SanyoメーカーPOA-PJNM01の使用説明書/サービス説明書
ページ先へ移動 of 54
P J Mast er Owner's Manual Pr ojectors and PDP Monitors Administrative T ool POA-PJNM01.
2 T rademarks The PJ Master is a trademar k of San yo Electr ic Co ., Ltd. Microsoft, Windo ws, Windows 2000, Windo ws XP , Microsoft SQL Ser ver 2000 Desktop Engine (MSDE2000A) are registered tr ademar ks of Microsoft Corpor ation. Other products or brand names in this manual are registered trademar ks or trademar ks of their respective o wner s.
3 PJ Master Owner’ s Manual Contents Chapter 1 Intr oduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Over view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Features .
4 Contents IP Address setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Customizing the display columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Changing the status column indication .
1 5 PJ Master Owner’ s Manual Chapter 1 Intr oduction.
6 Chapter 1 Introduction Overview The PJ Master is a software to manage and control tar gets (Projectors and PDP monitor s) in a network centr ally , and for ms a tree str ucture with the tar gets and ser ver s.
7 PJ Master Owner’ s Manual Operating envir onment System requir ement Ser ver : Windows XP Professional, Windows 2000 Professional Database: Microsoft SQL Ser ver 2000 Desktop Engine (MSDE 2000) Re.
8 Chapter 1 Introduction.
9 PJ Master Owner’ s Manual 2 Chapter 2 Setup.
10 Chapter 2 Setup Softwar e installation The PJ Master consists of the database software “Microsoft SQL Ser ver Desktop Engine 2000A” and administrative tool “PJ Master” provided with gr aphic user interface . Y ou need to install the above software on a top ser ver and sub ser ver s following to the steps belo w .
11 PJ Master Owner’ s Manual 4. The dialog window appears to show you the installation status and remaining time. After completing the installation, the dialog disappear s. 5. Restar t your computer . 6. After restar ting your computer , check the MSDE Ser vice Manager icon appear s on the task bar .
12 Chapter 2 Setup 3. Software License Agreement window appear s. Thoroughly read the contents. If you agree to the contents of the software license agreement, click Next .
13 PJ Master Owner’ s Manual 5. Choose Destination Location window appears. Select the location and click Next . 6. Installation Infor mation window appear s. Confirm all the installation infor mation and click Next to star t the installation. 7. When completing the installation, click Finish to close the installation window .
14 Chapter 2 Setup Service starting confirmation 1. Open Contr ol Panel, double click Administrative T ools icon and then double click Ser vice icon. The ser vice control window will appear .
15 PJ Master Owner’ s Manual 3 Chapter 3 Basic operation.
16 Chapter 3 Basic operation Launching PJ Master T o launch the PJ Master , select “PJ Master” from “Star t” - “All Progr ams” - “PJ Master”. The status window will appear on the screen. Make sure that the ser ver is connected to the networ k and assigned a cor rect IP address before launching the PJ Master .
17 PJ Master Owner’ s Manual Operation When selecting a ser ver on the tree view window , the linked tar gets or ser ver s under the selected ser ver are listed on the status list view window . Their status inf or mation are acquired from the data - base in the top ser ver and display ed on the status list view window .
18 Chapter 3 Basic operation Status display of icons Displays icon according to the target condition or ser ver condition Icon Condition Ser ver Gr ay Displays the sub ser ver and tar gets linked to t.
19 PJ Master Owner’ s Manual When the alert occurs on the tar get or server If the abnormality or connection error occur s on the target (Projector or PDP monitor), the PJ Master indicates tar get name and status column item with red to let you know the abnor mality , also changes color of icon to red.
20 Chapter 3 Basic operation Adding the top server 1. Right-click on the ser ver edit window and select Add on the popup menu. The new ser ver regis- tering window appear s.
21 PJ Master Owner’ s Manual Editing the server information 1. Select the ser ver you intend to edit ser ver information. Right-click on it and then select Edit on the popup menu. The edit ser ver window appear s. 2. Edit ser ver information on the window .
22 Chapter 3 Basic operation Editing the target information 1. Right-cl ick on the t arget and t hen s elect Edit o n the popup men u. The ed it target w indo w app ears. 2. Edi t t arget na me or IP add res s on the ed it targe t w ind o w . T he targe t t ype PJ or PD P can not be ch ang ed.
23 PJ Master Owner’ s Manual Canceling the group information T o cancel the group information, select Exit from Proc men u. Import the gr oup information from the defined file If you hav e a defined file which is expor ted by using Group Expor t command (p.
24 Chapter 3 Basic operation Column Description (example) ID code Sequence number (1,2,3,4.....) T ar get name Ser ver name or T ar get Name (Ser ver_A, Ser ver_B , Proj_01, Proj_02. PDP_10) T ar get proper ty 0: Ser ver , 1: Projector , 2: PDP (0,1,2) IP Address Assigned IP address (192.
25 PJ Master Owner’ s Manual System setting Interval time setting Setting the inter val time to update the infor mation on the status list view window . 1. Select Inter val Time Setting from System menu. The setting window will appear . 2. Enter inter val time .
26 Chapter 3 Basic operation W arning reception setting Setting war ning reception action type when the warning occur s. 1. Select W arning Reception Setting from System menu. The setting window will appear . 2. Tick the action type “Sound war ning alar m” and/or “Display warning dialog”.
27 PJ Master Owner’ s Manual Encryption setting Setting Encr yption on or off for the communication betw een ser ver s. 1. Select Encryption Setting from System menu. The setting window will appear . 2. Select either “On” or “Off ” with r adio button.
28 Chapter 3 Basic operation Customizing the display columns Changing the status column indication 1. Select Column Selection from System menu. The setting window will appear . 2. On the window , check the column name you want to display on the status list view windo w .
29 PJ Master Owner’ s Manual Font setting Changing fonts on the status list 1. Select Font Setting from System men u. The setting window will appear .
30 Chapter 3 Basic operation W arning time/temperature setting 1. Select a target on the status list view window or a ser ver on the tree view window . - When setting the multiple tar gets together , select tar gets and/or ser ver s on the status list view win- dow with pressing “Shift” or “Control” key .
31 PJ Master Owner’ s Manual Global setting The PJ Master controls tar get by sending the specified control command via the networ k. The PJ Master provides 24 kinds of basic commands for projector and 6 kinds of basic commands f or PDP monitor initially .
32 Chapter 3 Basic operation Default commands for projector TITLE TEXT POWER ON C00 POWER OFF C01 VOLUME UP C09 VOLUME DO WN C0A MENU ON MODE C1C MENU OFF MODE C1D DA TE SETTING LF D A TE yyyy/mm/dd T.
33 PJ Master Owner’ s Manual Editing the predefined command When changing the command according to the target or resetting date or time to the tar gets, take the following steps; 1. Select a target on the status list view window or a ser ver on the tree view window .
34 Chapter 3 Basic operation Condition setting example 1. Select a target on the status list view window or a ser ver on the tree view window . 2. Click or button on the tool bar or select Global Setting from Projector or PDP menu. The setting window will appear .
35 PJ Master Owner’ s Manual V iewing the status of tar get or server Displays the present status of target or ser ver in the networ k. 1. Select a target or ser ver y ou wish to display the status. 2. Select Status from Displa y menu or click button on the tool bar .
36 Chapter 3 Basic operation V iewing the logs The PJ Master provides 3 types of logs Error log, Aler t log and Command histor y log. Select each command from menu Displa y - Log. Each log window will appear . T o expor t the er ror or aler t logs as text file (csv file), click Export on its own log window .
37 PJ Master Owner’ s Manual Error message description (part of err ors) There are some error comments on the er ror detail column as follows; Error Messag e Description T ar get command send er ror . (cmd=XXX* 1 ) Failed to send the command. T ar get command receive error .
38 Chapter 3 Basic operation Reading of alert log Displays the aler t logs. Records the information when the aler t occur s and is canceled. Select Alert from Display - Log men u or click button on the tool bar . Before executing the Aler t Log command, fir st select a top ser ver , a sub ser ver or a tar get.
39 PJ Master Owner’ s Manual Changing the display for each log type Click Select on the aler tlog screen w ondow . The log type selection window will appear . Tick the type “Aler t” and/or “Status change” and then click OK . The contents on the aler t log window will change according to the abov e selection.
40 Chapter 3 Basic operation Reading of command history log Displays the command ex ecuting histor y on the own ser ver . Select Command Histor y from Displa y - Log menu or click b utton on the tool bar . Item Description Command Name of the executing command.
41 PJ Master Owner’ s Manual Updating PJ Master software updating Updates the PJ Master software in the multiple ser ver s all at once . Before taking the procedure below , set the CD-ROM provided with a new ver sion of PM Master software onto your computer .
42 Chapter 3 Basic operation Network Board firmwar e updating Updates the fir mware of the Network Board on the multiple tar gets all at once . Before taking the procedure belo w , put a supplied binar y file “****.bin” on the desktop of your computer .
43 PJ Master Owner’ s Manual Projector firmwar e updating Updates the fir mware in the multiple projectors all at once . Before taking the procedure belo w , put a supplied binar y file “****.bin” on the desktop of your computer . 1. Select a target y ou intend to update the firmware .
44 Chapter 3 Basic operation V ersion information T o displa y the v er sion of the PJ Master , Select V ersion from Help menu. The following ver sion displa y dialog will appear .
45 PJ Master Owner’ s Manual Chapter 4 Advanced setting 4.
46 Chapter 4 Advanced setting Customizing the command list The a vailable commands in the Global Setting menu are defined by the text file “Define_PJ.def ” for projector or “Define_PDP .def ” for PDP monitor . They are located on folder “Progr am” in folder “PMS”.
47 PJ Master Owner’ s Manual [DISPLA Y] SEC_MODE = EXCLUSIVE DISPLA Y ON =CF DISP ON DISPLA Y OFF =CF DISP OFF [LOGO] SEC_MODE = EXCLUSIVE LOGO ON =CF LOGO ON LOGO OFF =CF LOGO OFF [PMANE] SEC_MODE .
48 Chapter 4 Advanced setting Format of the define file Describes the oper ator s and format of the define file as follows; [GROUP LIST] COUNT = {number of the total group} GROUP1 = {group name1} * 1 GROUP2 = {group name2} : : GROUPn = {group name n} * 1 Group name is a unique identifier .
49 PJ Master Owner’ s Manual Command name Command Description PO WER ON C00 T ur ns on the tar get PO WER OFF C01 T ur ns off the tar get V OLUME UP C09 Increase sound v olume one step V OLUME DO WN.
50 Chapter 4 Advanced setting Command name Command Response Description P o wer status check CR0 or CR ST A TUS 00 P ower on 80 Stand-by 40 Count do wn 20 Cooling Lamp status check CR LAMPSTS 00 Lamp On, only available for multiple lamps model.
51 PJ Master Owner’ s Manual Cr eate the group information with a text file The PJ Master enables y ou to impor t the group information of the netw or k from the text file which defines the tar get and ser ver infor mation.
52 Chapter 4 Advanced setting 1 T op Ser ver 0 192.168.0.1 0 0 5 xxxxx1-xxxxxA 2005-05-28 12:15:00.00 2 Ser ver A 0 192.168.0.2 1 1 5 xxxxx2-xxxxxB 2005-05-28 12:15:00.00 3 Proj_01 1 192.168.0.3 2 2 5 2005-05-28 12:15:00.00 4 Proj_02 1 192.168.0.4 2 2 5 2005-05-28 12:15:00.
53 PJ Master Owner’ s Manual Select Gr oup Edit from System menu, and select Group Impor t from Proc. menu. Select the cre- ated defined file of group information. The impor ted group information will appear on the group edit window . Fur ther details of procedure , refer to item “Impor t the group information from the defined file” (p .
1AA6P1P5082--a IFBY PJ Master v . 1.2 SANY O ELECTRIC Co., Ltd..
デバイスSanyo POA-PJNM01の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sanyo POA-PJNM01をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSanyo POA-PJNM01の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sanyo POA-PJNM01の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sanyo POA-PJNM01で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sanyo POA-PJNM01を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSanyo POA-PJNM01の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sanyo POA-PJNM01に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSanyo POA-PJNM01デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
