SamsungメーカーPS51D495の使用説明書/サービス説明書
ページ先へ移動 of 223
E - M A N U A L imagine the possibilities Thank you for purchasing this Samsung product. T o receive more complete service, please register your product at www .
Contents Channel • Using the INFO button (Now & Next guide) 3 • Using the Channel Menu 4 • Using the Channel 14 • Memorising Channels 20 • Using the Channel (for Satellite.
▶ English ❑ Using the INFO button (Now & Next guide) The display identifies the curr ent channel and the status of certain audio-video settings. The Now & Next guide shows daily TV pr ogramme information for each channel accor ding to the br oadcasting time.
◀ ▶ ◀ English ❑ Using the Channel Menu Pr ess the CONTENT button to select W atch TV , and then select the menu you want to use. Each scr een will be displayed.
▶ ◀ ▶ English ■ Guide The EPG (Electr onic Pr ogramme Guide) information is pr ovided by broadcasters. Using pr ogramme schedules pr ovided by br oadcasters, you can specify pr ogrammes you want to watch in advance so that the channel automatically changes to the selected pr ogramme channel at the specified time.
◀ ▶ ◀ English Using Channel View a Red ( Sche. Mgr ): Displays the Schedule Manager . b Gr een ( -24 Hours ): Viewing the list of pr ogrammes to be br oadcasted befor e 24 hours. { Y ellow ( +24 Hours ): Viewing the list of pr ogrammes to be br oadcasted after 24 hours.
▶ ◀ ▶ English } Blue ( Ch.Mode ): Select the type of channels you want to display on the Channel View window . ; Information : Displays details of the selected pr ogramme. k Page : Move to next or pr evious page. E W atch / Schedule : When selecting the curr ent pr ogramme, you can watch the selected pr ogramme.
◀ ▶ ◀ English ■ Schedule Manager O CONTENT → Schedule Manager → ENTER E Y ou can view , modify or delete a channel you have r eserved to watch. Using the Timer Viewing Y ou can set a desir ed channel to be displayed automatically at the intended time.
▶ ◀ ▶ English 3. Pr ess the l / r / u / d buttons to set the Antenna , Channel , Repeat , Date or Start Time . ● Antenna : Select the desir ed antenna sour ce. ● Channel : Select the desir ed channel. ● Repeat : Select Once , Manual , Sat~Sun , Mon~Fri or Everyday to set at your convenience.
◀ ▶ ◀ English ● Start Time : Y ou can set the start time you want. N Pr ess INFO to enter Detailed Information . On the Detailed Information scr een, you can change or cancel a r eserved information. ● Cancel Schedules : Cancel a show you have r eserved to watch.
▶ ◀ ▶ English ■ Channel List Y ou can view all the channel sear ched. O When you pr ess the CH LIST button on the r emote contr ol, Channel List scr een will be displayed at once. O Using the operation buttons with the Channel List . ● a Red ( Antenna ): Select the desir ed antenna sour ce.
◀ ▶ ◀ English ● l r Ch. Mode / Channel : Move to the type of channels you want to display on the Channel List scr een / Change channels. N The option may dif fer depending on country. ● E W atch / Information : W atches the channel you select / Displays details of the selected pr ogramme.
▶ ◀ ▶ English How to use Timer Viewing in Channel List (digital channels only) When you set the Timer Viewing in Channel List , you can only set the programme in Pr ogramme View . 1. Pr ess the CH LIST button, then select a desir ed digital channel.
◀ ▶ ◀ English ❑ Using the Channel ■ Channel Manager O CONTENT → Channel Manager → ENTER E Edit the favourite channel and set the channels to Delete , Deselect All or Select All . Y ou can edit the channel name only for analogue channels.
▶ ◀ ▶ English ● ( ( ) Channels : Select a channel in the All , TV , Radio , Data/Other , Analogue scr een. Change the antenna, or channel settings using the menus in the top right cor ner of the scr een. ● ( ( ) Favourites 1 to 5 : Shows favourite channels.
◀ ▶ ◀ English Channel Status Display Icons Icon Operations a An analogue channel. c A channel selected. F A channel set as a favourite. Channel Manager Option Menu t Set each channel using the C.
▶ ◀ ▶ English 1. Select a channel and pr ess the TOOLS button. 2. Select a function and change its settings. ● W atch : W atch the selected channel. ● Add to Favourites / Edit Favourites : Set channels you watch fr equently as favourites / Add or Delete the selected channel in Favourites 1-5 .
◀ ▶ ◀ English 2. Pr ess the ENTER E button to select Favourites 1 to 5 , then pr ess the OK button. N One favourite channel can be added in several of Favourites among Favourites 1 to 5 . ● Lock / Unlock : Lock a channel so that the channel cannot be selected and viewed.
▶ ◀ ▶ English ● Edit Channel Name (analogue channels only): Assign your own channel name. N This function may not support depending on the r egion. ● Edit Channel Number : Edit the number by pr essing the number buttons desir ed. N This function may not support depending on the r egion.
◀ ▶ ◀ English ❑ Memorising Channels O MENU m → Channel → ENTER E ■ Antenna t N The option may dif fer depending on country. Befor e your television can begin memorizing the available channels, you must specify the type of signal sour ce that is connected to the TV .
▶ ◀ ▶ English ■ Country (depending on the country) N The PIN input scr een appears. Enter your 4 digit PIN number . N Select your country so that the TV can corr ectly auto-tune the br oadcasting channels. ● Digital Channel : Change the country for digital channels.
◀ ▶ ◀ English ● Antenna Sour ce : Select the antenna sour ce to memorise. The option may dif fer depending on country. ● Digital & Analogue / Digital / Analogue : Select the channel sour ce to memorise. When selecting Cable → Digital & Analogue or Digital : Pr ovide a value to scan for cable channels.
▶ ◀ ▶ English ● Network ID : When Network is Manual , you can set up Network ID using the numeric buttons. ● Fr equency : Displays the fr equency for the channel. (dif fers in each country) ● Modulation : Displays available modulation values.
◀ ▶ ◀ English ■ Manual T uning Scans for a channel manually and stor es in the TV . N If a channel is locked using the Channel Lock function, the PIN input window appears. ● Digital Channel T uning : Scans for a digital channel. 1. Pr ess the a button to select New .
▶ ◀ ▶ English 2. Pr ess the d button to select Sear ch . When scanning has finished, a channel is updated in the channel list. ● Analogue Channel T uning : Scans for a analogue channel. 1. Pr ess the a button to select New . 2. Set the Pr ogramme , Colour System , Sound System , Channel and Sear ch .
◀ ▶ ◀ English N Channel mode ● P (pr ogramme mode): When tuning is complete, the br oadcasting stations in your ar ea have been assigned to position numbers fr om P0 to P99. Y ou can select a channel by entering the position number in this mode.
▶ ◀ ▶ English ❑ Using the Channel (for Satellite TV) for PDP 570 ■ Channel Manager O CONTENT → Channel Manager → ENTER E Edit the favourite channel and set the channels to Delete , Deselect All or Select All . Y ou can edit the channel name only for analogue channels.
◀ ▶ ◀ English ● ( ( ) Channels : Select a channel in the All , TV , Radio , Data/Other , Analogue scr een. Change the antenna, or channel settings using the menus in the top right cor ner of the scr een. ● ( ( ) Favourites 1 to 5 : Shows favourite channels.
▶ ◀ ▶ English Channel Status Display Icons Icon Operations a An analogue channel. c A channel selected. F A channel set as a favourite. Channel Manager Option Menu t Set each channel using the C.
◀ ▶ ◀ English 1. Select a channel and pr ess the TOOLS button. 2. Select a function and change its settings. ● W atch : W atch the selected channel. ● Add to Favourites / Edit Favourites : Set channels you watch fr equently as favourites. 1.
▶ ◀ ▶ English 2. Pr ess the ENTER E button to select Favourites 1 to 5 , then pr ess the OK button. N One favourite channel can be added in several of Favourites among Favourites 1 to 5 . ● Delete : Delete a channel to display the channels you want.
◀ ▶ ◀ English ❑ Memorising Channels (for Satellite TV) O MENU m → Channel → ENTER E ■ Antenna t N The option may dif fer depending on country. Befor e your television can begin memorizing the available channels, you must specify the type of signal sour ce that is connected to the TV .
▶ ◀ ▶ English ■ Country N The PIN input scr een appears. Enter your 4 digit PIN number . N Select your country so that the TV can corr ectly auto-tune the br oadcasting channels. ● Digital Channel : Change the country for digital channels. ● Analogue Channel : Change the country for analogue channels.
◀ ▶ ◀ English ■ Auto T uning ● Auto T uning Scans for a channel automatically and stor es in the TV . N Automatically allocated pr ogramme numbers may not corr espond to actual or desir ed pr ogramme numbers. If a channel is locked using the Channel Lock function, the PIN input window appears.
▶ ◀ ▶ English ● Digital & Analogue / Digital / Analogue : Select the channel sour ce to memorise. When selecting Cable → Digital & Analogue or Digital : Pr ovide a value to scan for cable channels. ● Sear ch Mode ( Full / Network / Quick ): Scans for all channels with active br oadcast stations and stor es them in the TV .
◀ ▶ ◀ English ● Fr equency : Displays the fr equency for the channel. (dif fers in each country) ● Modulation : Displays available modulation values.
▶ ◀ ▶ English – Start fr equency / Stop Fr equency : Set the start or stop fr equency. (differs in each country) – Symbol Rate : Displays available symbol rates. – Modulation : Displays available modulation values. ● Standby Auto Stor e ( Of f / On ) for Italy : Enables or disables auto-tune while TV is in standby mode.
◀ ▶ ◀ English ■ Manual T uning Scans for a channel manually and stor es in the TV . N If a channel is locked using the Channel Lock function, the PIN input window appears. ● T ransponder : Selects the transponder using the up/down buttons. ● Scan Mode : Selects either fr ee or all channels to stor e.
▶ ◀ ▶ English ● Signal Quality : Display the curr ent status of br oadcasting signal. N Information on a satellite and its transponder is subject to change depending on the br oadcasting conditions. N When setting is completed, move to Sear ch and pr ess the ENTER E button.
◀ ▶ ◀ English ■ Satellite System The PIN input scr een appears. Enter your 4 digit PIN number . Satellite System is available when Antenna is set to Satellite . Befor e running Auto Stor e , set Satellite System . Then channel scan is run normally.
▶ ◀ ▶ English ● LNB Settings : Configur es the outdoor equipment. – T ransponder : Selects the transponder using the up/down buttons. – DiSEqC Mode : Selects DiSEqC mode for the selected LNB. – Lower LNB Oscillators : Sets the LNB oscillators to a lower fr equency.
◀ ▶ ◀ English ● SatCR/Unicable Settings : Configur e single cable installation. N This function may not support depending on the r egion. – SatCR/Unicable : Enables or disable single cable installation support. – Slot Number : Select the SatCR user slot number for this r eceiver .
▶ ◀ ▶ English ● Positioner Settings : Configur es the antenna positioner . Positioner ( On / Of f ): Enables or disables the positioned contr ol. Positioner T ype ( USALS / DiSEqC 1.2 ): Sets the positioned type between DiSEqC 1.2 and USALS (Universal Satellite Automatic Location System).
◀ ▶ ◀ English User Mode : Sets the position of satellite antenna accor ding to each satellite. If you stor e the curr ent position of satellite antenna accor ding to a certain satellite, when the signal of that satellite is needed, the satellite antenna can be moved to pr e-populated position.
▶ ◀ ▶ English – Go to Stor ed Position : Rotates the antenna to the stor ed satellite position. – Antenna Position : Adjusts and stor es the antenna position for the selected satellite. – Stor e Curr ent Position : Stor es current position as the selected positioner limit.
◀ ▶ ◀ English Installer Mode : Sets limits to the scope of movement of satellite antenna or r eset the position. Generally, installation guide uses this function. – Limit Position ( East / W est ): Selects the dir ection of the positioner Limit.
▶ ◀ ▶ English ❑ Other Featur es O MENU m → Channel → ENTER E ■ Fine T une (analogue channels only) If the r eception is clear , you do not have to fine tune the channel, as this is done automatically during the sear ch and stor e operation.
◀ ▶ English N Settings ar e applied to the channel you’r e curr ently watching. N Fine tuned channels that have been saved ar e marked with an asterisk “*” on the right-hand side of the channel number in the channel banner . N T o r eset the fine-tuning, select Reset .
◀ ▶ English ❑ Changing the Pr eset Pictur e Mode O MENU m → Pictur e → Pictur e Mode → ENTER E ■ Pictur e Mode Select your pr eferr ed pictur e type. N When connecting a PC, the Pictur e Mode is only available the Standar d and Entertain .
◀ ▶ ◀ English ❑ Adjusting Pictur e Settings O MENU m → Pictur e → ENTER E ■ Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R) Y our television has several setting options for pictur e quality contr ol.
▶ ◀ ▶ English ❑ Changing the Pictur e Size O MENU m → Pictur e → Scr een Adjustment → ENTER E ■ Scr een Adjustment ● Pictur e Size : Y our cable box / satellite r eceiver may have its own set of scr een sizes as well. However , we highly r ecommend you use 16:9 mode most of the time.
◀ ▶ ◀ English Zoom : Magnifies the 16:9 wide pictur es vertically to fit the scr een size. N Adjusts the Zoom or Position by using u , d button.
▶ ◀ ▶ English N NOTE ● Depending on the input sour ce, the pictur e size options may vary. ● The available items may dif fer depending on the selected mode. ● When connecting a PC, only 16:9 and 4:3 modes can be adjusted. ● Settings can be adjusted and stor ed for each exter nal device connected to an input on the TV .
◀ ▶ ◀ English ● 4:3 Scr een Size ( 16:9 / Wide Zoom / Zoom / 4:3 ): A vailable only when pictur e size is set to Auto Wide . Y ou can determine the desir ed pictur e size at the 4:3 WSS (W ide Scr een Service) size or the original size. Each Eur opean country r equir es dif ferent pictur e size.
▶ ◀ ▶ English ❑ Changing the Pictur e Options ■ Advanced Settings O MENU m → Pictur e → Advanced Settings → ENTER E ( Advanced Settings ar e available in Standar d / Movie mode) Compar ed to pr evious models, new Samsung TVs have a mor e precise pictur e.
◀ ▶ ◀ English ● Black T one ( Of f / Dark / Darker / Darkest ): Select the black level to adjust the scr een depth. ● Dynamic Contrast ( Of f / Low / Medium / High ): Adjust the scr een contrast. ● Gamma : Adjust the primary colour intensity.
▶ ◀ ▶ English ● RGB Only Mode ( Of f / Red / Gr een / Blue ): Displays the Red , Gr een and Blue colour for making fine adjustments to the hue and saturation. ● Colour Space ( Auto / Native ): Adjust the range of colours available to cr eate the image.
◀ ▶ ◀ English ● Flesh T one : Emphasize pink “Flesh T one”. ● Edge Enhancement ( Of f / On ): Emphasize object boundaries. ● Motion Lighting ( Of f / On ): Reduce power consumption by brightness contr ol. N When changing a setting value of Contrast , Motion Lightning will be set to Of f .
▶ ◀ ▶ English ■ Pictur e Options O MENU m → Pictur e → Pictur e Options → ENTER E N When connecting a PC, you can only make changes to the Colour T one . ● Colour T one ( Cool / Standar d / W arm1 / W arm2 ) N W arm1 or W arm2 will be deactivated when the pictur e mode is Dynamic .
◀ ▶ ◀ English ● Digital Noise Filter ( Of f / Low / Medium / High / Auto / Auto Visualisation ): If the br oadcast signal r eceived by your TV is w eak, you can activate the Digital Noise Filter featur e to r educe any static and ghosting that may appear on the scr een.
▶ ◀ ▶ English ● HDMI Black Level ( Low / Normal ): Selects the black level on the scr een to adjust the scr een depth. N A vailable only in HDMI mode.
◀ ▶ ◀ English ❑ Setting up the TV with Y our PC Select the input sour ce to PC. ■ Auto Adjustment t O MENU m → Pictur e → Auto Adjustment → ENTER E Fr equency values / position and fine tune ar e adjusted automatically. N Not available when connecting with an HDMI to DVI cable.
▶ ◀ ▶ English ■ PC Scr een Adjustment O MENU m → Pictur e → Scr een Adjustment → PC Scr een Adjustment → ENTER E ● Coarse / Fine : Removes or r educes pictur e noise. If the noise is not r emoved by Fine-tuning alone, then adjust the fr equency as best as possible ( Coarse ) and Fine-tune again.
◀ ▶ ◀ English Using Y our TV as a Computer (PC) Display Setting Up Y our PC Softwar e (Based on W indows XP) Depending on the version of W indows and the video car d, the actual scr eens on your PC may dif fer in which case the same basic set-up information will almost always be applied.
▶ ◀ ▶ English 4. Navigate to the “Settings” tab on the display dialog-box. ● If a vertical-fr equency option exists on your display settings dialog box, the corr ect value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
◀ ▶ ◀ English ❑ Changing the Pr eset Sound Mode ■ Sound Mode t ● Standar d : Selects the normal sound mode. ● Music : Emphasizes music over voices. ● Movie : Pr ovides the best sound for movies. ● Clear V oice : Emphasizes voices over other sounds.
▶ ◀ ▶ English ❑ Adjusting Sound Settings O MENU m → Sound → Sound Ef fect → ENTER E ■ Sound Ef fect ● SRS T ruSurr ound HD ( Of f / On ) (standar d sound mode only) This function pr ovides a virtual 5.1 channel surr ound sound experience thr ough a pair of speakers using HRTF (Head Related T ransfer Function) technology.
◀ ▶ ◀ English ● SRS T ruDialog ( Of f / On ) (standar d sound mode only) This function allows you to incr ease the intensity of a voice over backgr ound music or sound ef fects so that dialog can be hear d mor e clearly. N If Speaker Select is set to Exter nal Speaker , SRS T ruDialog is disabled.
▶ ◀ ▶ English ● Equalizer Adjusts the sound mode (standar d sound mode only). – Balance L/R : Adjusts the balance between the right and left speaker . – 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth fr equencies.
◀ ▶ ◀ English ■ Br oadcast Audio Options ● Audio Language (digital channels only) Change the default value for audio languages. N The available language may dif fer depending on the br oadcast.
▶ ◀ ▶ English N Audio Format option may dif fer depending on the br oadcast. 5.1ch Dolby digital sound is only available when connecting an exter nal speaker thr ough an optical cable.
◀ ▶ ◀ English ■ Additional Settings (digital channels only) ● DTV Audio Level ( MPEG / HE-AAC ): This function allows you to r educe the disparity of a voice signal (which is one of the signals r eceived during a digital TV br oadcast) to a desir ed level.
▶ ◀ ▶ English ● SPDIF Output : SPDIF (Sony Philips Digital InterFace) is used to pr ovide digital sound, r educing interfer ence going to speakers an d various di gital devices such as a DVD player . Audio Format : Y ou can select the Digital Audio output (SPDIF) format.
◀ ▶ ◀ English ● Dolby Digital Comp ( Line / RF ): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, A TV Sound). N Select Line to obtain dynamic sound, and RF to r educe the dif fer ence between loud and soft sounds at night time.
▶ ◀ ▶ English ■ Speaker Settings ● Speaker Select ( Exter nal Speaker / TV Speaker ): A sound echo may occur due to a dif fer ence in decoding speed between the main speaker and the audio r eceiver . In this case, set the TV to Exter nal Speaker .
◀ ▶ English N When Speaker Select is set to TV Speaker . ● TV Speaker : On , Exter nal Speaker : On N If ther e is no video signal, both speakers will be mute. ● Auto V olume ( Of f / Normal / Night ): T o equalize the volume level on each channel, set to Normal .
◀ ▶ English ❑ Connecting to a Wir ed Network for PDP 550 and 570 Series Y ou can attach your TV to your LAN using cable in thr ee ways: ● Y ou can attach your TV to your LAN by connecting the LAN port on the back of your TV to an exter nal modem using a LAN cable.
◀ ▶ ◀ English ● Y ou can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Shar er which is connected to an exter nal modem.
▶ ◀ ▶ English ● Depending on how your network is configur ed, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV dir ectly to a network wall outlet using a LAN cable. See the diagram below . Note that the wall outlet is attached to a modem or r outer elsewher e in your house.
◀ ▶ ◀ English ● If you have a Dynamic Network, you should use an ADSL modem or r outer that supports Dynamic Host Configuration Pr otocol (DHCP). Modems and r outers that support DHCP automatically pr ovide the IP addr ess, subnet mask, gateway, and DNS values your TV needs to access the Inter net so you do not have to enter them manually.
▶ ◀ ▶ English ❑ Setting the Network for PDP 550 and 570 Series ■ Network Settings O MENU m → Network → Network Settings → ENTER E Set the network connection to use various Inter net services such as AllShar e™ and perform softwar e upgrade.
◀ ▶ ◀ English ■ AllShar e Settings O MENU m → Network → AllShar e Settings → ENTER E Selects whether to use media functions on the network. ■ Network Settings ( Auto ) Use the Automatic Network Settings when connecting your TV to a network that supports DHCP .
▶ ◀ ▶ English How to set up automatically 1. Go to Network Settings scr een. T o enter it, follow the dir ections of Network Settings . 2. Select the Wir ed . 3. The network test scr een appears, and network setting is done. U Move E Enter R Return Network Settings Select the network connection type.
◀ ▶ ◀ English N If it fails to set automatically, check the connection of LAN port. N If you cannot find network connection values or if you want to set connection manually, set it to Manual . Refer to fo llowing “How to set up manually”. ● The displayed image may differ depending on the model.
▶ ◀ ▶ English ■ Network Settings ( Manual ) Use the Manual Network Setup when connecting your TV to a network that r equir es a Static IP addr ess. Getting the Network Connection V alues T o get the Network connection values on most W indows computers, follow these steps: 1.
◀ ▶ ◀ English How to set up manually T o set up your TV’ s cable network connection manually, follow these steps: 1. Follow Steps 1 thr ough 2 in the “How to set up automatically” pr ocedur e. 2. Select the IP Settings on network test scr een.
▶ ◀ ▶ English 5. Enter the IP Addr ess , Subnet Mask , Gateway , and DNS Server values. Use the number buttons on your r emote to enter numbers and the arr ow buttons to move fr om one entry field to another . 6. When done, select the OK . 7. The network test scr een appears, and network setting is done.
◀ ▶ ◀ English ❑ Connecting to a Wir eless Network for PDP 550 and 570 Series T o connect your TV to your network wir eless, you need a wir eless r outer or modem and a Samsung W ir eless LAN adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’ s back or side panel USB port.
▶ ◀ ▶ English Samsung ’ s W ir eless LAN a dapter is sol d separ ately and is of fe r ed by sel ected r etailers, Ecommer ce sites and Samsungpart s.com. Samsun g’ s W ir eless LAN adapter supports the IEEE 802.11a/b/g and n communication pr otocols.
◀ ▶ ◀ English ● T o use a wir eless network, your TV must be connected to a wir eless IP shar er (either a r outer or a modem). If the wir eless IP shar er supports DHCP , your TV can use a DHCP or static IP addr ess to connect to the wir eless network.
▶ ◀ ▶ English ● If Pur e High-thr oughput (Gr eenfield) 802.11n mode is selected and the Encryption type is set to WEP , TKIP or TKIP AES (WPS2Mixed) for your AP , Samsung TVs will not support a connection in compliance with new W i-Fi certification specifications.
◀ ▶ ◀ English ● Ensur e the TV is tur ned on befor e you connect the Samsung W ir eless LAN adapter . ● Connection Methods: Y ou can setup the wir eless network connection on six ways.
▶ ◀ ▶ English ● The Samsung W ir eless LAN adapter may not be r ecognized when using a connection via a USB hub or via a USB extension cable other than the cable supplied.
◀ ▶ ◀ English How to set up automatically 1. Go to Network Settings scr een. T o enter it, follow the dir ections of Network Settings . 2. Select the Wir eless . ● The displayed image may differ depending on the model. U Move E Enter R Return Network Settings Select the network connection type.
▶ ◀ ▶ English 3. The Network function sear ches for available wir eless networks. When done, it displays a list of the available networks. 4. In the list of networks, pr ess the u or d button to select a network, and then pr ess the ENTER E button.
◀ ▶ ◀ English 6. If the wir eless r outer has security, enter the Security key (Security or PIN), then select Done . N When you enter the Security key (Security or PIN), use u / d / l / r buttons on your r emote to select number/characters.
▶ ◀ ▶ English 7. The network connection scr een appears, and network setting is done. N If it fails to set Security key (Security or PIN), select Reset or IP Settings . N If you want to set connection manually, select the IP Settings . Refer to following “How to set up manually”.
◀ ▶ ◀ English ■ Network Setup ( Manual ) Use the Manual Network Setup when connecting your TV to a network that r equir es a Static IP addr ess. Getting the Network Connection V alues T o get the Network connection values on most W indows computers, follow these steps: 1.
▶ ◀ ▶ English 3. On the dialog that appears, click the Support tab. 4. On the Support T ab, click the Details button. The Network connection values ar e displayed. How to set up manually T o set up your TV’ s cable network connection manually, follow these steps: 1.
◀ ▶ ◀ English 4. Pr ess the d button on your r emote to go to the IP Addr ess. 5. Enter the IP Addr ess , Subnet Mask , Gateway , and DNS Server values. Use the number buttons on your r emote to enter numbers and the arr ow buttons to move fr om one entry field to another .
▶ ◀ ▶ English ■ Network Setup ( WPS(PBC) ) How to set up using WPS(PBC) If your r outer has a WPS(PBC) button, follow these steps: 1. Go to Network Setting scr een. T o enter it, follow the dir ections of Network Settings. 2. Select the WPS(PBC) .
◀ ▶ ◀ English ■ Network Settings ( One Foot Connection ) The One Foot Connection make you easy to connect samsung TV and samsung wir eless r outer by placing samsung wir eless router within 1 foot(25cm) fr om samsung TV . If your wir eless r outer does not support One Foot Connection , you must connect using one of the other methods.
▶ ◀ ▶ English How to set up using One Foot Connection T ur n on the power of wir eless r outer and TV . 1. Go to Network Settings scr een. T o enter it, follow the dir ections of Network Settings .
◀ ▶ ◀ English N If One Foot Connection dose not connect your TV to your r outer , a pop-up window appears on the scr een notifying you of the failur e. If you want to try using One Foot Connection again, r eset the wir eless r outer , disconnect the Samsung W ir eless LAN adapter and then try again fr om Step 1.
▶ ◀ ▶ English 4. The network connection scr een appears, and network setting is done. 5. Place the wir eless Router to a desir ed location. N If the wir eless Router settings change or you install a new wir eless Router , you must perform the One Foot Conne ction pr ocedur e again, beginning fr om St ep 1.
◀ ▶ ◀ English ■ Network Setting ( Plug & Access ) Plug & Access function make you easy to connect samsung TV and samsung wir eless r outer by using USB memory stick. If your wir eless router does not support Plug & Access , you must connect using one of the other methods.
▶ ◀ ▶ English 3. W ait until the connection is automatically established. N If Plug & Access does not connect your TV to your wir eless r outer a pop- up window appears on the scr een notifying you of the failur e.
◀ ▶ ◀ English Priority QOS Samsung wir eless Router is optimized HD A V streaming for Samsung DTV This is our pr oduct’ s distinctive function. Samsung wir eless Router can be connected with many devices, such as laptop, mobile phone, BD player etc.
▶ ◀ ▶ English ■ Network Setup ( Ad Hoc ) Y ou can connect to a mobile device supporting Ad-hoc without an wir eless r outer thr ough the “Samsung W ir eless LAN adapter”. When connecting mobile device, you can use files on device or connect inter net using AllShar e or Multimedia function.
◀ ▶ ◀ English 3. When finished sear ching a mobile device, set the Network Name (SSID) and Security key of the device, and then connect the network. N If network do es not operat e normally, c heck the Network Name (SSID) and Security key again.
▶ ◀ ▶ English If Y our TV Fails to Connect to the Inter net Y our TV may not be able to connect to the Inter net because your ISP has permanently reg- ister ed the MAC addr ess (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Inter net as a way of pr eventing unauthorized access.
◀ ▶ ◀ English ❑ Setting the Time O MENU m → System → ENTER E ■ Time ● Clock : Setting the clock is for using various timer featur es of the TV . O The curr ent time will appear every time you pr ess the INFO button. N If you disconnect the power cor d, you have to set the clock again.
▶ ◀ ▶ English N The antenna must be connected in or der to set the time automatically. Manual : Set the curr ent time manually. N Depending on the br oadcast station and signal, the auto time set up may not be corr ect. In this case, set the time manually.
◀ ▶ ◀ English Using the Sleep Timer O MENU m → System → Time → Sleep Timer → ENTER E ● Sleep Timer t : Automatically shuts of f the TV after a pr eset period of time (30, 60, 90, 120, 150 and 180 minutes). N T o cancel Sleep Timer , select Of f .
▶ ◀ ▶ English Setting the On / Of f Timer O MENU m → System → Time → ENTER E ● On Timer 1 / On Timer 2 / On Timer 3 : Thr ee dif fer ent on timer settings can be made. Y ou must set the clock first. Setup : Select Of f , Once , Everyday , Mon~Fri , Mon~Sat , Sat~Sun or Manual to set at you convenience.
◀ ▶ ◀ English On Time : Set the hour and minute. V olume : Set the desir ed volume level. Sour ce : Select TV or USB content to be played when the TV is tur ned on automatically. ( USB can be selected only when a USB device is connected to the TV) Antenna (when the Sour ce is set to TV ): Select the desir ed antenna sour ce.
▶ ◀ ▶ English N Auto Power Of f (available only when the TV is tur ned on by T imer): The TV will be automatically tur ned of f after 4 hours of being left idle to pr event overheating.
◀ ▶ ◀ English ● Each USB you use is assigned i ts own folder . When using mor e than one of the same type of USB, make sur e the folders assigned to each USB have dif fer ent names. ● It is r ecommended that you use a USB memory stick and a multi car d r eader when using On Timer .
▶ ◀ ▶ English ● Of f Timer 1 / Of f Timer 2 / Of f Timer 3 : Thr ee dif fer ent off timer settings can be made. Y ou must set the clock first. Setup : Select Of f , Once , Everyday , Mon~Fri , Mon~Sat , Sat~Sun or Manual to set at you convenience.
◀ ▶ ◀ English ❑ Locking Pr ogrammes O MENU m → System → Security → ENTER E ■ Security The PIN input scr een appears, Enter your 4 digit PIN number . ● Channel Lock ( Of f / On ): Lock channels in Channel Manager , to pr event unauthorized users, such as childr en, fr om watching unsuitable pr ogramme.
▶ ◀ ▶ English ● Pr ogram Rating Lock (depending on the country): Pr event unauthorized users, such as childr en, fr om watching unsuitable pr ogramme with a user - defined 4-digit PIN code. If the selected channel is locked, the “ ” symbol will be displayed.
◀ ▶ ◀ English How to watch a r estricted channel If the TV is tuned to a r estricted channel, the Pr ogram Rating Lock will block it. The scr een will go blank and the following message will appear: This channel is blocked by Pr ogram Rating Lock .
▶ ◀ ▶ English ❑ Economical Solutions ■ Eco Solution O MENU m → System → Eco Solution → ENTER E ● Energy Saving ( Of f / Low / Medium / High / Pictur e Of f ) t : This adjusts the brightness of the TV in or der to r educe power consumption.
◀ ▶ ◀ English N If you adjust the Cell Light , the Eco Sensor will be set to Of f . Min Cell Light : When Eco sensor is On , the minimum scr een brightness can be adjusted manually. N If Eco Sensor is On , the display brightness may change (become slightly darker or brighter) depending on the surr ounding light intensity.
▶ ◀ ▶ English ❑ Pictur e In Pictur e (PIP) O MENU m → System → PIP → ENTER E ■ PIP Y ou can watch the TV tuner and one exter nal video sour ce simultaneously.
◀ ▶ ◀ English ● PIP ( Of f / On ): Activate or deactivate the PIP function. ● Channel : Select the channel for the sub-scr een. ● Size ( õ / ã ): Select a size for the sub-pictur e. ● Position ( ã / – / — / œ ): Select a position for the sub-pictur e.
▶ ◀ ▶ English N NOTE ● For PIP sound, r efer to the Sound Select instructions. ● If you tur n the TV of f while watching in PIP mode, the PIP window will disappear . ● Y ou may notice that the pictur e in the PIP window becomes slightly unnatural when you use the main scr een to view a game or karaoke.
◀ ▶ ◀ English ❑ Other Featur es O MENU m → System → ENTER E ■ Language ● Menu Language : Set the menu language. ● T eletext Language : Set a desir ed language for teletext. N English is the default in cases wher e the selected language is unavailable in the br oadcast.
▶ ◀ ▶ English ■ Subtitle Use this menu to set the Subtitle mode. ● Subtitle ( Of f / On ): Switches subtitles on or of f. ● Subtitle Mode ( Normal / Hearing Impair ed ): Sets the subtitle mode. ● Subtitle Language : Sets the subtitle language.
◀ ▶ ◀ English ■ Digital T ext ( Disable / Enable ) for U.K If the pr ogramme br oadcasts with digital text, this featur e is enabled. MHEG (Multimedia and Hypermedia Information Coding Experts Gr oup): An Inter national standar d for data encoding systems used in multimedia and hypermedia.
▶ ◀ ▶ English ■ Scr een Bur n Pr otection T o r educe the possibility of scr een burn, this unit is equipped with screen burn pr evention technology. The T ime setting allows you to pr ogramme the time between movement of the pictur e in minutes.
◀ ▶ ◀ English N The Pixel Shift value may dif fer depending on the monitor size (inches) and mode. N This function is not available in the Scr een Fit mode.
▶ ◀ ▶ English N The after -image r emoval function has to be executed for a long time (appr oximately 1 hour) to ef fectively r emove after -images on the scr een. If the after -image is not r emoved after performing the function, r epeat the function again.
◀ ▶ ◀ English ■ General ● Game Mode ( Of f / On ): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a mor e r ealistic gaming experience by selecting game mode.
▶ ◀ ▶ English N After connecting the game console, set Game Mode to On . Unfortunately, you may notice r educed pictur e quality. N If Game Mode is On : – Pictur e mode is set to Standar d and Sound mode is set to Movie . ● Menu T ranspar ency ( Bright / Dark ): Set the T ranspar ency of the menu.
◀ ▶ ◀ English ■ Anynet+ (HDMI-CEC) For details on set up options, r efer to the “What is Anynet+?” instructions. ■ DivX® Video On Demand Shows the r egistration code authorized for the TV . If you connect to the DivX web site and r egister , you can download the VOD r egistration file.
▶ ◀ ▶ English ■ Common Interface ● CI Menu : This enables the user to select fr om the CAM-pr ovided menu. Select the CI Menu based on the menu PC Car d. ● Application Info : View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM.
◀ ▶ ◀ English ■ Network Remote Contr ol ( On / Of f ) for PDP 550 and 570 Series T ur n on / of f or give permission to Samsung mobile phones devices. Y ou must have a Samsung Mobile phone / device which supports Network Remote Contr ol. For mor e details, r efer to each device’ s manual.
▶ ◀ ▶ English ❑ Support Menu ■ e-Manual O MENU m → Support → ENTER E Y ou can r ead the intr oduction and instructions about the TV featur es stored in your TV . N For the detailed information about e-Manual Scr een, r efer to “How to view the e-Manual” in User Manual.
◀ ▶ ◀ English ■ Self Diagnosis O MENU m → Support → ENTER E N Self Diagnosis might take few seconds, this is part of the normal operation of the TV . ● Pictur e T est : Use to check for pictur e pr oblems. Y es : If the test patter n does not appear or ther e is noise in the test pattern, select Y es.
▶ ◀ ▶ English ● Sound T est : Use the built-in melody sound to check for sound pr oblems. N If you hear no sound fr om the TV’ s speakers, befor e performing the sound test, make sur e Speaker Select is set to TV Speaker in the Sound menu.
◀ ▶ ◀ English ● Signal Information : (digital channels only) An HD channel’ s r eception quality is either perfect or the channels ar e unavailable. Adjust your antenna to incr ease signal str ength. ● T r oubleshooting : If the TV seems to have a pr oblem, r efer to this description.
▶ ◀ ▶ English ■ Softwar e Upgrade Softwar e Upgrade can be performed by network connection or downloading the latest firmwar e fr om “www .samsung.com.” to a USB memory device. Curr ent V ersion the softwar e already installed in the TV . N Softwar e is r epr esented as ‘Y ear / Month / Day_V ersion’.
◀ ▶ ◀ English ● The displayed image may differ depending on the model. Installing the Latest V ersion ● By USB : Insert a USB drive containing the firmwar e upgrade file, downloaded fr om “www .samsung.com,” into the TV . Please be car eful not to disconnect the power or r emove the USB drive until upgrades ar e complete.
▶ ◀ ▶ English ● By Online for PDP 550 and 570 Series : Upgrade the softwar e using the Inter net. N First, configur e your network. For detailed pr ocedur es on using the Network Setup, r efer to the Network Settings instructions. N If the inter net connection doesn’ t operate pr operly, the connection may be br oken.
◀ ▶ English ● Alter native Softwar e for PDP 550 and 570 Series (backup): If ther e is an issue with the new firmwar e and it is af fecting operation, you can change the softwar e to the pr evious version. N If the softwar e was changed, existing softwar e is displayed.
◀ ▶ English ❑ Using the 3D function for PDP 490 Series and above O MENU m → Pictur e → 3D → ENTER E ■ 3D This exciting new featur e enables you to view 3D content. In or der to fully enjoy this featur e, you must pur chase a pair of Samsung 3D Active Glasses (SSG- 3100GB, SSG-3 300GR, SSG-33 00CR, SSG-370 0CR) to view 3D video.
◀ ▶ ◀ English IMPOR T ANT HEAL TH AND SAFETY INFORMA TION FOR 3D PICTURES. Read and understand the following safety information befor e using the TV’ s 3D function. [ W ARNING ● Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches.
▶ ◀ ▶ English ● A r esponsible adult should fr equently check on childr en who are using the 3D function. If ther e ar e any r eports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and r est.
◀ ▶ ◀ English ● 3D Mode : Select the 3D input format. N If you want to feel the 3D ef fect fully, please wear the 3D Active Glasses first, and then select 3D Mode fr om the list below that pr ovides the best 3D viewing experience. N When watching 3D images, tur n on 3D Active Glasses.
▶ ◀ ▶ English N Some file format may not supported the “2D → 3D.” N “Side by Side” and “T op & Bottom” ar e available when the r esolution is 720p, 1080i and 1080p in DTV , HDMI and USB mode or when set to PC and the PC is connected thr ough an HDMI/DVI cable.
◀ ▶ ◀ English Resolution supported for HDMI PC mode The r esolution for HDMI PC mode is optimized to 1920 x 1080 input. An input r esolution other than 1920 x 1080 may not be displayed pr operly in 3D display or full scr een mode.
▶ ◀ ▶ English How to watch the 3D image N Some 3D modes may not be available depending on the format of the image sour ce. N T o watch in 3D, wear 3D Active Glasses and pr ess the power button on the glasses. 1. Pr ess the MENU button on your r emote, use the u or d button to select Pictur e , and then pr ess the ENTER E button.
◀ ▶ ◀ English 3. Use the u or d button to select 3D Mode , and then pr ess the ENTER E button. 4. Using the l or r buttons on your r emote contr ol, select the 3D Mode of the image you want to view . ● The displayed image may dif fer depending on the model.
▶ ◀ ▶ English Supported formats and operating specifications for Standar d HDMI 3D N The 3D formats indicated below ar e r ecommended by the HDMI association and must be supported.
◀ ▶ ◀ English Befor e using 3D function... N NOTE ● 3D Mode is set to Of f automatically when accessing My Downloads functions. ● 3D Mode is set to memorised configuration value automatically, when changing the input sour ce. ● Some Pictur e functions ar e disabled in 3D mode.
▶ ◀ ▶ English ● 3D Active Glasses fr om Samsung’ s pr evious pr oduct (IR type) or other manufactur ers may not be supported. ● When the TV is initially power ed on, may take some time until the 3D display is optimized.
◀ ▶ ◀ English ● Some files ar e not supported in the 2D to 3D function. ● Be sur e to stay within the viewing angle and optimum TV viewing distance when watching 3D pictur es. ● Otherwise, you may not be able to enjoy pr oper 3D ef fects. ● The ideal viewing distance should be thr ee times or mor e the height of the scr een.
▶ ◀ ▶ English ❑ About AllShar e™ for PDP 550 Series and above AllShar e™ connects your TV and compatible Samsung mobile phones / devices thr ough a network. Y ou can play media contents including videos, photos and music saved on your mobile phones or the other devices (such as your PC) by contr olling them on the TV via the network.
◀ ▶ ◀ English N If your Samsung TV connects to a non-Samsung DLNA server , a compatibility issue may occur during video playback. N By connecting your Samsung TV to a network via AllShar e™, you can use Samsung’ s original functions as follows: – Playback of various video formats (DivX, XVID, MP4, 3GPP , A VI, ASF , MKV , etc.
▶ ◀ ▶ English ❑ Setting Up AllShar e™ for PDP 550 Series and above O MENU m → Network → AllShar e Settings → ENTER E ■ AllShar e Settings ● Media ( On / Of f ): Enables or disables the media function. When the media function is on, Media contents play can be contr olled by a mobile phone or other devices that support DLNA DMC.
◀ ▶ ◀ English ■ Media Shows a list of mobile phones or connected devices which have been set up with this TV for using the Media function. N The Media function is available in all devices which support DLNA DMC. ● Allowed / Denied : Allows/Blocks the the devices.
▶ ◀ ▶ English Using the Media Function An alarm window appears informing the user that the media contents (videos, photos, music) sent fr om a mobile phone will be displayed on your TV . The contents ar e played automatically 3 seconds after the alarm window appears.
◀ ▶ ◀ English ● T o tur n of f the media contents transmission fr om the mobile phone, set Media to Of f in the AllShar e Settings . ● Contents may not be played on your TV depending on their r esolution and format. ● The ENTER E and l / r buttons may not work depending on the type of media content.
▶ ◀ ▶ English ❑ Setting Up Anynet+ O MENU m → System → Anynet+ (HDMI-CEC) → ENTER E ■ Anynet+ (HDMI-CEC) ( Of f / On ) t T o use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On . N When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ r elated operations ar e deactivated.
◀ ▶ ◀ English ■ Auto T ur n Of f ( No / Y es ) Setting an Anynet+ Device to tur n of f automatically when the TV is turned off. N If Auto T ur n Of f is set to Y es , running exter nal devices will tur n off at the same time as the TV powers of f.
▶ ◀ ▶ English What is Anynet+? t Anynet+ is a function that enables you to contr ol all connected Samsung devices that support Anynet+ with your Samsung TV’ s r emote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ featur e.
◀ ▶ ◀ English For the method of connecting exter nal devices , r efer to the supported user manual. N NOTE ● Connect the Optical cable between the DIGIT AL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatr e. ● When following the connection above, the Optical jack only outputs 2 channel audio.
▶ ◀ ▶ English ● Y ou can connect only one Home Theatr e. ● Y ou can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions. ● Anynet+ works when the A V device supporting Anynet+ is in the standby or on status.
◀ ▶ ◀ English Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV . Anynet+ Menu Description View TV Changes Anynet+ mode to TV br oadcast mode. Device List Shows the Anynet+ device list.
▶ ◀ ▶ English Anynet+ Menu Description (device_name) Title Menu Shows the title menu of the connected device. E.g. If a DVD r ecor der is connected, the title menu of the DVD r ecor der will appear . N Depending on the device, this menu may not be available.
◀ ▶ ◀ English ❑ Switching between Anynet+ Devices 1. Pr ess the TOOLS button to select Anynet+ (HDMI-CEC) . And then pr ess the ENTER E button to select Device List . N If you cannot find a device you want, pr ess the a button to r efr esh the list.
▶ ◀ ▶ English ● Switching to the selected device may take up to 2 minutes. Y ou cannot cancel the operation during the switching operation. ● If you have selected exter nal input mode by pr essing the SOURCE button, you cannot use the Anynet+ function.
◀ ▶ ◀ English ❑ Listening thr ough a Receiver Y ou can listen to sound thr ough a r eceiver (i.e Home Theatr e) instead of the TV Speaker . 1. Select Receiver and set to On . 2. Pr ess the EXIT button to exit. N If your r eceiver supports audio only, it may not appear in the device list.
▶ ◀ ▶ English N When the r eceiver (i.e Home Theatr e) is set to On, you can hear sound output fr om the TV’ s Optical jack. When the TV is displaying a DTV (aerial) signal, the TV will send out 5.
◀ ▶ ◀ English ❑ T r oubleshooting for Anynet+ Pr oblem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Only one r eceiver (home theatr e) can be connected.
▶ ◀ ▶ English Pr oblem Possible Solution I want to start Anynet+. • Check if the Anynet+ device is pr operly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. • Pr ess the TOOLS button to display the Anynet+ menu and select a menu you want.
◀ ▶ ◀ English Pr oblem Possible Solution The connected device is not displayed. • Check whether or not the device supports Anynet+ functions. • Check whether or not the HDMI cable is pr operly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
▶ ◀ ▶ English ❑ Using the My Downloads Enjoy photos, music and / or movie file s saved on a USB Mass Storage Class (MSC) 1. Pr ess the CONTENT button. 2. Pr ess the u / d / l / r button to select desir ed menu ( Videos , Photos , Music ), then pr ess the ENTER E button.
◀ ▶ ◀ English ❑ Connecting a USB Device 1. T ur n on your TV . 2. Connect a USB device containing photo, music and/or movie files to the USB jack on the side of the TV . 3. When USB is connected to the TV , popup window appears. Then you can select New device connected .
▶ ◀ ▶ English N It might not work pr operly with unlicensed multimedia files. N Need-to-Know List befor e using My Downloads ● MTP (Media T ransfer Pr otocol) is not supported. ● The file system supports F A T16, F A T32 and NTFS. ● Certain types of USB Digital camera and audio devices may not be compatible with this TV .
◀ ▶ ◀ English ● Befor e connecting your device to the TV , please back up your files to pr event them fr om damage or loss of data. SAMSUNG is not r esponsible for any data file damage or data loss. ● Do not disconnect the USB device while it is loading.
▶ ◀ ▶ English ● MP3 files with DRM that have been downloaded fr om a non-fr ee site cannot be played. Digital Rights Management (DRM) is a technology that supports the cr eation, distribution .
◀ ▶ ◀ English ● If the TV has been no input during time set in Auto Pr otection Time , the Scr eensaver will run. ● The power -saving mode of some exter nal har d disk drives may be r eleased automatically when connected to the TV .
▶ ◀ ▶ English ❑ Scr een Display Move to the desir ed file using the l / r / u / d buttons and then pr ess the ENTER E or (Play) button. The file is played.
◀ ▶ ◀ English ■ Videos Playing Video 1. Pr ess the l / r / u / d button to select the desir ed video in the file list. 2. Pr ess the ENTER E button or (Play) button. – The selected file name is displayed on the top with its playing time.
▶ ◀ ▶ English – During video playback, you can sear ch using l and r button. – Y ou can use (REW) and µ (FF) buttons during playback. N In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. ● Supported Subtitle Formats Name File extension Format MPEG-4 time-based text .
◀ ▶ ◀ English ● Supported Video Formats File Extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec *.avi *.mkv A VI MKV Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8 MP3 / AC3 / LPCM / ADPCM / DTS Cor e XviD 1920x1080 6 ~ 30 8 H.
▶ ◀ ▶ English File Extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec *.3gp 3GPP H.264 BP / MP / HP 1920x1080 6 ~ 30 25 ADPCM / AAC / HE- AAC MPEG4 SP / ASP 1920x1080 6 ~ 30 8 *.vr o VRO VOB MPEG1 1920x1080 24 / 25 / 30 30 AC3 / MPEG / LPCM MPEG2 1920x1080 24 / 25 / 30 30 *.
◀ ▶ ◀ English Video Decoder Audio Decoder • Supports up to H.264, Level 4.1 • H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and A VCHD ar e not supported. • XVID, MPEG4 SP , ASP: − Below 1280 x 720: 60 frame max − Above 1280 x 720: 30 frame max • GMC is not supported.
▶ ◀ ▶ English Other Restrictions N NOTE ● Video content will not play, or not play correctly, if ther e is an error in the content or the container . ● Sound or video may not work if the contents have a standar d bitrate/frame rate above the compatible Frame / sec listed in the table above.
◀ ▶ ◀ English ■ Music Playing Music 1. Pr ess the l / r / u / d button to select the desir ed Music in the file list. 2. Pr ess the ENTER E button or (Play) button. – Y ou can use (REW) and µ (FF) buttons during playback. ● The displayed image may differ depending on the model.
▶ ◀ ▶ English N Only displays the files with MP3 extension. Other file extensions ar e not displayed, even if they ar e saved on the same USB device. N If the sound is abnormal when playing MP3 files, adjust the Equalizer in the Sound menu. (An over -modulated MP3 file may cause a sound pr oblem.
◀ ▶ ◀ English Playing selected music 1. Pr ess the { ( Edit Mode ) button. 2. Select the desir ed music. N The c mark appears to the left of the selected files. 3. Pr ess the TOOLS button and select Play Selected Contents . N Y ou can select or deselect all music pr essing the Select All / Deselect All .
▶ ◀ ▶ English ■ Photos Viewing a Photo (or Slide Show) 1. Pr ess the l / r / u / d button to select the desir ed photo in the file list. 2. Pr ess the ENTER E button. ● When a selected photo is displayed, pr ess the ENTER E button to start the slide show .
◀ ▶ ◀ English N Music files can be automatically played during the Slide Show if the Backgr ound Music is set to On . N The Backgr ound Music cannot be changed until the BGM has finished loading.
▶ ◀ ▶ English ❑ My Downloads - Additional Functions Videos / Music / Photos Play Option menu During playing a file, pr ess the TOOLS button. Category Operation Videos Music Photos Title Sear ch Y ou can move directly to another T itle. c Time Sear ch Y ou can search the movie using l and r buttons at intervals of 10 seconds.
◀ ▶ ◀ English Category Operation Videos Music Photos Pictur e Mode Y ou can adjust the pict ur e setting. c c Sound Mode Y ou can adjust the sound setting. c c c Subtitle Language Y ou can view a subtitle. Y ou can select a specific language if the subtitle file contains multiple languages.
▶ ◀ ▶ English Category Operation Videos Music Photos Audio Y ou can enjoy a video in one of the supported languages. The function is only enabled when you play str eam-type files which support multiple audio formats. c Start Slide Show / Pause Slide Show Y ou can start or pause a Slide Show .
◀ ▶ English Category Operation Videos Music Photos Zoom Y ou can zoom into images in full scr een mode. c Rotate Y ou can rotate images in full scr een mode.
◀ ▶ English ❑ T eletext Featur e The index page of the T eletext service gives you information on how to use the service. For T eletext information to be displayed corr ectly, channel r eception must be stable. Otherwise, information may be missing or some pages may not be displayed.
◀ ▶ English ◀ / (T eletext on / mix / of f) Activates the T eletext mode for the current channel. Pr ess the button twice to overlap the T eletext mode with the current br oadcasting scr een. Pr ess it one mor e time to exit teletext. 8 (stor e) Stor es the T eletext pages.
▶ ◀ ▶ English Colour buttons (r ed, gr een, yellow , blue) If the F ASTEXT system is used by the broadcasting company, the dif fer ent topics on a T eletext page are colour -coded and can be selected by pressing the colour ed buttons. Pr ess the colour corr esponding to the topic of your choice.
◀ ▶ English ◀ 3 (page down) Displays the pr evious T eletext page. 6 (index) Displays the index (contents) page at any time while you ar e viewing T eletext. 5 (r eveal) Displays the hidden text (answers to quiz games, for example). T o display the normal scr een, pr ess it again.
▶ ◀ ▶ English T ypical T eletext page Part Contents A Selected page number . B Br oadcasting channel identity. C Curr ent page number or sear ch indications.
◀ ▶ English ◀ ❑ T r oubleshooting If you have any questions about the TV , first r efer to this list. If none of these tr oubleshooting tips apply, please visit “www . samsung.com,” then click on Support, or contact the call centr e listed on the back-cover of this manual.
▶ ◀ ▶ English Issues Solutions and Explanations The pictur e is distorted: macr o block err or , small block, dots, pixelization • Compr ession of video contents may cause pictur e distortion especially in fast moving pictur es such as sports and action movies.
◀ ▶ English ◀ Issues Solutions and Explanations Ther e is a dotted line on the edge of the scr een. • If the pictur e size is set to Scr een Fit , change it to 16:9 . • Change cable / satellite box r esolution. The pictur e is black and white.
▶ ◀ ▶ English Issues Solutions and Explanations The pictur e is good but ther e is no sound. • Set the Speaker Select option to TV Speaker in the Sound menu. • If you ar e using an exter nal device, make sur e the audio cables ar e connected to the corr ect audio input jacks on the TV .
◀ ▶ English ◀ Issues Solutions and Explanations No Pictur e, No Video The TV tur ns of f automatically. • Ensur e the Sleep Timer is set to Of f in the System menu. • If your PC is connected to the TV , check your PC power settings. • Make sur e the AC power cor d is plugged in secur ely to the wall outlet and the TV .
▶ ◀ ▶ English Issues Solutions and Explanations PC Connection A “Mode Not Supported” message appears. • Set your PC’ s output resolution so it matches the r esolutions supported by the TV . “PC” is always shown on the sour ce list, even if a PC is not connected.
◀ ▶ English ◀ Issues Solutions and Explanations Others The pictur e won’ t display in full scr een. • HD channels will have black bars on either side of the scr een when displaying up scaled SD (4:3) contents. • Black bars on the top and bottom will appear during movies that have aspect ratios dif fer ent fr om your TV .
▶ ◀ ▶ English Issues Solutions and Explanations Image Retention (Bur n In) Issue. • T o minimize the possibility of screen burn, this unit is equipped with scr een bur n r eduction technology. Pixel Shift technology enables you to set pictur e movement up / down (V ertical Line) and side to side (Horizontal Dot).
◀ ▶ English ◀ Issues Solutions and Explanations Y our settings are lost after 30 minutes or every time the TV is tur ned of f. • If the TV is in the Stor e Demo mode, it will r eset audio and pictur e settings every 30 minutes. Change the settings fr om Stor e Demo mode to Home Use mode in the Plug & Play pr ocedur e.
▶ ◀ ▶ English Issues Solutions and Explanations The m essa ge “ Scram ble sign al” or “W eak Signal / No Signal” appears. • If you ar e using a CAM CARD (CI / CI+), check that it is installed into the common interface slot. • If ther e is still a pr oblem, pull the CAM CARD out of the TV and insert it into the slot again.
◀ ▶ English ◀ N Some of above pictur es and functions ar e available at specific models only. N Y ou can keep your TV as optimum condition to upgrade the latest firmwar e on web site (samsung.
▶ ◀ ▶ English ❑ CONNECTIONS COMMON INTERF ACE Slot T o watch paid channels, the “CI or CI+ CARD” must be inserted. ● If you don’ t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.
◀ ▶ English ◀ N NOTE ● Y ou must obtain a “CI or CI+ CARD” fr om a local cable service pr ovider . ● When r emoving the “CI or CI+ CARD”, car efully pull it out with your hands since dr opping the “CI or CI+ CARD” may cause damage to it.
▶ ◀ ▶ English ● If you have any pr oblems, please contact a service pr ovider . ● Insert the “CI or CI+ CARD” that supports the curr ent antenna settings. The scr een will be distorted or will not be seen. ● When you ar e watching the satellite TV , r emove the “CI or CI+ CARD” of terr estrial and cable.
◀ ▶ English ◀ ❑ Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may dif fer fr om the illustration depending on the manufactur er .
▶ ◀ ▶ English T o lock the pr oduct, follow these steps: 1. W rap the Kensington L ock cable ar ound a large, stati onary object such as desk or chair . 2. Slide the end of the cable with the lock attached thr ough the looped end of the Kensington Lock cable.
◀ ▶ English ◀ ❑ Licence Theatr eSound, SRS and the symbol ar e trademarks of SRS Labs, Inc. Theatr eSound technology is incorporated under licence fr om SRS Labs, Inc. Manufactur ed under licence fr om Dolby Laboratories. Dolby and the double-D symbol ar e trademarks of Dolby Laboratories.
▶ ◀ English DivX Certified® to play DivX® video up to HD 1080p, including pr emium content. DivX®, DivX Certified® and associated logos ar e trademarks of DivX, Inc. and ar e used under licence. ABOUT DIVX VIDEO: DivX® is a digital video format cr eated by DivX, Inc.
デバイスSamsung PS51D495の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung PS51D495をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung PS51D495の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung PS51D495の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung PS51D495で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung PS51D495を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung PS51D495の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung PS51D495に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung PS51D495デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
