Samsungメーカーsf 150の使用説明書/サービス説明書
ページ先へ移動 of 58
ELECTRONICS P/N. JF68-60860A 01-cover 3/25/98 4:10 PM Page 1.
Operator ’s Guide SAMSUNG F ACSIMILE Please read this guide befor e you use this equipment. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01-cover 3/25/98 4:10 PM Page 2.
Thank Y ou for Choosing Samsung! Y our SF 150 facsimile machine repr esents the very latest in technology . It is a full-featured, high- performance device, built to SamsungÕs strict quality standards- the highest in the industry . W eÕre proud to of fer you a product that will pr ovide convenience and dependability for years to come.
15.A void using your SAMSUNG fax machine during a lightning storm. There may be a r emote risk of electric shock from lightning. If pr udent, unplug the AC power and telephone cor ds for the duration of the lightning storm. 16.This product contains a r ecyclable battery .
Fax Branding The T elephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone facsimile machine unless s.
Y ou should also know that: ¥ Y our Samsung F AX machine is not designed to be connected to a digital PBX system. ¥ Special features, such as ÒCall W aitingÓ, may interrupt F AX service, and we suggest that these services not be installed on the F AX line.
C HAPTER 1 Y OUR N EW M ACHINE Parts ..................................................................................................................................... 1.1 Familiarizing Y ourself with Y our New Machine .............................
C ONTENTS C HAPTER 5 C ARE AND M AINTENANCE Clearing Jams ..................................................................................................................... 5.1 Paper Jams During T ransmission .......................................
Chapter One Y OUR N EW M ACHINE Ch-1 3/25/98 6:09 PM Page 7.
Chapter One Y OUR N EW M ACHINE This chapter will familiarize you with your new fax machine. Parts Once you have unpacked your fax machine, check to make sure that you have all the parts shown here. If any piece is missing or br oken, call your dealer .
Y OUR N EW M ACHINE 1 .2 C HAPTER O NE : Y OUR N EW M ACHINE 1 Familiarizing Y ourself with Y our New Machine T ake a moment to familiarize yourself with your new machine by looking at the pictur es on the next few pages. Handset Use this as you would use a telephone handset.
Y OUR N EW M ACHINE C HAPTER O NE : Y OUR N EW M ACHINE 1 .3 Speaker Rear View AC Power Socket The power cord connects to this socket. Phone Line Socket (LINE) The telephone line cord connects to this jack. Handset Socket This is where you connect the handset to the machine.
ABC JKL GHI TUV PQRS Flash Redial/ Pause Scroll/ Volume 45 78 0 12 Menu Resolution Rcv. Mode Speed Dial Y OUR N EW M ACHINE 1 .4 C HAPTER O NE : Y OUR N EW M ACHINE 1 Speed Dial Button Make calls and send documents by entering a 2-digit number (01-30).
OHD/V.Req. Start/ Copy Stop 1 23 4 5 ABC DEF JKL GHI MNO TUV Help PQRS WXYZ ash ial/ se oll/ me 45 6 7 8 9 0 12 3 OHD/V .Req. This button allows you to dial a number without picking up the handset. Y ou can also use it to initiate a voice request after sending or receiving documents.
Chapter T wo I NST ALLA TION AND S ETUP Ch-2 3/25/98 6:11 PM Page 1.
Chapter T wo I NST ALLA TION AND S ETUP Please review the safety information at the fr ont of this manual, then follow the directions in this chapter to connect your machine and set it up for use.
I NST ALLA TION AND S ETUP 2 .2 C HAPTER T WO : I NST ALLA TION AND S ETUP 2 1 Open the cover by lifting the release lever on the side of the machine. 2 Insert the paper roll. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 Install the spacer, if necessary.
I NST ALLA TION AND S ETUP C HAPTER T WO : I NST ALLA TION AND S ETUP 2 .3 Ã For information on preparing a document, see page 3.1. 1 Turn the document face down and slide it into the feeder slot. Making a Copy Copy a document to make sure that the machine is working pr operly .
I NST ALLA TION AND S ETUP 2 .4 C HAPTER T WO : I NST ALLA TION AND S ETUP 2 1 Press Menu. Flash Pause Menu Resolution ode 2 Press 2. ABC DEF JKL GHI MNO TUV PQRS WXYZ 45 6 12 3 / e / e Setting the Date and T ime The LCD window displays ÔDATE & TIMEÕ.
I NST ALLA TION AND S ETUP C HAPTER T WO : I NST ALLA TION AND S ETUP 2 .5 5 Press Start/Copy to save the mode chosen. Start/ Copy Stop Help 9 6 Press ¹ or to move the blinking line under the number you want to change. A J GHI T PQRS 4 7 1 Redial/ Pause Scroll/ Volume The LCD window displays the date and time previously set in the chosen format.
I NST ALLA TION AND S ETUP 2 .6 C HAPTER T WO : I NST ALLA TION AND S ETUP 2 1 Press Menu. Flash Menu Resolution ode 2 Press 1. ABC D JKL GHI M TUV PQRS W 45 78 12 Redial/ Pause Scroll/ Volume Setting the T erminal ID (Y our Name and Number) This terminal ID will print at the top of each page sent from your machine.
I NST ALLA TION AND S ETUP C HAPTER T WO : I NST ALLA TION AND S ETUP 2 .7 5 Press Start/Copy when the number in the LCD is correct. Start/ Copy Stop Help 8 9 0 The machine prompts you to enter your name. NAME: 6 Press the number button labeled with the letter you want.
Chapter Three T HE F AX M ACHINE Ch-3 3/25/98 6:28 PM Page 1.
Chapter Three T HE F AX M ACHINE C HAPTER T HREE : T HE F AX M ACHINE 3 .1 In this chapter , you will learn how to send and receive fax documents, use the four fax reception modes, and the voice r equest feature.
T HE F AX M ACHINE 3 .2 C HAPTER T HREE : T HE F AX M ACHINE 3 Loading a Document 1 Turn the document face down. 2 Insert the top edge of the document into the feeder slot. The LCD window briefly displays the message ÔDOCUMENT LOADINGÕ, then prompts you to set the contrast if required.
T HE F AX M ACHINE C HAPTER T HREE : T HE F AX M ACHINE 3 .3 Dialing a Number 1 Pick up handset. 2 Using the number keypad, enter the number of the remote fax machine. OHD/ Start/ Copy 1 2 ABC DEF JKL GHI MNO TUV PQRS WXYZ Help 45 6 7 8 9 0 12 3 Flash Redial/ Pause Scroll/ Volume à For hands-off operation, pr ess OHD.
T HE F AX M ACHINE 3 .4 C HAPTER T HREE : T HE F AX M ACHINE 3 Confirming the T ransmission When the last page of your document has been sent successfully, the machine beeps, the LCD window displays ÔOKÕ and returns to Standby Mode. Canceling T ransmission 1 Press Stop at any time to cancel transmission.
T HE F AX M ACHINE C HAPTER T HREE : T HE F AX M ACHINE 3 .5 Receiving a Fax Reception Modes Y our fax machine has four reception modes: ¥ In F AX mode, the machine answers an incoming call and immediately goes into receive mode, expecting a fax to be sent.
T HE F AX M ACHINE 3 .6 C HAPTER T HREE : T HE F AX M ACHINE 3 2 When the telephone rings, answer it as a normal phone call. 3 If you hear a fax tone, or if the person on the other end asks you to receive a document, press Start/Copy. Start/ Copy Stop WXYZ Help 9 4 Replace the handset.
T HE F AX M ACHINE C HAPTER T HREE : T HE F AX M ACHINE 3 .7 Ã Y ou should answer the call, or it will switch to automatic reception mode. 2 When a call comes in, the machine waits for a fax signal. If a fax is being sent, the machine goes into receive mode.
T HE F AX M ACHINE 3 .8 C HAPTER T HREE : T HE F AX M ACHINE 3 2 When a call comes in, the answering machine answers and stores the callerÕs message if they leave one.
T HE F AX M ACHINE C HAPTER T HREE : T HE F AX M ACHINE 3 .9 The phone extension might not work properly depending on the line condition. 2 When you are finished speaking, or the machine begins receiving documents, replace the handset of the extension telephone.
T HE F AX M ACHINE 3 .10 C HAPTER T HREE : T HE F AX M ACHINE 3 2 When the phone rings, pick up the handset and answer it. Ã When you finish talking, if you have another document to send, load the document and tell the other person to press Start. When you hear the fax tones, press Start/Copy .
T HE F AX M ACHINE C HAPTER T HREE : T HE F AX M ACHINE 3 .11 1 Press OHD/V.Req. OHD/V.Req. Start/ Copy Stop MNO WXYZ 6 9 Ã Y ou'll hear the dial tone through the speaker .
Chapter Four S PECIAL F EA TURES Ch-4 3/25/98 6:32 PM Page 1.
STORE ONETOUCH 3 TEL.:_ Chapter Four S PECIAL F EA TURES C HAPTER F OUR : S PECIAL F EA TURES 4. 1 Automatic Dialing There ar e two ways to store numbers for automatic dialing: One-T ouch dialing and Speed Dialing. One-T ouch dialing lets you touch any one of 5 One-T ouch buttons to dial your number automatically .
S PECIAL F EA TURES 4. 2 C HAPTER F OUR : S PECIAL F EA TURES 4 Ã Y ou can enter up to 20 letters. For more information on how to enter letters using the number keypad, see below . Ã T o cancel the operation, press Stop. The machine returns to Standby Mode.
S PECIAL F EA TURES C HAPTER F OUR : S PECIAL F EA TURES 4. 3 3 If you want to enter the same letter, move the blinking line to next position using the button. J GHI T PQRS 45 7 12 Redial/ Pause Scroll/ Volume The blinking line is moved to the next position.
S PECIAL F EA TURES 4. 4 C HAPTER F OUR : S PECIAL F EA TURES 4 Storing a Number for Speed Dialing 1 Press and hold Speed Dial until ÔSPD.NO [01-30] ??Õ appears in the display. Resolution Rcv. Mode Speed Dial The display will prompt you for the Speed Dial location you want to use.
S PECIAL F EA TURES C HAPTER F OUR : S PECIAL F EA TURES 4. 5 5 Add a name to the number, or skip to step 6. OHD/V.Req Start/ Copy Sto 1 23 5 ABC DEF JKL GHI MNO TUV PQRS WXYZ Help 45 6 7 8 9 0 12 3 Flash Redial/ Pause Scroll/ Volume 6 Press Start/Copy when the name has been entered.
S PECIAL F EA TURES 4. 6 C HAPTER F OUR : S PECIAL F EA TURES 4 Dialing Speed Dial Number 2 Press Speed Dial. Resolution Rcv. Mode Speed Dial 3 Enter the 2-digit location number. OHD/V.R Start/ Copy S 1 2 5 ABC DEF JKL GHI MNO TUV PQRS WXYZ Help 45 6 7 8 9 0 12 3 Flash Redial/ Pause Scroll/ Volume à If you pressed OHD/V .
S PECIAL F EA TURES C HAPTER F OUR : S PECIAL F EA TURES 4. 7 Redial/Pause Redial/Pause has two functions. It can be used to redial the last dialed number , or it can be used to insert a pause in a number when youÕre setting up a One-T ouch or Speed Dial number .
S PECIAL F EA TURES 4. 8 C HAPTER F OUR : S PECIAL F EA TURES 4 T ONE Some special services, such as alternate long-distance services and bank-by-phone, need tone signals. If you have pulse service, you can still use the special tone services by following these steps: 1 Make a call to the special service access number.
S PECIAL F EA TURES C HAPTER F OUR : S PECIAL F EA TURES 4. 9 1 Press Menu. Flash Menu Resolution Mode 2 Press 3. OHD/V.Req 1 23 5 ABC DEF JKL MNO TUV WXYZ 56 23 3 Press Start/Copy. Start/ Copy Stop Help 8 9 0 User Options Y our fax machine has various user-selectable featur es.
S PECIAL F EA TURES 4. 10 C HAPTER F OUR : S PECIAL F EA TURES 4 5 When the desired option appears in the LCD, press Start/Copy. Now, you can set each option by following the instructions below.
S PECIAL F EA TURES C HAPTER F OUR : S PECIAL F EA TURES 4. 11 User Reports Y our machine can print out reports containing useful information - transmission and reception verification, option settings, etc. For instr uctions on printing reports, see page 4.
S PECIAL F EA TURES 4. 12 C HAPTER F OUR : S PECIAL F EA TURES 4 1 Press Menu. Flash Menu Resolution Mode 2 Press 4. JKL GHI MNO TUV PQRS WXYZ 45 6 7 8 9 12 3 dial/ use roll/ ume The LCD window displays ÔREPORTÕ. 4. REPORT Printing Reports The LCD window displays the report you selected.
S PECIAL F EA TURES C HAPTER F OUR : S PECIAL F EA TURES 4. 13 Clearing Memory Y ou can clear the information in your fax machineÕs memory . 1 Press Menu. Flash Menu Resolution e 2 Press 5. The LCD window displays ÔMEMORY CLEARÕ. JKL GHI MNO TUV PQRS WXYZ 45 6 7 8 9 12 3 4 Select the desired menu by using ¹ or .
S PECIAL F EA TURES 4. 14 C HAPTER F OUR : S PECIAL F EA TURES 6 If you want to clear that memory, press Start/Copy. The LCD window displays the message ÔMEMORY CLEARED!Õ. Start/ Copy Stop Help 9 Ã If you donÕt want to clear the memory , press Stop.
S PECIAL F EA TURES C HAPTER F OUR : S PECIAL F EA TURES 4 .15 The LCD displays the time previously set. TIME 12:00 5 Press Start/Copy. Start/ Copy Stop Help 8 9 0 6 Press ¹ or to move the blinking line under the number you want to change.
Chapter Five C ARE AND M AINTENANCE Ch-5 3/25/98 6:36 PM Page 1.
Chapter Five C ARE AND M AINTENANCE In this chapter you will learn how to clear documents jams, what the various error messages mean, and how to fix problems. Clearing Jams Paper Jams During T ransmission C HAPTER F IVE : C ARE AND M AINTENANCE 5. 1 1 Unplug the power cord.
C ARE AND M AINTENANCE 5. 2 C HAPTER F IVE : C ARE AND M AINTENANCE 5 5 Replace the guide. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Ã Make sure the handles on the end of the roller lock in place.
C ARE AND M AINTENANCE C HAPTER F IVE : C ARE AND M AINTENANCE 5. 3 3 Remove the guide by lifting it with both hands. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4 Carefully pull out the jammed paper in the direction of arrow.
1 Turn the power off. Open the paper cover by lifting the release button. 2 Remove the guide and the recording paper roll. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 Wipe the roller and the thermal head with a soft cloth dampened with water.
C ARE AND M AINTENANCE C HAPTER F IVE : C ARE AND M AINTENANCE 5. 5 Purchasing and Storing Paper Purchase r eplacement rolls of coated thermal fax paper with a maximum outer diameter of 2.05 in/52 mm. (T otal length of the paper roll is appr oximately 98.
C ARE AND M AINTENANCE 5. 6 C HAPTER F IVE : C ARE AND M AINTENANCE 5 Understanding LCD Error Messages The document you are sending has jammed in the feeder . Clear the document jam. See page 5.1 Call the service center for help. Y our machine is out of paper or the paper cover is open.
C ARE AND M AINTENANCE C HAPTER F IVE : C ARE AND M AINTENANCE 5. 7 Specifications Type of unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Personal Desktop Facsimile Transceiver Communication System . . . . . . . . . . . . . . . . . . .
デバイスSamsung sf 150の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung sf 150をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung sf 150の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung sf 150の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung sf 150で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung sf 150を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung sf 150の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung sf 150に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung sf 150デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
