RuggedComメーカーRX1501の使用説明書/サービス説明書
ページ先へ移動 of 46
RuggedBackbone™ RX1501 Hardware Installation Guide Revision 104 - October 14, 2011 www.RuggedCom.com.
RuggedBackbone™ RX1501 RuggedBackbone™ RX1501: Hardware Installation Guide Copyright © 2011 RuggedCom Inc. All Rights Reserved Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized except where expressly permitted.
RuggedBackbone™ RX1501 RuggedCom® RuggedBackbone™ 3 RX1501 Installation Guide Rev 104 Table of Contents FCC Statement And Cautions ................................................................................................... 8 1. Product Overview .
RuggedBackbone™ RX1501 RuggedCom® RuggedBackbone™ 4 RX1501 Installation Guide Rev 104 3.14. APE: Application Processing Engine ...................................................................... 35 3.14.1. APE Overview ........................
RuggedBackbone™ RX1501 RuggedCom® RuggedBackbone™ 5 RX1501 Installation Guide Rev 104 List of Figures 2.1. RX1501 Chassis Slot Assignment .................................................................................... 12 2.2. Front View - RX1501 .
RuggedBackbone™ RX1501 RuggedCom® RuggedBackbone™ 6 RX1501 Installation Guide Rev 104 3.20. RJ45 Serial Pin Configuration ......................................................................................... 28 3.21. RJ45 DDS Pin Configuration .
RuggedBackbone™ RX1501 RuggedCom® RuggedBackbone™ 7 RX1501 Installation Guide Rev 104 List of Tables 2.1. Module Status LED Indications ......................................................................................... 13 3.1. DB9 Serial Console Pinout .
FCC Statement And Cautions RuggedCom® RuggedBackbone™ 8 RX1501 Installation Guide Rev 104 FCC Statement And Cautions Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules.
1. Product Overview RuggedCom® RuggedBackbone™ 9 RX1501 Installation Guide Rev 104 1. Product Overview 1.1. Functional Overview The RuggedBackbone™ RX1501 is a cost-efficient, rugged layer 3 switch and router.
1. Product Overview RuggedCom® RuggedBackbone™ 10 RX1501 Installation Guide Rev 104 WAN Port Options • Up to 4 T1/E1 ports via RJ45 connectors (channelized/unchannelized) • Up to 2 E1 ports via.
1. Product Overview RuggedCom® RuggedBackbone™ 11 RX1501 Installation Guide Rev 104 Universal Power Supply Options • Single, removable power supply module • Single power supply • Fully integr.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 12 RX1501 Installation Guide Rev 104 2. RuggedBackbone™ Modules The RX1501 chassis provides seven module slots . Each slot accommodates a particular type of RuggedCom module. Figure 2.1, “RX1501 Chassis Slot Assignment” shows the module slots on the RX1501.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 13 RX1501 Installation Guide Rev 104 2.1. Front Panel The RX1501 Front Panel is equipped with an RS232 serial console port for initial management functions, and a locally connected 10/100Base-T Ethernet port for system management out of band from the switch fabric.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 14 RX1501 Installation Guide Rev 104 2.2. Line Modules (LM) The RuggedBackbone™ RX1501 supports six line modules in slots LM1 through LM6 . Several types of line modules may be ordered, depending on the type, speed, and number of Ethernet ports required.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 15 RX1501 Installation Guide Rev 104 2.2.3. SFP Modular Figure 2.12. FG5*: 2 × 1000LX/1000SX SFP Figure 2.13. FX5*: 4 × 100FX/100LX/100SX SFP Figure 2.14. 6FX50: 6 × 100FX SFP 2.2.4. WAN Figure 2.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 16 RX1501 Installation Guide Rev 104 2.2.7. DDS - Digital Data Services Figure 2.23. D02: 1 × DDS RJ45 2.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 17 RX1501 Installation Guide Rev 104 2.3. Power Supply The RX1501 is equipped with a single power module. A single power module is capable of delivering a maximum of 42W, and accepts either AC or DC power at its input.
3. Installation RuggedCom® RuggedBackbone™ 18 RX1501 Installation Guide Rev 104 3. Installation 3.1. Rack Mounting The RuggedBackbone™ RX1501 mounts to a standard 19" rack. Rack mounting brackets can be installed at the front or rear of the chassis.
3. Installation RuggedCom® RuggedBackbone™ 19 RX1501 Installation Guide Rev 104 Figure 3.3. RX1501Rack Mounting Dimensions – Top View Figure 3.4. RX1501Rack Mounting Dimensions – Rear View.
3. Installation RuggedCom® RuggedBackbone™ 20 RX1501 Installation Guide Rev 104 3.1.2. Panel and DIN Rail Mounting The RuggedBackbone™ RX1501 features optional mounting brackets for panel and DIN rail mounting. The optional brackets attach to both sides of the appliance at the rear of the chassis.
3. Installation RuggedCom® RuggedBackbone™ 21 RX1501 Installation Guide Rev 104 3.1.3. Panel and DIN Rail Mounting Dimensions Figure 3.7. Panel and DIN Rail Mounting Dimensions.
3. Installation RuggedCom® RuggedBackbone™ 22 RX1501 Installation Guide Rev 104 3.2. Power Supply Wiring and Grounding The RX1501 supports a single power supply, power module 1 (PM1). Power connections are located on the PM1 module face plate. An optional chassis ground connection is located on the front panel as shown in Figure 2.
3. Installation RuggedCom® RuggedBackbone™ 23 RX1501 Installation Guide Rev 104 3.2.3. Chassis Ground Connection The RX1501 chassis ground connection, shown in Figure 3.12, “Chassis Ground Connection” , uses a #10-32 screw. It is recommended to terminate the ground connection in a #10 ring lug.
3. Installation RuggedCom® RuggedBackbone™ 24 RX1501 Installation Guide Rev 104 3.2.5. DC Power Supply Wiring Example + Figure 3.14. Wiring for Single DC Power Supply (24P or 48P module shown) • For 125/230VAC rated equipment, a appropriately rated AC circuit breaker must be installed.
3. Installation RuggedCom® RuggedBackbone™ 25 RX1501 Installation Guide Rev 104 3.4. Serial Console Port The serial console port on the front panel provides access to the boot-time control and configuration menu interface, and a console interface to the ROX™ operating system.
3. Installation RuggedCom® RuggedBackbone™ 26 RX1501 Installation Guide Rev 104 3.6. WAN Ports: BNC The RX1501 supports optional E1 WAN ports with BNC connectors. The Tx and Rx connections are labelled on the line module. See the illustration below for the connection configuration.
3. Installation RuggedCom® RuggedBackbone™ 27 RX1501 Installation Guide Rev 104 Cabling Category 1000Base- TX Compliant Required Action < 5 No New wiring infrastructure required. 5 Yes Verify TIA/EIA-568-A compliance. 5e Yes No action required. New installations should be designed with Category 5e or higher.
3. Installation RuggedCom® RuggedBackbone™ 28 RX1501 Installation Guide Rev 104 3.8. Serial Ports: RJ45 The RX1501 supports serial port line modules with RJ45 connections. On power-up, all serial ports default to RS485 mode. Each port can be individually set to RS232, RS485, or RS422 mode via software.
3. Installation RuggedCom® RuggedBackbone™ 29 RX1501 Installation Guide Rev 104 3.10. DDS Rx and Tx LED Indications The DDS module features Rx and Tx LED indicators that display transmit and receive status.
3. Installation RuggedCom® RuggedBackbone™ 30 RX1501 Installation Guide Rev 104 3.11.1. Module Insertion – SFP Special attention must be paid to the orientation of SFP modules upon installation in the RX1501 chassis. The figure below shows the proper orientation of SFP modules installed in both upper and lower line modules.
3. Installation RuggedCom® RuggedBackbone™ 31 RX1501 Installation Guide Rev 104 Figure 3.25. SFP module removal 3.12. Fiber Ethernet Ports Depending on the order code of the product, the RuggedBackbone™ RX1501 can be equipped with several different types of fiber optic ports.
3. Installation RuggedCom® RuggedBackbone™ 32 RX1501 Installation Guide Rev 104 3.13. Cellular Modems The RX1501 can be equipped with cellular modem modules for operation on GSM, EDGE, HSPA +, or CDMA networks. The cellular modems feature 50 Ω SMA antenna connectors on the front plate of each module.
3. Installation RuggedCom® RuggedBackbone™ 33 RX1501 Installation Guide Rev 104 3.13.1. GSM, EDGE, HSPA+ Cellular Modem Card The HSPA option is available for use on various GSM based networks. This option supports GSM, GPRS, EDGE, UMTS and WCDMA/HSDPA/HSUPA.
3. Installation RuggedCom® RuggedBackbone™ 34 RX1501 Installation Guide Rev 104 3. Note the location of the SIM card cages. For modules W11 and W32, install the SIM card in SIM 1 .
3. Installation RuggedCom® RuggedBackbone™ 35 RX1501 Installation Guide Rev 104 3.14. APE: Application Processing Engine 3.14.1. APE Overview The APE (Application Processing Engine) is an x86-based computer designed to occupy a single line module slot on the RX1501.
3. Installation RuggedCom® RuggedBackbone™ 36 RX1501 Installation Guide Rev 104 3.14.3. Secondary Network Interface In addition to the gigabit Ethernet interface on the faceplate, the APE features a gigabit Ethernet interface connecting to a port on the RX1501 chassis.
3. Installation RuggedCom® RuggedBackbone™ 37 RX1501 Installation Guide Rev 104 3.14.4. Installing an Operating System We recommend that the operating system be installed and configured by users with experience in installing and administering the chosen operating system.
3. Installation RuggedCom® RuggedBackbone™ 38 RX1501 Installation Guide Rev 104 3.14.5. The APE BIOS The APE module features a BIOS with functionality similar to that of a typical PC.
3. Installation RuggedCom® RuggedBackbone™ 39 RX1501 Installation Guide Rev 104 3.14.8. FAQs Q: How do I use a CD or DVD to install an operating system on the APE module? A: Connect an external CD/DVD drive to one of the APE USB ports.
4. Technical Specifications RuggedCom® RuggedBackbone™ 40 RX1501 Installation Guide Rev 104 4. Technical Specifications 4.1. Power Supply Specifications Input Range Power Supply Type Min Max Internal Fuse Rating Max.
4. Technical Specifications RuggedCom® RuggedBackbone™ 41 RX1501 Installation Guide Rev 104 4.4. Fiber Ethernet Port Specifications The following sections detail fiber optic specifications for ports that can be ordered with the modules on a RuggedBackbone™ RX1501.
4. Technical Specifications RuggedCom® RuggedBackbone™ 42 RX1501 Installation Guide Rev 104 4.4.2. Gigabit Ethernet (1Gbps) Optical Specifications Fixed Gigabit Transceivers Order Code Mode Connector Type Cable Type ( µ m) Tx λ (typ.) (nm) Tx min (dBm) Tx max (dBm) Rx Sensitivity (dBm) Rx Saturation (dBm) Distance (typ.
5. EMI And Environmental Type Tests RuggedCom® RuggedBackbone™ 43 RX1501 Installation Guide Rev 104 5. EMI And Environmental Type Tests Test Description Test Levels Severity Levels Enclosure Contact +/- 8 kV 4 IEC 61000-4-2 ESD Enclosure Air +/- 15 kV 4 IEC 61000-4-3 Radiated RFI Enclosure Ports 20 V/m Note a Signal ports +/- 4kV @ 2.
5. EMI And Environmental Type Tests RuggedCom® RuggedBackbone™ 44 RX1501 Installation Guide Rev 104 Test Description Test Levels Enclosure Contact +/-2kV, +/-4kV, +/- 8kV IEEE C37.90.3 ESD Enclosure Air +/-4kV, +/-8kV, +/-15kV IEEE C37.90.2 Radiated RFI Enclosure ports 35 V/m Signal ports +/- 4kV @ 2.
6. Agency Approvals RuggedCom® RuggedBackbone™ 45 RX1501 Installation Guide Rev 104 6. Agency Approvals Agency Standards Comments TUV UL 60950-1:2007, CAN/CSA-C22.
7. Warranty RuggedCom® RuggedBackbone™ 46 RX1501 Installation Guide Rev 104 7. Warranty RuggedCom warrants this product for a period of five (5) years from the date of purchase. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void.
デバイスRuggedCom RX1501の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
RuggedCom RX1501をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRuggedCom RX1501の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。RuggedCom RX1501の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。RuggedCom RX1501で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
RuggedCom RX1501を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRuggedCom RX1501の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、RuggedCom RX1501に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRuggedCom RX1501デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。