SamsungメーカーP63FNの使用説明書/サービス説明書
ページ先へ移動 of 120
SyncMaster P50F,P50FN,P63F,P63FN PDP Monitor User Manual.
Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property dam- age. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment.
Ensure that the power plug is plugged into the power outlet firmly and correctly. • Otherwise, this may result in fire. Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet.
Keep heating appliances as far away from the power cord or the product as possible. • Otherwise, this may result in electric shock or fire. Do not install it in a badly ventilated location such as a bookcase or closet. • Otherwise, this may result in fire due to an increase in the in- ternal temperature.
When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth. • Otherwise, it may result in fire. When cleaning the product, make sure to disconnect the power cord. • Otherwise, it may result in electric shock or fire. When cleaning the product, disconnect the power cord and clean it softly with a dry cloth.
If thunder or lightening is occurring, do not touch the power cord or antenna cable. • Otherwise, this may result in electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. • Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable.
If you continually move closer to the product screen, your eye- sight may be failing. Take a rest for at least five (5) minutes after using the monitor for one (1) hour. This reduces the weariness of your eyes. Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations.
The batteries (and rechargeable batteries) are not ordinary re- fuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling.
Introduction Package Contents Note Please make sure the following items are included with your PDP Display. If any items are missing, contact your dealer.
Others (Not available in all loca- tions) (3301-001305) Sold separately DVI Cable Wall Mount KIT LAN Cable (Applicable to the P50FN / P63FN model only) TV tuner box NetWork Box (Applicable to the P50F / P63F model only) Semi Stand KIT (P50F(N)) Note • You can purchase and connect a separate network box or TV tuner box.
SOURCE button [SOURCE] Switches from PC mode to Video mode. Changing the source is only al- lowed for external devices that are connected to the PDP Display at the time. [ PC ] → [ DVI ] → [ AV ] → [ HDMI ] → [ MagicInfo ] Note • The TV menu is available when a TV tuner box is installed.
POWER The power cord plugs into the PDP Display and the wall plug. LAN (LAN Connection Terminal) ( Applicable to the P50FN, P63FN model on- ly) USB(USB Connection Terminal) Keyboard / Mouse, Mass Storage Device Compatible.
RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port DVI / PC / HDMI IN [DVI/PC/HDMI AU- DIO IN] (PC/DVI/HDMI Audio Connection Terminal (Input)) DVI / PC / HDMI IN [HDMI] Connect the HDMI terminal at the back of your PDP Display to the HDMI terminal of your digital output device using a HDMI ca- ble.
Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustra- tion depending on the manufacturer.
POWER The power cord plugs into the PDP Display and the wall plug. LAN (LAN Connection Terminal) ( Applicable to the P50FN, P63FN model on- ly) USB(USB Connection Terminal) Keyboard / Mouse, Mass Storage Device Compatible.
Using a D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC) DVI / PC / HDMI IN [DVI] (PC Video Con- nection Terminal) Using a DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC) DC OUT [5V 1.5A] Connect this to the POWER connector of a TV tuner box or network box.
POWER OFF Number Buttons DEL button + VOL - MUTE TV/DTV MENU INFO COLOR BUTTONS TTX/MIX STILL AUTO S.MODE MDC LOCK SOURCE ENTER/PRE-CH CH/P D.MENU GUIDE RETURN Up-Down Left-Right buttons EXIT SRS MagicInfo P.MODE DUAL/MTS PIP SWAP 1. POWER Turns the product On.
5. + VOL - Adjusts the audio volume. 6. MUTE Pauses (mutes) the audio output temporarily. This is dis- played on the lower left corner of the screen. The audio resumes if MUTE or - VOL + is pressed in the Mute mode. 7. TV/DTV Selects the TV and DTV mode directly.
23. RETURN Returns to the previous menu. 24. Up-Down Left-Right but- tons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 25. EXIT Exits from the menu screen. 26. SRS Selects SRS TruSurround XT mode. 27. MagicInfo MagicInfo Quick Launch Button.
Mechanical Layout (P50F(N)) Mechanical Layout NETWORK MODEL SIZE Introduction.
PDP Display Head NETWORK MODEL SIZE Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order.
Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer.
A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or some of the 4 screws on the wall bracket to adjust the length.
1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice • Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers. • Be careful when installing the product on the bracket as fingers can be caught in the holes.
A - PDP Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the wall bracket. 2. Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle.
Mechanical Layout (P63F(N)) Mechanical Layout NETWORK MODEL SIZE PDP Display Head NETWORK MODEL SIZE Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer.
Wall Bracket(1) Hinge(Left 1, Right 1) Plastic Hanger (4) Screw (A)(11) Screw (B)(4) Anchor (11) Wall Bracket Assembly Note There are two hinges(left and right). Use the correct one. 1. Insert and tighten the Captive Screw in the direction of the arrow.
A - Length between the two locking holes 3. Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drill holes deeper than 35 mm. Fix each anchor in the corresponding hole. Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A.
• Make sure the wall bracket is securely fixed to the wall, or the product may not stay in place after installation. 3. Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear holes of the product. 4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1).
Note You can adjust the bracket angle between -2° and 15°. Make sure to use the top center, and not the leftor the right side of the product to adjust the angle.
Connections Connecting a Computer Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect the AC power in advance.
Connect the audio cable for your PDP Display to the audio port on the back of your computer. Note • Turn on both your computer and the PDP Display. • The DVI cable is optional. • Contact a local SAMSUNG Electronics Service Center to buy optional items.
Note The PDP Display has AV connection terminals to connect AV input devices like DVDs, VCRs or Camcorders. You may enjoy AV signals as long as the PDP Display is turned on. Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder.
Connecting Using a DVI to HDMI Cable Note • Connect the DVI output terminal of a digital output device to the HDMI IN terminal of the PDP Display using a DVI to HDMI cable.
Note Please refer to below image which contains explanations based on 50 inch model. (Only the terminal location is different between 50 inch and 63 inch models) Note Connect the LAN cable.
(Applicable to the P50FN / P63FN model only) Connections.
Using the Software Installation MagicInfo Pro Installation 1. Insert CD into the CD-ROM drive. 2. Click the MagicInfo Pro installation file. 3. When the Install Shield Wizard window appears, click "Next." 4. Select "I agree to the terms of the license agreement" to accept the terms of use.
6. Choose a folder to install the MagicInfo Pro program. 7. Click "Install." Using the Software.
8. The "Installation Status" window appears. 9. It is recommended restarting the system for the normal operation of the MagicInfo Pro Server program.
10. When the installation is complete, the MagicInfo Pro executable icon appears on your desktop. 11. Double-click the icon to start the program. System Requirements CPU RAM Ethernet OS Application Minimum P1.8 256M 100M/1G Windows XP Win- dows 2000 (Service Pack 4) WMP 9 or later Recom- mended P3.
Introduction A Multiple Display Cont rol (MDC) is an application al lowing various displays to be easil y and simultaneously operated on a PC. RS-232C, a standard of serial communication, is used for the communication between a PC and a display.
Main Icons Select Button Remocon Info Grid Safety Lock Display Selection Port Selection Control Tools 1. Use the main icons to switch into each screen. 2. Allows you to enable or disable the remote control s igna l receiving function of the di splay unit.
1. The Multiple Display Cont rol is origin ally set to COM1. 2. If any port other than CO M1 is used, COM1 through COM4 can be sel ecte d in the Port Selection Menu. 3. If the exact port name that is connected to the PDP Di spla y using a serial cable is not se lected, communication wi ll be unavailable.
Info Grid shows some basic information necessary to Power Cont rol. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Use the Select All butto n or Check Box to choose a displa y to control. Power Control allows contro lling some of the functions of the selected display.
- Turns the power of the selecte d display On/Off. 2) Volume - Controls the volume level of the selected display. It receives the volume value of the selected display from the sets a nd displays it in the slider.
Info Grid shows some basic information necessary to Input Source Control. 1) PC - Changes the Input Source of the se lected display to PC. 2) BNC - Changes the Input Source of the se lected display to BNC. 3) DVI - Changes the Input Source of the se lected display to DVI.
Info Grid shows some basic information necessary to Image S ize Control. 1) ( Power Statu s) - Shows the power status of the curren t display. 2) Image Size - Shows the current Image Si ze of the display in use. 3) Input - Shows the current Input Source of the display in use.
Info Grid shows some basic information necessary to Image S ize Control. 1) Click th e Video Source tab to adjust Image Si ze for TV, AV, S-Video, Component , DVI(HDCP), HDMI , DTV.
Info Grid shows some basic information necessary to Time Con trol. 1) Current Time - Set the current time for the sele cted display (PC Time). - To change the current time, first change the PC Time. 2) On Time Setup - Set the Hour, Minut e, AM/PM of On Time Setup, Status, Sou rce, Volume of the selected displ ay.
Info Grid shows some basic information necessary t o PIP Size Control. 1) PIP Size - Shows the current PIP Size of t he display in use. 2) OFF - Turns off the PIP of the selected dis play. 3) Large - Turns on the PIP of the selected displ ay and changes the size to Large.
Info Grid shows some basic information necessary t o PIP Source Control. 1) PIP Source - PIP Source can be controll ed with turning on the PDP Display power. 2) PC - Changes the source of the PIP of the se lected display to PC. 3) BNC - Changes the source of the PIP o f the selected display to BNC.
Info Grid shows some basic information necessary to Sett ings Control. When each function is se lected, the set value of the sel ected function is displayed in the sl ide.When selected, each function fetches th e value for the set and displa ys it on the slide bar.
1. Click Settings of th e main icons and the Settings Control screen appears. Info Grid shows some basic information necessary t o Settings Control. When each f unction is selected, the set valu e of the selected functi on is displayed in the slide. Wh en selected, each functio n fetches the value for the set a nd displays it on the slide bar.
Audio 1. Click Settings of th e main icons and the Settings Control screen appears. Info Grid shows some basic information necessary t o Settings Control. When each f unction is selected, the set valu e of the selected functi on is displayed in the slide.
Info Grid shows some basic information necessary to Sett ings Control. 1) Image Lock - Available only for PC, BNC. 2) Coarse - Adjusts Coarse of the sele cted display. 3) Fine - Adjusts Fine of the sele cted display. 4) Position - Adjusts Position of the selected display.
An "Info Grid" showing seve ral basic data items appears. 1) Maintenance - Allows the Maintenan ce Control function for all i nput sources. 2) Auto Lamp Control - Automatically adju sts the backlight of the select ed display at a specified time.
1) Safety S creen - Eliminates the afterimages t hat can result when the select ed display stays in Pause mode for an exten ded period of time. You can set the repeat cycle timer by selectin g the "Interval" by hour and "Second" by second.
1) Video Wall - A Video Wall is a set of video scree ns that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 2) Video Wall (Screen divider) - The screen can be divided into.
- Check the displays to see if any of the other displays co nnected have the same I D. If more than one displays have the same ID, those displays are not properly detected by the program due to data co nflict. - Check if the Display Set ID is a number between 0 and 25 .
Adjusting the PDP Display Input Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Note • The TV menu is available when a TV tuner box is installed.
Note • The direct button on the remote control is the 'SOURCE' button. Edit Name MENU → ENTER → [ Input ] → → ENTER → [ Edit Name ] → , → ENTER Name the input device connected to the input jacks to make your input source selection easier.
• F model can use MagicInfo menu when mounted Network box. MagicBright MENU → → ENTER → [ Picture ] → ENTER → [ MagicBright ] → , → ENTER MagicBright is a feature providing the optimum viewing environment depending on the con- tents of the image you are watching.
Adjusts the Contrast. Brightness MENU → → ENTER → [ Picture ] → → ENTER → [ Custom ] → → ENTER → [ Bright- ness ] → , → ENTER Adjusts the Brightness. Sharpness MENU → → ENTER → [ Picture ] → → ENTER → [ Custom ] → → → ENTER → [ Sharpness ] → , → ENTER Adjusts the Sharpness.
MENU → → ENTER → [ Picture ] → → → → ENTER → [ Color Control ] Note If you adjust the picture by using the Color Control function, Color Tone will turn to the Cus- tom mode.
Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. Fine MENU → → ENTER → [ Picture ] → → → → → ENTER → [ Image Lock ] → → ENTER → [ Fine ] → , → ENTER Removes noise such as horizontal stripes.
Signal Balance MENU → → ENTER → [ Picture ] → → → → → → → ENTER → [ Signal Bal- ance ] → ENTER → [ Signal Balance ] → , → ENTER Selects either On or Off with the signal control.
6. B-Offset MENU → → ENTER → [ Picture ] → → → → → → → ENTER → [ Signal Balance ] → → ENTER → [ Signal Control ] → → → → → → ENTER → [ B- Offset ] → , → ENTER Size MENU → → ENTER → [ Picture ] → → → → → → → → ENTER → [ Size ] → , → ENTER The Size can be switched.
The PDP Display has four automatic picture settings (" Dynamic ", " Standard ", " Movie " and " Custom ") that are preset at the factory. Dynamic , Standard , Movie , or Custom can be activated. 1. Dynamic 2. Standard 3.
Adjusts the picture Sharpness. Color MENU → → ENTER → [ Picture ] → → ENTER → [ Custom ] → → → → ENTER → [ Color ] → , → ENTER Adjusts the picture Color. Tint MENU → → ENTER → [ Picture ] → → ENTER → [ Custom ] → → → → → ENTER → [ Tint ] → , → ENTER Adds a natural tone to the display.
Color Temp. MENU → → ENTER → [ Picture ] → → → → ENTER → [ Color Temp. ] → , → ENTER Color temp is a measure of the 'warmth' of the image colors.
Turns the Digital Noise Reduction feature Off / On . The Digital Noise Reduction feature allows you to enjoy clearer and crisper images. 1. Off 2. On Film Mode MENU → → ENTER → [ Picture ] → → → → → → → ENTER → [ Film Mode ] → , → ENTER The Film Mode feature offers you a theater-quality viewing experience.
The PDP Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard for the standard factory settings. 2. Music Selects Music when watching music videos or concerts. 3. Movie Selects Movie when viewing movies. 4. Speech Selects Speech when watching a show that is mostly dialogue (i.
Emphasizes high frequency audio. Balance MENU → → → ENTER → [ Sound ] → → ENTER → [ Custom ] → → → ENTER → [ Bal- ance ] → , → ENTER Allows you to Adjusts the sound balance between the left and right speakers.
Setup Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Note • The TV menu is available when a TV tuner box is installed. • F model can use MagicInfo menu when mounted Network box. Language MENU → → → → ENTER → [ Setup ] → ENTER → [ Language ] → , → ENTER You can choose one of 11 languages.
Current Time Setting. Sleep Timer MENU → → → → ENTER → [ Setup ] → → ENTER → [ Time ] → → ENTER → [ Sleep Timer ] → , → ENTER Turns the PDP Display off automatically at certain times. 1. Off 2. 30 3. 60 4. 90 5. 120 6. 150 7.
Off Timer MENU → → → → ENTER → [ Setup ] → → ENTER → [ Time ] → → → → ENTER → [ Off Timer ] → , / , → ENTER Turns the PDP Display off automatically at a preset time.
Energy Saving MENU → → → → ENTER → [ Setup ] → → → → → ENTER → [ Energy Saving ] → , → ENTER This feature adjusts the power consumption of the unit in order to save energy. 1. Off 2. On Note If you want to reduce the standby power consumption, set Energy Saving to On .
Note When Video Wall is running, the Auto Adjustment , Image Lock , and Size functions are not available. Video Wall does not operate in MagicInfo mode.
Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5. Vertical MENU → → → → ENTER → [ Setup ] → → → → → → → ENTER → [ Video Wall ] → → → → ENTER → [ Vertical ] → , → ENTER Sets how many parts the screen should be divided vertically.
• The Safety Screen function scrolls the screen for the specified period of time. • This function is not available when the power is turned off. MENU → → → → ENTER → [ Setup ] → → .
Sets how many pixels the screen moves vertically. Five adjustment levels: 1, 2, 3, 4, and 5. Time MENU → → → → ENTER → [ Setup ] → → → → → → → → ENTER → [ Safety Screen ] .
You can change the Safety Screen Type. 1. Scroll 2. Bar 3. Eraser 4. All White 5. Pattern Period MENU → → → → ENTER → [ Setup ] → → → → → → → → ENTER → [ Safety Screen ] .
Scroll MENU → → → → ENTER → [ Setup ] → → → → → → → → ENTER → [ Safety Screen ] → → → ENTER → [ Scroll ] This function prevents after-images on the screen by moving all the pixels on the PDP ac- cording to a pattern.
This function prevents after-images on the screen by changing the color of pixels to white. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time.
3. 1280 X 768 4. 1360 x 768 5. 1366 X 768 6. 1920 X 1080 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz, 1366 x768 @ 60Hz or 1920 x 1080 @ 60Hz.
MENU → → → → ENTER → [ Setup ] → → → → → → → → → → → → ENTER → [ Reset ] Image Reset MENU → → → → ENTER → [ Setup ] → → → → → → → → → .
• ID Input Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated.
• For pivoted PDP Displays, ticker transparency is not supported. • For pivoted PDP Displays, a screen resolution of up to 720*480(SD) is supported for movies. • For drive D:, EWF is not applied. • When the contents of Setup have been changed when EWF is in the Enable state, to save the changes in the disk, you must Commit them.
4. Connect your keyboard and mouse and press the “ALT + F12” keys on your keyboard. 5. The Windows Desktop is displayed and the Magicinfo pro icon (the image will be inserted) appears. Move the cursor over the icon. Note If the Magicinfo icon is not displayed on the notification area, double click the Magicinfo icon on the window desktop.
7. The Player screen of Magicinfo pro is displayed. Note To finish the MagicInfo, press ALT + F12. Photo The JPEG, BMP file format are supported. Adjusting the PDP Display.
Auto Automatically fits the image to the window. Original Shows the properties of the original file. Slide Show Displays the properties of the original file as they are.
Interval Controls the time intervals between image files for a slide show. (5 Sec , 10 Sec , 20 Sec , 30 Sec , 60 Sec ) Rotation Displays an image file by turning it clockwise by 90 degrees.
Zoom Displays a reduced picture. Close Closes the image control Menu. Adjusting the PDP Display.
Music The MP3 file format is supported. Movie The MPEG1, WMV file format are supported. Play Plays a movie file. Adjusting the PDP Display.
Full Size Plays a movie file in full screen. OFFICE / HTML PPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM files are displayed. Note • Install the proper viewer(freeware) program to see the MS Office(Word, Excel, Power Point) or PDF doucuments.
Internet Connects to the Internet Setup Sets various functions in MagicInfo mode. A password must be entered to access Setup mode. Schedule View Displays a schedule.
TCP/IP Changes the TCP/IP settings. Connection Modifies the network settings. Adjusting the PDP Display.
Password The password can be changed. • The password should be between 6 and 12 characters in numeric format. (You should enter a password between 6 and 12 characters in numeric format) • If you enter the wrong password three times, the setup configuration is reset and a warning message appears from the server.
Play Option You can set the repeat play and screen settings. Repeat : Determines the repeat option for playing movies and music. • None - Select No Repeat to play a movie or tune in the list only once. • File Repeat - Select Repeat File to play a movie or tune in the list repeatedly.
Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the PDP Display.
• Do not use benzene, thinner or other flammable sub- stances, or a wet cloth. • We recommend that a SAMSUNG cleansing agent is used to prevent damage to the screen. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly.
A: Check if the signal cable between the computer and the PDP Display is securely con- nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the PDP Display screen and their solutions are listed. Q: The screen is blank and the power indicator is off.
Q: The screen color is inconsistent. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color image is distorted by dark shadows. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color white is poor. A: Adjust color using Custom under OSD Color Adjustment menu.
A: Check the polarities (+/-) of the batteries. A: Check if the batteries are empty. A: Check if the power is on. A: Check if the power cord is securely connected. A: Check if a special fluorescent or neon lamp is on in the vicinity. Problems related to MagicInfo Note Making a Bootable USB Flash Disk.
Set the resolution in the Control Panel → Appearance and Themes → Display → Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). A: Windows ME/2000: Set the resolution at the Control Panel → Display → Screen Saver.
Specifications General General Model Name SyncMaster P50F(N) SyncMaster P63F(N) PDP Panel Size SyncMaster P50F(N) 50 " Diagonal (127 cm) SyncMaster P63F(N) 63 " Diagonal (159 cm) Display area SyncMaster P50F(N) 1105.92 mm (H) X 622.08 mm (V) SyncMaster P63F(N) 1393.
Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz Signal Cable 15pin-to-15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable (Sold separately) Dimensions (W x H x D) / Weight SyncMaster P50F(N) 1204.6x 724.1 x 97.1 mm (47.4 x 28.
Dot Acceptable For example, the number of PDP sub pixels contained in this product are 6,220,800. Note Design and specifications are subject to change without prior notice.
CPU RAM Ethernet OS Application Recommended P3.0 GHz 512 M 100 M / 1 G Windows XP WMP 9 or later PowerSaver This PDP Display has a built-in power management system called PowerSaver. This system saves energy by switching your PDP Display to low-power mode when it has not been used for a certain amount of time.
Display Mode Horizontal Frequency (kHz) Vertical Fre- quency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.
Information For Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for PDP.
Power Off, Screen Saver, or Power Save Mode • Turn the power off for 4 hours after 20 hours in use • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one color or a moving image is recommended.
• Use Bright colors with little difference in luminance. - Cycle : Change the characters color and background color every 30 minutes • Every 30 minutes, change the characters with movement. • All area display Moving image together with Logo periodically.
- Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Pixel • Time Interval : 1 ~ 10 hours ( Recommend : 1 ) • Time Period : 10 ~ 50 second ( Recommend : 50 ) • Apply the Screen Bar function - Symptom: Horizontal / Vertical Bar with Black Color move up and down.
• Time Interval : 1 ~ 10 hours ( Recommend : 1 ) • Time Period : 10 ~ 50 second ( Recommend : 50 ) Note ( Please check CD's User Guide at "OSD Function", some model's will not .
Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG(726-7864) http://www.
Europe BELGIUM 02 201 2418 http://www.samsung.com/be CZECH REPUBLIC 800 - SAMSUNG (800-726786) http://www.samsung.com/cz DENMARK 8 - SAMSUNG (7267864) http://www.samsung.com/dk EIRE 0818 717 100 http://www.samsung.com/ie FINLAND 30 - 6227 515 http://www.
Asia Pacific AUSTRALIA 1300 362 603 http://www.samsung.com/au CHINA 800-810-5858 400-810-5858 010-6475 1880 http://www.samsung.com/cn HONG KONG:3698 - 4698 http://www.samsung.com/hk INDIA 3030 8282 1800 110011 1-800-3000-8282 http://www.samsung.com/in INDONESIA 0800-112-8888 http://www.
Interlace and Non-Interlace Methods Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image.
Reproduction in any manner whatsoever without the written permission of Samsung Elec- tronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this ma- terial.
デバイスSamsung P63FNの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samsung P63FNをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung P63FNの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung P63FNの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung P63FNで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung P63FNを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung P63FNの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung P63FNに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung P63FNデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。