RedMaxメーカーAG2300の使用説明書/サービス説明書
ページ先へ移動 of 24
The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. WARNING OWNER / OPERA T OR MANUAL POWER AUGER 3898-93110 (711) AG2300 Thank you for purchasing a RedMax product.
Read this manual carefully to understand all safety precautions, controls, proper operation and maintenance of your RedMax power auger . Failure to do so could result in serious injury .
CONTENTS SAFETY PRECAUTIONS .................................................................................. 4 IN ORDER TO ENSURE PROPER AND SAFE OPERATION OF YOUR POWER AUGER WORK GEAR AND CLOTHING.
■ In order to ensure proper and safe operation of your power auger • Read this Owner/Operator Manual carefully. Be sure you understand how to operate this unit properly before you use it. Failure to do so could result in serious injury. • Be sure to keep this manual handy so that you may refer to it later whenever any questions arise.
Safety Precautions ■ Work gear and clothing • When using your power auger, always be sure to wear strong, durable, work clothing; shirts should be long-sleeved shirts and pants should be full-length pants reaching down to the ankles. • Always be sure to wear and helmet and face protector when using your power auger.
6 Safety Precautions ■ Things to check before using your power auger • Before beginning work, look around carefully to get a feel for the shape of the land, and whether or not there are any obstacles which might get in the way while working, and remove any obstacles which can be cleared away before beginning work.
■ Things to be careful about when using your power auger • When using your power auger, grip the handles of the power auger firmly with both hands, place your feet slightly apart (slightly further.
8 Safety Precautions ■ Notes on care and maintenance of your power auger • In order to maintain your power auger in proper working order, perform the maintenance and checking operations described in this manual at regular intervals.
• Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool before refueling the unit. Select outdoor bare ground for fueling and move at least 3m(10ft) away from the fueling stop before starting the engine.
10 Operation • The throttle lock makes starting easier. Always use it when starting the engine. 5. While firmly holding the auger as illustrated, vigorously pull the starter rope. 6. When engine has ignited first, open the choke (move the choke lever backward), pull the starter rope again and the engine will start.
Operation ■ Stopping Engine • Release the throttle lever and press on the red button until the engine comes to a complete stop. ■ Drilling • Keep a firm grip of the auger at all times on a wide stance and by holding the handle with both hands.
12 Maintenance • Before cleaning, inspecting or repairing your unit, make sure that engine has stopped and is cool. Disconnect the spark plug terminal to avoid accidental engine starts. ■ Daily Inspection •R emove grass or dust, from the entire body.
13 Storage ■ Before Long-term Storage • Drain fuel tank and run engine out until all fuel in the carburetor is used up. • Remove the spark plug and drop a spoonful 2 cycle oil into the cylinder. Crank the engine several times and replace the plug.
Model Name AG2300 Engine Displacement cu.in(cc) ........................................................................................1.37 (22.5) Maximum power HP ....................................................................................1.
Parts List NOTE : 1. Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company.
Parts List : AG2300 16 Fig.1 AUGER DRIVE SHAFT GROUP.
AG2300 Fig.1 AUGER DRIVE SHAFT GROUP Key# Part Number Description Q'ty 1 3890-11101 CASE(A)COMP 1 2 3890-11112 • CASE(A) 1 3 3890-11140 • PIN 2 4 3890-11201 CASE(B)COMP 1 5 06030-06001 BEARIN.
Parts List : AG2300 18 Fig.2 DRILL and ACCESSOR Y GROUP.
AG2300 Fig.2 DRILL and ACCESSOR Y GROUP Key# Part Number Description Q'ty 1 3206-52700 DRILL S20 ASSY 1 2 3206-52710 • DRILL S20 1 3 3200-51130 • PIN 1 4 3200-51140 • CLIP 1 5 3206-52800 DR.
Parts List : AG2300 20 Fig.3 ENGINE GROUP.
AG2300 Fig.3 ENGINE GROUP Key# Part Number Description Q'ty 1 5602-12110 CYLINDER 1 2 5500-12211 GASKET,base 1 3 1850-12130 BOLT 2 4 5500-13162 INSULATOR 1 5 5500-13120 GASKET,insulator 1 6 5500-.
Parts List : AG2300 22 Fig.4 CARBURETOR GROUP.
AG2300 Fig.4 CARBURET OR GROUP Key# Part Number Description Q'ty 1 5501-81000 CARBURETOR ASSY WYJ-113 1 2 1752-81110 • SCREW 2 3 5500-81120 • BRACKET 1 4 1751-81130 • E-RING 1 5 1881-81140 .
KOMA TSU ZENOAH AMERICA INC. 1505 Pavilion Place Suite A Norcross, Georgia 30093 ©P rinted in Japan RedMax ® POWER AUGER MODEL AG2300 2-YEAR LIMITED W ARRANTY For two (2) years [1 year if used commercially] from the date of original purchase of the model AG2300 unit, KOMATSU ZENOAH AMERICA INC.
デバイスRedMax AG2300の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
RedMax AG2300をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRedMax AG2300の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。RedMax AG2300の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。RedMax AG2300で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
RedMax AG2300を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRedMax AG2300の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、RedMax AG2300に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRedMax AG2300デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。