AudiovoxメーカーFR140の使用説明書/サービス説明書
ページ先へ移動 of 22
Owner’s Manual Model FR-140 Two Way Family Radio Customer Service 1-800-654-4994 ÿþýý ÿþý þ ÿ þ.
CONGRA TULA TIONS ON YOUR SELECTION OF THE FR-140 (F AMIL Y RADIO) It is one the most sophisticated and reliable two way Family radios available. BEFORE OPERATING YOUR FR-140 (FAMILY RADIO) READ THIS .
FEA TURES Y our FR-140 Family Radio is a portable, easy to use, two-way radio that you can carry almost anywhere. It is skillfully constructed to give you reliable communications for many different applications. Th e FR-140 is ideal for use around the house, in your boat, on hunting and camping trips, on the ski slopes or at the mall.
þÿÿ ÿ þ ÿÿ FUNCTION AND LOCA TION OF THE CO.
1. Power On/Off - V olume Control: Rotate clockwise to turn the unit on and increase the listening volume level. Rotate counterclockwise t o decrease the listening volume level or turn the transciever off. 2. Push-to-T alk (PTT) button: Press to transmit.
ýþÿü ÿ ÿ ý LCD DISPLA Y AND OPERA TION The FR-140 is equipped with an LCD display to indicate its settings and functions. The Display incorporates automatic backlighting to allow it to be seen in the dark. Pressing any of the buttons except the PTT (Push-to-T alk) button, will illuminate the display .
1 14 Displays the current channel number (1 to 14). 2 3 8 Displays the current CTCSS number (1 to 38). 3 SC Appears while scanning channels. 4 TX Appears while transmitting. 5 BUSY Appears while receiving. 6 PS Power Saver: Appears when the battery saver mode is active 7 Appears while the Button Conformation T one feature is activated.
BA TTERY INST ALLA TION Y our FR-140 requires three “AA” alkaline cells or three rechargeable “AA” nickel - cadmium cells. Alkaline batteries will provide the best performance from your transciever . Remove the battery cover by releasing the clasp at the bottom of the unit and lifting the cover from the battery compartment.
ÿþýý ÿþý þ ÿ þ T o Select a Channel Use the UP and DOWN buttons to select the desired channel from 1 to 14. The current channel setting will be shown on the display .
T o Receive 1. T urn the power on. 2. Check the battery condition on the display . If the icon is displayed, charge or replace the batteries. 3 . Set the desired channel and CTCSS code. 4. Adjust the volume control to the desired listening volume by pressing and holding the monitor button while turning the volume control knob.
T o T ransmit 1. Set the desired channel. 2. Press and hold the PTT (Push-to-T alk) button while speaking slowly and clearly in a normal voice, approximately 2 to 3 inches from the microphone. 3. The TX icon will be displayed while transmitting. 4 . Release the PTT button when you finish speaking to receive incoming signals.
Menu Button Pressing this button will sequentially select among the following features, Continuous T one Coded Squelch System (tc), channel scan (SCan), button conformation tones (BP) and the keypad lock (LC). Each successive press of the button will advance the display to the next feature in order .
To select a CTCSS squelch code, press the menu button once or until “tc” is shown on the display. The small flashing numbers to the right represent the current squelch code setting. “OF” (off) indicates that the CTCSS system is off. Use the UP and DOWN buttons to select the desired squelch code number.
CTCSS Freq. Hz CTCSS Freq. Hz 1 67.0 20 131.8 2 71.9 21 136.5 3 74.4 22 141.3 4 77.0 23 146.2 5 79.7 24 151.4 6 82.5 25 156.7 7 85.4 26 162.2 8 88.5 27 167.9 9 91.5 28 173.8 10 94.8 29 179.9 1 1 97.4 30 186.2 12 100.0 3 1 192.8 13 103.5 3 2 203.5 14 107.
Channel Scan This feature allows the transceiver to automatically check all 14 channels for activity . Press the menu button twice or until “SC An ” is shown on the display . Pressing the UP or DOWN buttons will cause the transceiver to immediately begin scanning the channels for activity .
Button Conformation T ones The transceiver can be set to confirm each button press with a beep tone or , if the user prefers, these confirmation tones can be turned off. Whenever the tones are on, the icon will be shown on the display . T o turn the beep tones on or of f, press the menu button three times or until “BP” shows on the display .
Keypad Lock T o prevent the transceiver ’s settings from being inadvertently changed, the keypad can be locked. This will inhibit the function of the UP and DOWN buttons. This is useful when the FR-140 is being used by small children, or when the unit is kept in a pocket.
W ARNING Remove the batteries from the transceiver if it is not expected to be used for long periods. This will eliminate the possibility of battery acid leaking from the batteries and corroding the transceiver . Avoid exposing the unit to water or extremes of temperature.
Channel Frequencies: Channel M Hz Channel M Hz 1 462.5625 8 467.5625 2 462.5875 9 467.5875 3 462.6125 10 467.6125 4 462.6375 1 1 467.6375 5 462.6625 12 467.6625 6 462.6875 13 467.6875 7 462.7125 14 467.7125 SPECIFICA TIONS Channels: 1 4 Output Power: 50 0 mw E RP Battery Life Alkaline: 30 - 35 Hours NiCd: 13 Hours Power Source: 4.
Applies to Audiovox Family Radio Service Products. AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under norm.
Insert Warranty.
150 Marcus Blvd. Hauppauge, NY 11788 Form No 128-5378.
デバイスAudiovox FR140の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Audiovox FR140をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAudiovox FR140の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Audiovox FR140の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Audiovox FR140で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Audiovox FR140を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAudiovox FR140の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Audiovox FR140に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAudiovox FR140デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。