SamsungメーカーSP46L6HXの使用説明書/サービス説明書
ページ先へ移動 of 64
DLP TV SP42L6HX SP46L6HX SP50L6HX SP56L6HX SP61L6HX SP67L6HX Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference.
BP68-00478E-00Eng_0826 8/26/05 6:04 PM Page 2.
English - 3 Contents ◆ C ONNECTING AND P REP ARING Y OUR T ELEVISION ■ Control Panel of Your Television ................................................................... 5 ■ Connection Panel of Your Television .................................
English - 4 Contents (continued) ◆ U SING Y OUR T ELEVISION (continued) ■ Setting the Film Mode.................................................................................... 31 ■ Viewing the Picture In Picture (PIP) .......................
English - 5 Contr ol P anel of Y our T elevision LED Indicators ➢ The actual configuration on your TV may be different, depending on your model. Switch the TV On and Off Picture On/Off Remote Contro.
English - 6 Connection P anel of Y our T ele vision ➢ The actual configuration on your TV may be different, depending on your model. ➢ Video Input Audio Input S-Video Input BP68-00478E-00Eng_0826 .
English - 7 n Connection P anel of Y our T ele vision (continued) ➢ The actual configuration on your TV may be different, depending on your model. Rear of the TV Œ ANT IN Coaxial connector for aerial or cable network. ´ S-Video Input Connect to S-Video output jacks of an S-VHS VCR or DVD player.
English - 8 ➢ M To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the ANT IN jack on the rear of the television.
English - 9 Infrared Remote Contr ol ➢ The performance of the remote control may be affected by bright light. POWER ON/OFF DIRECT CHANNEL SELECTION VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF MENU DI.
English - 10 You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it.
English - 11 n Your television can be placed in Standby mode, in order to reduce the power consumption. The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1 Press the POWER () button on the remote control to turn the screen off.
English - 12 W se se Becoming F amiliar with the Remote Contr ol The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Display the on-screen menu system The following table presents the most frequently used buttons and their functions.
English - 13 When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the television is in Standby mode, press the POWER () b u tton on the remote control.
English - 14 Setup Move Enter Return Plug & Play Language : English Time Blue Screen : Off Melody : Off Color Weakness : Off PC TV Y av p p c If you want to reset this feature... 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Setup .
English - 15 You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
English - 16 You can store the television channels, including those received via cable networks. When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify 1 Press the MENU button.
e … English - 17 8 If you know the number of the channel to be stored, see the following steps. ◆ Press the œ or √ button to select Channel . ◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). ◆ Press the √ button.
English - 18 T st a You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are thus not displayed. All channels that you do not specifically choose to skip are displayed during scanning.
English - 19 This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using the auto store. You can delete those channels you do not want to keep. 1 Press the MENU button. Result : The main menu is displayed.
English - 20 This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using front panel buttons. Only remote control can release the Child Lock setting, so keep the remote control away from children.
English - 21 o Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Channel .
English - 22 If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. 1 Press the MENU button.
English - 23 . s Vi e wing the Channel S can Picture This feature automatically scans all of the channels it has memorized. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Channel . Result : The options available in the Channel group are displayed.
English - 24 Y v Displa ying Inf ormation You can view the channel information and setting status you select by pressing the “INFO” button on the remote control.
English - 25 You can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Picture . Result : The options available in the Picture group are displayed.
English - 26 Y v Your television has several settings which allow you to control picture quality. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Picture . Result : The options available in the Picture group are displayed.
English - 27 You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Picture . Result : The options available in the Picture group are displayed.
English - 28 T p p “C This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Picture .
English - 29 Se t ting the My Color Contr ol (Easy Control) This feature allows you to adjust colors to according to their preferences, by adjusting skin, sky and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, “Custom”) without affecting other colors on the screen.
English - 30 Se t ting the My Color Contr ol (Detail Control) T his settings can be adjusted to suit your personal preferences. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Picture . Result : The options available in the Picture group are displayed.
English - 31 Se t ting the Film Mode d You can automatically sense and process film signals from all sources and adjust the picture for optimum quality. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Picture .
English - 32 Ea B P S P Vi e wing the Picture In Picture (PIP) Picture Mode : Standard √ √ Color Tone : Cool1 √ √ Size : 16 : 9 √ √ Digital NR : Off √ √ DNIe : On √ √ My Color Control √ √ Film Mode : Off √ √ PIP √ √ TV Move Enter Return PIP PIP : On Source : TV Swap Size : Position : Prog.
English - 33 11 Press the ▲ or ▼ button to select Position . Press the ENTER button. Select a position of the sub picture by pressing the ▲ or ▼ button. Result : The available positions are displayed: ➢ Position can not be selected in the “ ” (Double1) or “ ” (Double2) picture size mode.
Tr pl co pl w English - 34 T You can select the type of special sound effect to be used when watching a given broadcast. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Sound . Result : The options available in the Sound group are displayed.
English - 35 TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers.
English - 36 W ex so Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed.
English - 37 Sound Mode : Custom Equalizer SRS TSXT : Off Auto Volume : Off Internal Mute : Off TV Move Enter Return Off On Enjo ying the S ound of External Speakers When using a device such as Home Theater or Amplifier with external speakers, you can set “Internal Mute” to “On” to cutoff sound from the TV’s internal speakers.
English - 38 Y by w S electing the Sound Mode (depending on the model) The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual I ” or “Stereo”, depending on the current transmission.
English - 39 Time Clock Set - - : - - am √ √ Sleep Timer : Off √ √ On Timer Off √ √ Off Timer Off √ √ TV Move Enter Return Setup Move Enter Return Plug & Play √ √ Language : En.
English - 40 Y You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Setup . Result : The options available in the Setup group are displayed.
English - 41 You can set the On or Of f timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select ◆ Switch off automatically at the time you select ➢ The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time” on page 39).
English - 42 T p You can hear melody sound when the television is powered on or off. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Setup . Result : The options available in the Setup group are displayed.
English - 43 Using the Color W eakness Enhancement F eature This feature adjusts the Red, Blue or Green color to enhance the picture according to the user's particular color weakness. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Setup .
U co so English - 44 Se t ting the Picture in PC Mode 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Setup . Result : The options available in the Setup group are displayed. 3 Press the ENTER button.
English - 45 Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top box and the TV source (broadcast or cable). 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Input .
M te T English - 46 This feature enables you to name the input source you have connected. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the ▲ or ▼ button to select Input . Result : The options available in the Input group are displayed.
English - 47 Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram).
Y b English - 48 You can display Teletext information at any time on your television. ☛ For Teletext information to be displayed correctly, channel reception must be stable; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service by pressing the P or P button.
English - 49 You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result : The current page counter is incremented and the page is then displayed.
English - 50 Connecting to the External Input/Output Rear of the TV VCR Decoder / Video game device Video disc player Satellite receiver ① This end can be fitted with: ◆ Three RCA connectors ( VID.
English - 51 Connecting to the S-V ideo Input The “S-VIDEO” and “AUDIO-L/R” connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Camcorder VCR ➢ To play picture and sound, both the S-VIDEO and AUDIO-L/R connectors must be used.
English - 52 Connecting to the Digital Input The “HDMI/DVI IN” and “AUDIO-L/R” connectors are used for equipment with a digital output. By inputting a high-bandwidth digital content protection high-definition picture source to these jacks, high-definition pictures can be displayed on the screen in their digital forms.
English - 53 Connecting to the Component Input ➢ The COMPONENT IN 1 (or COMPONENT IN 2 ) connectors are used for equipment with a DVD or DTV receiver output. (480i, 480p, 576i, 576p, 720p, 1080i) DTV receiver DVD Rear of the TV Connecting to the PC Input The “PC” (video) and “AUDIO-L/R” connectors are used for interfacing with your PC.
English - 54 Se t ting up Y our PC S of tw are (Windo ws only) B T ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card.
English - 55 PC/HDMI(D VI) Input Mode Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: ◆ The interlace mode is not supported. ◆ The television might operate abnormally if a non-standard video format is selected.
English - 56 Se t ting Up Y our Remote Contr ol This TV’s remote control can operate VCR, CATV , DVD, or Set-top box (STB), in addition to controlling the TV. ➢ The remote control might not be compatible with all DVD Players, VCRs and Cable boxes.
English - 57 Pr ogramming the Remote Contr ol f or Other Components D e y Admiral Aiwa Akai Audio Dynamics Bell&Howell Broksonic Candle Canon Citizen Colortyme Craig Curtis Mathes Daewoo DBX Dimen.
English - 58 Pr ogramming the Remote Contr ol f or Other Components Sylvania Symphonic Tandy Tashika Tatung Teac Technics Teknika TMK Toshiba 021, 025, 036, 056, 059 025 018, 025 006 037 025, 037, 068.
English - 59 Replacing the L amp 1 Unplug TV, then use a screwdriver to remove the screw. 2 Remove the Lamp cover. 3 Remove the screws securing the Lamp by using a screwdriver. 4 Separate the Lamp from the engine by holding the handle and pulling it out 5 To reinstall the Lamp, follow these steps in reverse order.
English - 60 Tr oubleshooting: Before Contacting S ervice Personnel T su Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer.
English - 61 Te c hnical Specif ications The descriptions and characteristics in this booklet are given for information purposes only and are subject to modification without notice. , Checking Parts Owner’s Instructions Remote Control/ AAA Batteries Replacement Lamp For purchasing a replacement lamp, ask at a nearby service center.
English - 62 Memo BP68-00478E-00Eng_0826 8/26/05 6:08 PM Page 62.
English - 63 Memo BP68-00478E-00Eng_0826 8/26/05 6:08 PM Page 63.
ELECTRONICS BP68-00478E-00 - AFTER S ALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
デバイスSamsung SP46L6HXの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samsung SP46L6HXをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung SP46L6HXの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung SP46L6HXの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung SP46L6HXで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung SP46L6HXを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung SP46L6HXの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung SP46L6HXに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung SP46L6HXデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。