITION button.
24 EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio.
25 EASY MENU EASY MENU (continued) Item Description BRIGHTNESS Using the ◄/► buttons adjusts the brightness. See the BRIGHTNESS item in PICTURE menu ( 26 ). CONTRAST Using the ◄/► buttons adjusts the contrast. See the CONTRAST item in PICTURE menu ( 26 ).
26 PICTURE Menu PICTURE Menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item.
27 PICTURE Menu PICTURE Menu (continued) Item Description COLOR TEMP Using the ▲/▼ buttons switches the color temperature mode. T o adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode.
28 Item Description ACTIVE IRIS Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENT A TION ó THEA TER ó TURN OFF Feature PRESENT A TION The active iris displays the best presentation image for both bright and dark scenes. THEA TER The active iris displays the best theater image for both bright and dark scenes.
29 IMAGE Menu IMAGE Menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item.
30 IMAGE Menu IMAGE Menu (continued) Item Description H PHASE Using the ▲/▼ buttons adjusts the horizontal phase to eliminate icker . Right ó Left • This item can be selected only for an RGB signal or a component video signal.
31 INPUT Menu INPUT Menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item.
32 INPUT Menu INPUT Menu (continued) Item Description COMPONENT Using the ▲/▼ buttons switches the function of the COMPONENT (Y , C B /P B , C r /P r ) port. COMPONENT ó SCAR T RGB When the SCART RGB is selected, the COMPONENT (Y , C B /P B , C r /P r ) and VIDEO ports will function as a SCART RGB port.
33 INPUT Menu Item Description FRAME LOCK Set the frame lock function on/off for each port. (1) Use the ▲/▼ buttons to select one of following ports.
34 INPUT Menu INPUT Menu (continued) Item Description RESOLUTION The resolution for the RGB1 and RGB2 input signals can be set on this projector . (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed.
35 SETUP Menu SETUP Menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item.
36 SETUP Menu Item Description KEYSTONE Using the ▲/▼ buttons corrects the horizontal keystone distortion. Shrink the right of the image ó Shrink the left of the image • The adjustable range of this function will vary among inputs. For some input, this function may not work well.
37 A UDIO Menu AUDIO Menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item.
38 SCREEN Menu SCREEN Menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item.
39 SCREEN Menu SCREEN Menu (continued) Item Description ST ART UP Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature MyScreen Screen can be registered by the MyScreen item ( 40 ) .
40 SCREEN Menu Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and ST ART UP screen. Display the image you want to capture before executing the following procedure. 1.
41 Item Description MESSAGE Using the ▲/▼ buttons turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting “NO INPUT IS DETECTED” “SYNC IS OUT OF RANGE” “Searching….
42 OPTION Menu OPTION Menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► .
43 OPTION Menu Item Description AUTO OFF Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) When th e time is set to 0, the proje ctor is n ot turned off a utomatica lly .
44 OPTION Menu Item Description MY BUTT ON This item is to assign one of the following function to MY BUTT ON 1 and 2 on the remote control ( 6 ). Choose 1 or 2 on the MY BUTT ON menu using the ◄/► button rst. Then using the ▲/▼ buttons sets one of the following functions to the chosen button.
45 OPTION Menu Item Description SERVICE (continued) AUTO ADJUST Using the ▲/▼ buttons to select one of the mode. When the DISABLE is selected, the automatic adjustment feature is disabled. FINE ó F AST ó DISABLE FINE: Finer tuning including H.SIZE adjustment.
46 OPTION Menu Item Description SERVICE (continued) KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the ST ANDBY/ON button are locked. TURN ON ó TURN OFF • Please use to avoid a mischief and touching accidentally .
47 OPTION Menu Item Description SECURITY This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer . 1. Using Security Features 1.1 Inputting the P ASSWORD 1.
48 OPTION Menu Item Description SECURITY (continued) 1.3 If you have forgotten your P ASSWORD 1.3-1 Follow the procedure in 1.1-1 to display the ENTER P ASSWORD BOX.
49 OPTION Menu Item Description SECURITY (continued) 2.2-4 Move the cursor to the right side of the P ASSWORD AGAIN BOX and press the ► button to display the P ASSWORD for about 20 seconds, please make note of the P ASSWORD during this time.
50 OPTION Menu Item Description SECURITY (continued) 3.1-3 Input a 4 part PIN Code using the ▲/▼/◄/► /RGB and INPUT buttons. The PIN CODE AGAIN BOX will appear .
51 OPTION Menu Item Description SECURITY (continued) 4. Using the T ransition Detector Function While the T ransition Detector function is ON, when power switch is started to supply to the projector , it might react as below . • T ransition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.
52 OPTION Menu Item Description SECURITY (continued) 4.3 Setting the T ransition Detector off 4.3-1 Follow the procedure in 4.1-1 to display the Transition Detector on/of f menu. 4.3-2 Select TURN OFF to display the ENTER P ASSWORD BOX (large). Enter the registered P ASSWORD and the screen will return to the T ransition Detector on/off menu.
53 Item Description SECURITY (continued) 5.2 Displaying the MY TEXT (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLA Y menu and press the ► button to display the MY TEXT DISPLA Y on/off menu. (2) Use the ▲/▼ buttons on the MY TEXT DISPLA Y on/off menu to select on or of f.
54 OPTION Menu Item Description SECURITY (continued) 5.3-3 Turning the MY TEXT P ASSWORD of f (1) Follow the procedure in 5.3-1 to display the MY TEXT P ASSWORD on/off menu. (2) Select TURN OFF to display the ENTER P ASSWORD BOX (large). Enter the registered P ASSWORD and the screen will return to the MY TEXT P ASSWORD on/off menu.
55 Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network. Select “NETWORK” from the main menu to access the following functions.
56 NETWORK Menu NETWORK Menu (continued) Item Description SETUP (continued) IP ADDRESS Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF . • The IP ADDRESS is the number that identies this projector on the network.
57 NETWORK Menu NETWORK Menu (continued) Item Description PROJECTOR NAME (1) Use the▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME menu and press the ► button. The PROJECTOR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the rst 3 lines.
58 NETWORK Menu NETWORK Menu (continued) Item Description e-SHOT Selecting this item displays the e-SHOT menu. The application software “PJT ransfer” is required to store image(s) into the projector .
59 NETWORK Menu NETWORK Menu (continued) Item Description INFORMA TION Selecting this item displays the NETWORK -INFORMA TION- dialog for conrming the network settings. • The PROJECT OR NAME is displayed. • Nothing (blank) is shown in the “PROJECTOR NAME” field until you setup the item ( 57 ).
60 Maintenance Maintenance A lamp has nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a dif ferent lifetime, and some may burst or burn out soon after you start using them.
61 Maintenance Lamp war ning Lamp (continued) HIGH VOL T AGE HIG H TE MPERA TURE HIGH PRESSU RE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time.
62 Maintenance Please check and clean the air lter periodically . If the air lter becomes clogged by dust or the like, internal temperatures rise, which could cause a re, a burn or malfunction to the projector . When the indicators or a message prompts you to clean the air lter , comply with it as soon as possible.
63 Maintenance • Please replace the air lter when it is damaged or too soiled. • When you replace the projection lamp, please replace the air lter . An air lter of specied type will come together with a replacement lamp for this projector .
64 Maintenance Consumption of the battery makes the clock not to work correctly . When the clock is wrong or it has stopped, please replace the battery according to the following procedures. Inter nal cloc k ba tter y 1. T urn the projector off, and unplug the power cord.
65 Maintenance Other care In order to ensure the safe use of your projector , please have it cleaned and inspected by your dealer about once every year . 1. T urn the projector off, and unplug the power cord. Allow the projector to cool sufciently .
66 T roubleshooting T roubleshooting R elated messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below .
67 T roubleshooting R e garding the indicator lamps Lighting and ashing of the POWER indicator , the LAMP indicator , and the TEMP indicator have the meanings as described in the table below .
68 T roubleshooting Regarding the indicator lamps (continued) • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the “ ” (OFF) side of the power switch, and wait at least 45 minutes.
69 T roubleshooting Phenomena that may be easy to be mistak en for machine def ects ► Never use the projector if abnormal operations such as smoke, strange odor , excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter , etc.
70 T roubleshooting Phenomena that may be easily mistaken for machine defects (continued) (Continued on next page) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables.
71 T roubleshooting • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect. NO TE Phenomenon Cases not involving a machine defect Reference page Video screen display freezes.
72 Warr anty and after-ser vice / Specica tions W arranty and after-service If a problem occurs with the equipment, rst refer to the “T roubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company .
73 Specications Specications (continued) [unit: mm] 418 319 154 139.
Planar Systems, Inc. Corporate Headquarters 1 195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Suppor t T elephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar .com Online T echnical Library: http://www .
デバイスPlanar PR9020の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Planar PR9020をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPlanar PR9020の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Planar PR9020の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Planar PR9020で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Planar PR9020を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPlanar PR9020の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Planar PR9020に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPlanar PR9020デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。