SamsungメーカーPE43H4500AWの使用説明書/サービス説明書
ページ先へ移動 of 123
▶ ❑ Using the INFO button (Now & Next guide) The display identifies the curr ent channel and the status of certain audio-video settings. The Now & Next guide shows daily TV pr ogramme information for each channel accor ding to the br oadcasting time.
◀ ▶ ❑ Memorizing channels ■ Aerial O MENU m → Br oadcasting → Aerial → ENTER E Befor e your television can begin memorising the available channels, you must specify the type of signal sour ce that is connected to the TV .
◀ ▶ ■ Auto T uning (depending on the country) O MENU m → Br oadcasting → Auto T uning → ENTER E N Automatically allocated pr ogramme numbers may not corr espond to actual or desir ed pr ogramme numbers. If a channel is locked, the PIN input window appears.
◀ ▶ When selecting Cable → Digital & Analogue , Digital or Analogue – Operator Selection (depending on the country): Selects a pr ovider of cable services. – Sear ch Mode : Scans for all channels with active br oadcast stations and stor es them in the TV .
◀ ▶ ● Fr equency : Displays the fr equency for the channel (dif fers in each country). ● Modulation : Displays available modulation values. ● Symbol Rate : Displays available symbol rates.
◀ ▶ ❑ Using the Channel menu O MENU m → Br oadcasting → Channel List → ENTER E ■ Channel List The Channel List contains the channels your TV displays when you pr ess the channel button. Y ou can view channel information, All , TV , Radio , Data/Other , Analogue or Favourites 1-5 .
◀ ▶ Channel Sorting ● Number / Name : Arranges the channel or der accor ding to channel number or name on the list. Channel Mode ● Aerial : Switches to Air or Cable . ● Edit Favourites : Set channels you watch fr equently as favourites. N For detailed information about using Edit Favourites , r efer to “ Edit Favourites ”.
◀ ▶ ● All : Shows all curr ently available channels. ● TV : Shows all curr ently available TV channels. ● Radio : Shows all curr ently radio channels. ● Data/Other : Shows all curr ently available MHP or other channels. ● Analogue : Shows all curr ently available analogue channels.
◀ ▶ ■ Guide O MENU m → Br oadcasting → Guide → ENTER E The EPG (Electr onic Pr ogramme Guide) information is pr ovided by br oadcasters. Using pr ogramme schedules pr ovided by br oadcaste.
◀ ▶ ■ Schedule Manager O MENU m → Br oadcasting → Schedule Manager → ENTER E Y ou can set a desir ed channel to be displayed automatically at the intended time. In addition, you can view , modify or delete a channel you have r eserved to watch.
◀ ▶ ● Repeat : Select Once , Manual , Sat~Sun , Mon~Fri or Everyday to set at your convenience. If you select Manual , you can set the day you want. N The ( c ) mark indicates the day you’ve selected. ● Date : Y ou can set the desir ed date.
◀ ▶ ■ Edit Channel O MENU m → Br oadcasting → Edit Channel → ENTER E Y ou can edit or delete channels. 1. Go to Edit Channel scr een. 2. Pr ess the ▲/▼ buttons to select the desir ed channel, then pr ess the ENTER E button. The ( c ) mark indicates the channel you’ve selected.
◀ ▶ N Using the colour ed and function buttons with the Edit Channel . ● a Red ( Change Number ): Changes channel or der on the channel list. – E ( Done ): Completes changing the channel or der . N Digital channel does not support this function when the Edit Channel Number (depending on the country) is set to Disable .
◀ ▶ ● } Blue ( Select All / Deselect All ): Selects or deselects all channels at once. ● ( Go T o ): Goes to channel dir ectly by pr essing numbers (0~9). ● k ( Page ): Move to pr evious or next page. ● T ( T ools ): Displays the option menu.
◀ ▶ – Category : Change the channel mode to All , TV , Radio , Data/Other , Analogue , Recently Viewed , Most V iewed . The selected channel mode is displayed. – Edit Favourites : Go to Edit Favourites scr een dir ectly. – Rename channel (analogue channels only): Assign a name of up to five characters to a channel.
◀ ▶ ■ Edit Favourites t O MENU m → Br oadcasting → Edit Favourites → ENTER E Y ou can add, edit or delete favourite channels. 1. Go to Edit Favourites scr een. 2. Pr ess the ▲/▼ buttons to select the desir ed channel, and then pr ess ENTER E button.
◀ ▶ N Using the colour ed and function buttons with the Edit Favourites . ● a Red ( Category / Change or der ) – Category : Changes the channel mode to All , TV , Radio , Analogue , Data/Other , Recently Viewed , Most V iewed . The selected channel mode is displayed.
◀ ▶ ● b Gr een ( Change Fav . ): Changes favourite list among Favourites 1-5 . ● { Y ellow ( Select All / Deselect All ): Selects or deselects all channels at once. ● } Blue ( Add / Delete ) – Add : Adds selected channels to Favourites 1-5 .
◀ ▶ ● ( Go T o ): Goes to channel dir ectly by pr essing numbers (0~9). ● k ( Page ): Move to pr evious or next page. ● T ( T ools ): Displays the option menu. The option menu items that appear may dif fer depending on the channel status and type.
◀ ▶ ❑ Locking Pr ogramme ■ Pr ogramme Rating Lock (depending on the country) O MENU m → Br oadcasting → Pr ogramme Rating Lock → ENTER E Pr event unauthorised users, such as childr en, fr om watching unsuitable pr ogramme with a user -defined 4-digit PIN code.
◀ ▶ ■ Channel Lock O MENU m → Br oadcasting → Channel Lock → ENTER E Lock channels in Channel menu to pr event unauthorised users, such as childr en, fr om watching unsuitable pr ogramme.
◀ ▶ ❑ Other Featur es ■ Channel Settings O MENU m → Br oadcasting → Channel Settings → ENTER E ● Country (Ar ea) (depending on the country) The PIN input scr een appears. Enter your 4 digit PIN number . Digital Channel : Change the country for digital channels.
◀ ▶ ● Manual T uning Scans for a channel manually and stor es in the TV . N If a channel is locked, the PIN input window appears. N Accor ding to the channel sour ce, Manual T uning may be supported. ● Digital Channel T uning : Scans for a digital channel manually and stor es in the TV .
◀ ▶ ● Analogue Channel T uning : Scans for an analogue channel. Pr ess the New button to sear ch the channels by adjusting the Pr ogramme , Colour System , Sound System , Channel , Sear ch .
◀ ▶ ● Fine T une (analogue channels only) If the signal is weak or distorted, fine tune the channel manually. N Fine tuned channels ar e marked with an asterisk “*”. N T o r eset the fine-tuning, select Reset . ● T ransfer Channel List (depending on the country) Imports or exports the channel map.
◀ ▶ ■ Subtitle t O MENU m → Br oadcasting → Subtitle → ENTER E Use this menu to set the Subtitle mode. ● Subtitle : Switches subtitles on or of f. ● Subtitle Mode : Sets the subtitle mode. ● Subtitle Language : Sets the subtitle language.
◀ ▶ N English is the default in cases wher e the selected language is unavailable in the br oadcast. ● Primary Subtitle : Sets the primary subtitle.
◀ ▶ ■ Audio Options (digital channels only) O MENU m → Br oadcasting → Audio Options → ENTER E ● Audio Language t Change the default value for audio languages. Primary Audio / Secondary Audio : Y ou can set the primary or secondary audio.
◀ ▶ ● Audio Format When sound is emitted fr om both the main speaker and the audio r eceiver , a sound echo may occur due to the decoding speed dif fer ence between the main speaker and the audio r eceiver . In this case, use the TV Speaker function.
◀ ▶ ■ T eletext Language (depending on the country) O MENU m → Br oadcasting → T eletext Language → ENTER E ● T eletext Language N English is the default in cases wher e the selected language is unavailable in the br oadcast.
◀ ▶ ■ Digital T ext (UK only) O MENU m → Br oadcasting → Digital T ext → ENTER E If the pr ogramme br oadcasts with digital text, this featur e is enabled. N MHEG (Multimedia and Hypermedia Information Coding Experts Gr oup) An Inter national standar d for data encoding systems used in multimedia and hypermedia.
◀ ▶ ■ Common Interface O MENU m → Br oadcasting → Common Interface → ENTER E ● CI Menu : This enables the user to select fr om the CAM-pr ovided menu. Select the CI Menu based on the menu CI CARD. ● CAM video transcoding : Y ou can configur e the setting to transcode the video codec fr om the CAM automatically.
◀ ▶ ● Application Info : View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. Y ou can install the CAM anytime whether the TV is on or of f. 1. Pur chase a CI CAM module at your near est dealer or by phone.
◀ ▶ ❑ Changing the Pr eset Pictur e Mode ■ Pictur e Mode t O MENU m → Pictur e → Pictur e Mode → ENTER E Select your pr eferr ed pictur e type. N When connecting a PC, you can only make changes to the Entertain and Standar d . ● Dynamic : Suitable for a bright r oom.
◀ ▶ ❑ Adjusting Pictur e Settings ■ Samsung MagicAngle for LED 19", 22" models O MENU m → Pictur e → Samsung MagicAngle → ENTER E Adjust scr een viewing Angle to optimise scr een quality accor ding to your viewing position.
◀ ▶ O ff : Select when viewing fr om the fr ont position. Lean Back Mode : Select when viewing fr om a slightly lower position. Standing Mode : Select when viewing fr om the upper position. ● Mode : Adjust scr een viewing angle. N When Samsung MagicAngle is set to Lean Back Mode or Standing Mode , Gamma is not available.
◀ ▶ ■ Backlight for LED TV / Cell Light for PDP TV / Contrast / Brightness / Sharpness / Colour / Tint (G/R) Y our television has several setting options for pictur e quality contr ol. N NOTE ● In analogue TV , Ext. , AV modes of the P AL system, the Tint (G/R) function is not available.
◀ ▶ ■ Pictur e Size O MENU m → Pictur e → Pictur e Size → ENTER E Set the various pictur e options such as pictur e size and aspect ratio. N The available items may dif fer depending on the selected mode. N Depending on the input sour ce, the pictur e size options may vary.
◀ ▶ Wide Zoom : Magnifies the pictur e size mor e than 4:3. N Adjusts the Position by using ▲ , ▼ buttons. Zoom : Magnifies the 16:9 wide pictur es vertically to fit the scr een size. N Adjusts the Zoom or Position by using ▲ , ▼ button. 4:3 : Sets the pictur e to basic (4:3) mode.
◀ ▶ ● Smart View 1 for LED 5 series 32" and above : Reduces the 16:9 pictur e by 50%. ● Smart View 2 for LED 5 series 32" and above : Reduces the 16:9 pictur e by 25%. N NOTE ● Smart View 1 for LED 5 series 32" and above is enabled only in HDMI mode.
◀ ▶ N NOTE ● After selecting Scr een Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode, you may need to centr e the pictur e: 1. Select the Position . Pr ess the ENTER E button. 2. Pr ess the ▲ , ▼ , ◄ or ► button to move the pictur e.
◀ ▶ ■ PIP t O MENU m → Pictur e → PIP → ENTER E Y ou can watch the TV tuner and one exter nal video sour ce simultaneously. For example, if you have a cable box connected to the Cable In jack, you can use PIP to watch pr ograms fr om the cable box and watch a movie fr om a Blu-ray player attached to the HDMI In jack.
◀ ▶ ● PIP settings Main pictur e Sub pictur e Component, HDMI, HDMI2/DVI TV ● PIP : Activate or deactivate the PIP function. ● Aerial : Select either Air or Cable as the input sour ce for the sub-scr een. ● Channel : Select the channel for the sub-scr een.
◀ ▶ ❑ Changing the Pictur e Options ■ Advanced Settings O MENU m → Pictur e → Advanced Settings → ENTER E (available in Standar d / Movie mode) Y ou can adjust the detailed setting for the scr een including colour and contrast. N When connecting a PC, you can only make changes to the White Balance and Gamma .
◀ ▶ ● RGB Only Mode : Displays the Red, Gr een and Blue colour for making fine adjustments to the hue and saturation. ● Colour Space : Adjust the range of colours available to cr eate the image. N T o adjust Colour , Red , Gr een , Blue and Reset , set Colour Space to Custom .
◀ ▶ 10 Point for PDP TV : Y ou can adjust the white balance by adjusting the brightness of each of the 10 sections of r ed, gr een, and blue colours of the input signal. T o choose a section, select a desir ed section in Level field. N Y ou can use the 10 Point function only when the Pictur e Mode is set to Movie .
◀ ▶ ● Gamma : Adjust the primary colour intensity. ● Motion Lighting : Reduce power consumption by brightness contr ol adapted motion. N This function is not supported in 3D mode.
◀ ▶ ■ Pictur e Options O MENU m → Pictur e → Pictur e Options → ENTER E N When connecting a PC, you can only make changes to the Colour T one . ● Colour T one N W arm1 or W arm2 will be deactivated when the pictur e mode is Dynamic . N Settings can be adjusted and stor ed for each exter nal device connected to an input on the TV .
◀ ▶ Auto Visualisation : When changing analogue channels, displays signal str ength. N Only available for analogue channels. N When the INFO button is pr essed, the signal str ength bar is displayed. N When bar is gr een, you ar e r eceiving the best possible signal.
◀ ▶ ● Film Mode : Sets the TV to automatically sense and pr ocess film signals fr om all sour ces and adjust the pictur e for optimum quality. N The Cinema Smooth function is only activated when HDMI 24Hz signal is inputted.
◀ ▶ ● LED Clear Motion for LED TV : Removes drag fr om fast scenes with a lot of movement to pr ovide a clear pictur e. N It will be deactivated when the pictur e mode is set to Natural . N The scr een may become slightly darker when you play LED Clear Motion .
◀ ▶ ■ Pictur e Of f t O MENU m → Pictur e → Pictur e Of f → ENTER E The scr een is tur ned of f but the sound r emains on. Pr ess any button except volume button to tur n on the scr een. ■ Reset Pictur e O MENU m → Pictur e → Reset Pictur e → ENTER E Resets your curr ent pictur e mode to its default settings.
◀ ▶ ❑ Changing the Pr eset Sound Mode ■ Sound Mode O MENU m → Sound → Sound Mode → ENTER E ● Standar d : Selects the normal sound mode. ● Music : Emphasises music over voices. ● Movie : Pr ovides the best sound for movies. ● Clear V oice : Emphasises voices over other sounds.
◀ ▶ ❑ Adjusting Sound Settings ■ Sound Ef fect (standar d sound mode only) O MENU m → Sound → Sound Ef fect → ENTER E ● DTS T ruSurr ound This function pr ovides a virtual 5.1 channel surr ound sound experience thr ough a pair of speakers using HRTF (Head Related T ransfer Function) technology.
◀ ▶ ● Equaliser Use Equaliser to customize sound setting for each speaker . Balance : Adjusts the balance between the right and left speaker . 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth fr equencies.
◀ ▶ ■ 3D Audio for PDP 4900 O MENU m → Sound → 3D Audio → ENTER E 3D audio technology pr ovides the immersive sound corr esponding to the pop-up ef fect of 3D video by audio depth contr ol in perspective. N A vailable in only when watching 3D image.
◀ ▶ ■ Speaker Settings O MENU m → Sound → Speaker Settings → ENTER E ● Speaker Select t A sound echo may occur due to a dif fer ence in decoding speed between the main speaker and the audio r eceiver . In this case, set the TV to Exter nal Speaker .
◀ ▶ N When Speaker Select is set to Exter nal Speaker . ● TV Speaker : Of f, Exter nal Speaker : On N When Speaker Select is set to TV Speaker . ● TV Speaker : On, Exter nal Speaker : On N If ther e is no video signal, both speakers will be mute.
◀ ▶ ● Auto V olume T o equalize the volume level on each channel, set to Normal . Night : This mode pr ovides an impr oved sound experience compar ed to Normal mode, making almost no noise. It is useful at night. N T o use the volume contr ol on the sour ce device connected to the TV , set Auto V olume to O ff on the TV .
◀ ▶ ■ Additional Settings O MENU m → Sound → Additional Settings → ENTER E ● DTV Audio Level (digital channels only): This function allows you to r educe the disparity of a voice signal (which is one of the signals r eceived during a digital TV br oadcast) to a desir ed level.
◀ ▶ ● Digital Audio Out : Digital Audio out is used to pr ovide digital sound, r educing interfer ence going to speakers and various digital devices such as a DVD player . Audio Format : Y ou can select the Digital Audio output format. The available Digital Audio output format may dif fer depending on the input sour ce.
◀ ▶ ● Dolby Digital Comp : This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, A TV Sound). N Select Line to obtain dynamic sound, and RF to r educe the dif fer ence between loud and soft sounds at night time.
◀ ▶ ❑ Selecting the Sound Mode t When you set to Dual I-II , the curr ent sound mode is displayed on the scr een. Audio T ype Dual I-II Default A2 Ster eo Mono Mono Automatic change Ster eo Ster.
◀ ▶ Pr efer ence Featur es ❑ Executing initial setup ■ Setup O MENU m → System → Setup → ENTER E Configur e the channels and the time when setting up the TV for the first time or when r esetting the unit. N Execute the initial setup following instructions that the TV guides.
◀ ▶ ❑ Setting the Time ■ Time O MENU m → System → Time → ENTER E The curr ent time will appear every time you pr ess the INFO button. ● Clock : Setting the clock is for using various timer featur es of the TV . N If you disconnect the power cor d, you have to set the clock again.
◀ ▶ N The aerial must be connected in or der to set the time automatically. – Manual : Set the curr ent time manually. N Depending on the br oadcast station and signal, the auto time set up may not be corr ect. In this case, set the time manually.
◀ ▶ Clock Set : Set the Date and Time . N A vailable only when Clock Mode is set to Manual . N Y ou can set the Date and Time dir ectly by pr essing the number buttons on the r emote contr ol. Time Zone (depending on the country): Select your time zone.
◀ ▶ Time Of fset (depending on the country): Adjusts the time when your TV r eceives the time information via Inter net. Set the right time by selecting an of fset. N The curr ent time will be set thr ough a network, if the TV fails to r eceive the time information including the br oadcast signal fr om TV stations.
◀ ▶ ❑ Using the Sleep Timer O MENU m → System → Time → Sleep Timer → ENTER E ● Sleep Timer t : Automatically shuts of f the TV after a pr eset period of time. (30, 60, 90, 120, 150 and 180 minutes) N Use the ▲ / ▼ buttons to select a period of time, and then pr ess ENTER E .
◀ ▶ ❑ Setting the On / Of f Timer O MENU m → System → Time → On Timer <or> Of f Timer → ENTER E ● On Timer : Y ou can set up thr ee separate On Timer configurations. ( On Timer 1 , On Timer 2 , On Timer 3 ) Setup : Select O ff , Once , Everyday , Mon~Fri , Mon~Sat , Sat~Sun or Manual to set at your convenience.
◀ ▶ Sour ce : T o select the sour ce of the content that will play when the TV tur ns on. Y ou can: – Select TV and have the TV display a specific air or cable channel. – Select USB and have the TV play back photo or audio files fr om a USB device.
◀ ▶ N If you select a sour ce other than TV or USB , you must: ● Have a cable or satellite set-top box attached to that sour ce ● Set the set-top box to the channel you want to watch when the TV goes on ● Leave the set-top box tur ned on. N When you select a sour ce other than TV or USB , the Aerial and Channel options will disappear .
◀ ▶ Music / Photo (when the Sour ce is set to USB ): Select a folder in the USB device containing music or photo files to be played when the TV is tur ned on automatically. – If ther e is no music file on the USB device or the folder containing a music file is not selected, the timer function does not operate corr ectly.
◀ ▶ – It is r ecommended that you use a USB memory stick and a multi car d r eader when using On Timer . – The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufactur ers because these devices take a long time to be r ecognised.
◀ ▶ ❑ Economical Solutions ■ Eco Solution O MENU m → System → Eco Solution → ENTER E ● Energy Saving : This adjusts the brightness of the TV in or der to r educe power consumption.
◀ ▶ Min. Backlight for LED TV / Min Cell Light for PDP TV : When Eco Sensor is On , the minimum scr een brightness can be adjusted manually. N If Eco Sensor is On , the display brightness may change (become slightly darker or brighter) depending on the surr ounding light intensity.
◀ ▶ ❑ Other Featur es ■ Menu Language O MENU m → System → Menu Language → ENTER E Set the menu language. ■ Auto Pr otection Time for LED TV O MENU m → System → Auto Pr otection Tim.
◀ ▶ ■ Scr een Bur n Pr otection for PDP TV O MENU m → System → Scr een Bur n Pr otection → ENTER E T o r educe the possibility of scr een bur n, this unit is equipped with Pixel Shift scr een bur n pr evention technology. Pixel Shift moves the pictur e slightly on the scr een.
◀ ▶ ◀ ▶ ● Pixel Shift : Using this function, you can set the TV to move pixels minutely on the PDP scr een in a horizontal or vertical dir ection to minimize after images on the scr een.
◀ ▶ ● Scr olling : This function r emoves after -images on the scr een by illuminating all the pixels on the PDP accor ding to a patter n. Use this function when ther e ar e after images or symbols on the scr een, especially when you displayed a still image on the scr een for a long time.
◀ ▶ ■ General O MENU m → System → General → ENTER E ● Game Mode : When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a mor e r ealistic gaming experience by selecting game mode.
◀ ▶ ● Game Mode is not available in TV mode. ● After connecting the game console, set Game Mode to On . Unfortunately, you may notice r educed pictur e quality. ● If Game Mode is On : – Pictur e Mode is set to Standar d and Sound Mode is set to Movie .
◀ ▶ ■ Change PIN O MENU m → System → Change PIN → ENTER E Change your passwor d r equir ed to set up the TV . N The PIN input scr een appears befor e the setup scr een.
◀ ▶ ■ DivX® Video On Demand O MENU m → System → DivX® Video On Demand → ENTER E Shows the r egistration code authorised for the TV . If you connect to the DivX web site and r egister with 10-digit r egistration code, you can download the VOD activation file.
◀ ▶ Advanced Featur es ❑ Using the Sour ce List ■ Sour ce List O MENU m → Applications → Sour ce List → ENTER E N When you pr ess the SOURCE button, Sour ce scr een will be displayed at once. N Y ou can only choose exter nal devices that ar e connected to the TV .
◀ ▶ ❑ Connecting a USB Device 1. T ur n on your TV . 2. Connect a USB device containing photo, music and movie files to the USB port on the side of the TV . 3. When USB is connected to the TV , popup window appears. Y ou can select the Photos , Videos or Music directly.
◀ ▶ N It might not work pr operly with unlicenced multimedia files. N Need-to-Know List befor e using Media Contents ● MTP (Media T ransfer Pr otocol) is not supported. ● Supported file systems ar e F A T and exF A T . ● Certain types of USB Digital camera and audio devices may not be compatible with this TV .
◀ ▶ ● Befor e connecting your device to the TV , please back up your files to pr event them fr om damage or loss of data. SAMSUNG is not r esponsible for any data file damage or data loss. ● Do not disconnect the USB device while it is loading.
◀ ▶ ● MP3 files with DRM that have been downloaded fr om a non-fr ee site cannot be played. Digital Rights Management (DRM) is a technology that supports the cr eation, distribution and manageme.
◀ ▶ ● If a USB extension cable is used, the USB device may not be r ecognised or the files on the device may not be r ead. ● If a USB device connected to the TV is not r ecognised, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection.
◀ ▶ Disconnecting a USB Device 1. Pr ess the SOURCE button. 2. Select a desir ed USB device, and then pr ess the TOOLS button. The T ools menu appears. 3. Select Disconnect USB Device , and then wait until the selected USB device is disconnected. Y ou can r emove a USB device fr om the TV .
◀ ▶ ❑ Using the Media Contents O MENU m → Applications → Media Play → ENTER E Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC) device. 1. Pr ess the MEDIA.P button. 2. Pr ess ◄/► button to select desir ed menu ( Photos , Videos , Music ), then pr ess the ENTER E button.
◀ ▶ Playing the selected files 1. Pr ess the ▲ button to select Options at the top of each main scr een and select Play Selected . 2. Select the desir ed files. N The check box appears to the left of the selected files. N Pr ess ENTER E button again to deselect the file.
◀ ▶ ❑ Playing the Photos / V ideos / Music During playing a file, pr ess the ▲/▼/◄/► button to select the desir ed menu. N When the option menu is not displayed, pr ess the TOOLS button or ENTER E button. N Y ou can also use ∂ / ∑ / ∫ / π / µ buttons on the r emote contr ol during playback.
◀ ▶ Playback menu Button Operation Photos Videos Music / Pr evious / Next ● / Start Slide Show / Stop Slide Show ● Play / Pause Mini Player* ● ● / Pr evious / Next Mini Player* ● ● / Rewind / Fast Forwar d ● ● * When setting the Backgr ound Music to Mini Player in Photos , these buttons previous appear .
◀ ▶ Setting menu ● Photos Button Operation Slideshow Settings Y ou can set the Speed and Ef fects during the slide show . Zoom Y ou can zoom the image. Rotate Y ou can r otate images in full screen mode. Backgr ound Music / Mini Player Y ou can set backgr ound music when watching a slide show .
◀ ▶ N During the slide show , all files in the file list will be displayed in or der . N When you pr ess the ∂ (Play) button (or ▲ button → Options → Slide Show ) in the file list, slide show will be started immediately. N During the slide show , you can adjust the slide show speed using π (REW) or µ (FF) button.
◀ ▶ ● Videos Button Operation Sear ch Sear ch Titles : Y ou can move the other file directly. Sear ch Time Bar : Y ou can search the video using ◄ and ► button at one minute interval or entering the number dir ectly. N It may not be supported depending on the input sour ce.
◀ ▶ Button Operation Settings Subtitle Settings : Y ou can play the video with subtitles. This function only works if the subtitles ar e the same file name as the video. Pictur e Mode / Sound Mode : Y ou can adjust the picture or sound setting. Audio Language : Y ou can change the audio language if the video has mor e than one language.
◀ ▶ N If video time information is unknown, play time and pr ogr ess bar ar e not displayed. N In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. ● Supported Subtitle / Video Formats N For the details, r efer to “Specifications” in User Manual.
◀ ▶ ● Music Button Operation Repeat Y ou can play music files r epeatedly. Shuf fle Y ou can play the music randomly. Sound Mode Y ou can adjust the sound setting. N Only displays the files with supported music file extension. Other file extensions ar e not displayed, even if they ar e saved on the same USB device.
◀ ▶ Setting the Encoding language Set the encoding language if the text is not supported. 1. Pr ess the ▲ button to select Options at the top of music main scr een and select Encoding .
◀ ▶ ❑ Using the 3D function for PDP 4900 Viewing TV using the 3D function IMPORT ANT HEAL TH AND SAFETY INFORMA TION FOR 3D PICTURES. Read and understand the following safety information befor e using the TV’ s 3D function. [ W ARNING ● Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches.
◀ ▶ ● A r esponsible adult should fr equently check on childr en who ar e using the 3D function. If ther e ar e any r eports of tir ed eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and r est. ● Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, pr otective goggles, etc.
◀ ▶ ● The 3D Active Glasses may not work pr operly if ther e is any other 3D pr oduct or electr onic devices tur ned on near the glasses or TV . If ther e is a pr oblem, keep other electr onic devices as far away as possible fr om the 3D Active Glasses.
◀ ▶ ■ 3D O MENU m → Pictur e → 3D → ENTER E This exciting new featur e enables you to view 3D content. N "Full HD 3D Glasses™" Logo indicates compatibility between display pr o.
◀ ▶ ● 3D Mode If you want to feel the 3D ef fect fully, please wear the 3D Active Glasses first, and then select 3D Mode fr om the list below that pr ovides the best 3D viewing experience. 3D Mode Operation Off Off O ff T ur ns the 3D function of f.
◀ ▶ ● 3D Perspective : Adjust overall 3D perspective of on-scr een image. ● Depth : Adjust overall depth. ● L/R Change : Swap the left and right pictur es. ● 3D → 2D : Displays the image for the left eye only. N This function is deactivated when 3D Mode set to “ ” or “ Off Off ”.
◀ ▶ Support r esolution (16:9 only) ● HDMI Sour ce Resolution Fr equency (Hz) / 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz Frame Packing 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.
◀ ▶ ● Components & DTV Sour ce Resolution Fr equency (Hz) Components 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz DTV 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.
◀ ▶ ❑ V iewing the e-Manual ■ e-Manual O MENU m → Support → e-Manual → ENTER E Y ou can r ead the intr oduction and instructions about the TV featur es stor ed in your TV . N For the detailed information about e-Manual Scr een, r efer to “How to use the e-Manual” in User Manual.
◀ ▶ ❑ Using the Self Diagnosis ■ Self Diagnosis O MENU m → Support → Self Diagnosis → ENTER E N Self Diagnosis might take few seconds, this is part of the normal operation of the TV . ● Pictur e T est : Use to check for pictur e pr oblems.
◀ ▶ N The melody will be hear d during the test even if Speaker Select is set to Exter nal Speaker or the sound is muted by pr essing the MUTE button. ● Signal Information (digital channels only): HDTV channel’ s r eception quality is either perfect or the channels ar e unavailable.
◀ ▶ ❑ Updating the Softwar e ■ Softwar e Update O MENU m → Support → Softwar e Update → ENTER E The Softwar e Update menu lets you upgrade your TV’ s softwar e to the latest version. N When softwar e is upgraded, video and audio settings you have made will r etur n to their default settings.
◀ ▶ ● Update now The TV's firmwar e can be updated thr ough either USB connection or br oadcast signal. – By USB: Insert a USB drive containing the firmwar e upgrade file, downloaded fr om “www .samsung.com” into the TV . N Please be car eful not to disconnect the power or r emove the USB drive until upgrades ar e complete.
◀ ▶ – By Channel: Upgrade the softwar e using the br oadcasting signal. N If the function is selected during the softwar e transmission period, softwar e will be automatically sear ched and downloaded. N The time r equir ed to download the softwar e is determined by the signal status.
◀ ▶ ❑ Changing the Use Mode ■ Use Mode O MENU m → Support → Use Mode → ENTER E Select the Use Mode suitable for your place. W e str ongly r ecommend you select Home Use . ● Home Use : Home Use is the default setting. ● Stor e Demo : Stor e Demo is for r etail envir onments only.
◀ ▶ ❑ V iewing the Contact Samsung ■ Contact Samsung O MENU m → Support → Contact Samsung → ENTER E View this information when your TV does not work properly or when you want to upgrade the softwar e. Y ou can find information r egar ding our call centr es, and how to download pr oducts and softwar e.
◀ ▶ ❑ Using the Football Mode ■ Football Mode t O MENU m → Applications → Football Mode → ENTER E This mode pr ovides optimised condition for watching sports games. ● a ( Zoom ): Pause playback and divide the pictur e into 9 parts. Select a part to zoom it in.
◀ ▶ ❑ Using the Satellite System for LED 5070 / 5270 / 4270 series N For the details, you can find an additional web manual on our website "www .
◀ ▶ ❑ Using the Wir eless Network for LED 5000 series (UK only) / for PDP 4900 series N For the details, you can find an additional web manual on our website "www .
◀ ▶ ❑ Managing the Network Connected Devices for PDP 4900 series N For the details, you can find an additional web manual on our website "www .
◀ ❑ Using the DLNA Functions for PDP 4900 series N For the details, you can find an additional web manual on our website "www . samsung.com".
デバイスSamsung PE43H4500AWの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samsung PE43H4500AWをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung PE43H4500AWの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung PE43H4500AWの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung PE43H4500AWで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung PE43H4500AWを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung PE43H4500AWの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung PE43H4500AWに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung PE43H4500AWデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。