Auto PageメーカーRF-520LCDの使用説明書/サービス説明書
ページ先へ移動 of 19
RF - 520 LCD 2 - WAY AM/AM LCD COMMUNICATION PROFESSIONAL VEHICLE SECURITY SYSTEM OPERATIONS MANUAL.
2 Introduction 3 Changing Battery XT - 72S Standard Transmitter 3 Remote Transmitter Operation 4 LCD Transmitter Operation 5 Button Lock LCD Transmitter 5 LED Display 5 Chirp Indicators 5 Parking Ligh.
3 Congratulations on your purchase of the RF520LCD vehicle security system. We sincerely hope the purchase of the RF520 security system gives peace of mind to you.
4 WARNINGS: As with any product that performs automatic functions, there are certain safe ty precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control.
5 LCD DISPLAY TRANSMITTER OPERATION ONLY: Transmitter Button System Function Remark - (C) System’s Trigger Check Press within 3 seconds - - (C) System’s Status Check Press within 3 seconds (1 second) LCD screen lamp turns on for 5 seconds.
6 ALARM OPERATING CONDITION: Siren / Horn Parking Light LED Doors Starter Dome Light 1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disable 2. Disarming 2 or 4 Chirps 2 or 3 Flashes Unlocking Turns on for 30 - sec 3. Trigger Alarming Flashes Slo w Flash Disable Flashes 4.
7 PASSIVE ARMING Active arming / disarming is controlling your security system via the remote transmitter. This security system is equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds after the last door is closed.
8 TWO STEPS DOOR UNLOCK : This feature will independently unlock the driver’s door only when disarming the security system. Pushing the button a second time within 3 seconds will unlock the other doors.
9 TRIGGER THE SYSTEM When armed, your vehicle is protected as follows: 1. Light impact will trigger the warn - away signal. 2. Heavy impacts / Doors open / Hood open / Trunk open / Turn on the ignition key will trigger the programmed sequence. The starter disable relay (if installed) prevents the vehicle’s starter from cranking.
10 SYSTEM’S STATUS CHECK (For two - way transceiver operation only) When you want to check the system’s present status through the LCD screen, Press the transceiver button twice, within 3 seconds press (C) button. It responds with one melody sound, the LCD screen should be illuminated.
11 CHANNEL 5 AUXILIARY CONTROL OUTPUT ( Available Option) Press the transmi tter + button to active Channel 5 function. Channel 5 is a programmable output. This feature, when installed with optional accessories, may be used to operate power windows, sunroofs, etc.
12 LCD REMOTE CONTROL TRANSCEIVER : Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or such Obstacles like tall buildings and so on, the transmission range may get shorter as the system uses low out put powered frequency.
13 Door Open Warning Doors are illegally opened (Zone 3) Trunk/Hood Trigger Trunk or Hood is illegally opened (Zone 2) Shock Sensor Trigger Trigger on Shock Sensor (Zone 4) Warn Away trigger T rigger .
14 Screen Lamp ON: Press and hold the button one second, with one melody sound and the LCD screen lamp will turns on for 5 sec. Power Save Mode: While the power save mode, the LCD remote transceiver uses “0” current to save the battery power.
15 Set Up Fixed Count Down Timer: 1. Press the button first, within 3 seconds press and hold the ( ) button for two seconds, the LCD screen will shows icon and timer (ie. 0:10), 2. Press the ( ) button again showing next order time on the screen ( ie.
16 Timer Setting: Example to AM10:30 1. Press & hold the button for 3 seconds, with two - melody sound and the “Hours” digit flashes for adj usting. 2. Press the or button to decrease or increase the “Hour” digit until AM 10 : xx 3. Press the button once again then the “Minute” digit flashes for adjusting.
17 LIMITED LIFETIME WARRANTY PROVISIONS ( U.S . and Continental U.S. Only) 1. AutoPage, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery.
18 This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit this WARRANTY CARD, which must have complete information to receive warranty service.
19 1815 West 205 th Street Suite 101 Torrance, California 90501 - 1525 Main Office: 310 - 618 - 2002 Customer Service: 800 - 262 - 2527 Ext. 462 www.autopageusa.
デバイスAuto Page RF-520LCDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Auto Page RF-520LCDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAuto Page RF-520LCDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Auto Page RF-520LCDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Auto Page RF-520LCDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Auto Page RF-520LCDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAuto Page RF-520LCDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Auto Page RF-520LCDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAuto Page RF-520LCDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
