SennheiserメーカーASA 1の使用説明書/サービス説明書
ページ先へ移動 of 22
ASA 1 Antenna Splitter Instruction manual.
.
1 Contents Important safety instructions ....... ... .............. ............... ........... ...... 2 The ASA 1 active antenna splitter .. ............ ........... .............. ......... 4 Delivery includes .. .............. .............. ......
2 Important safety instructions Important safety instructions • Read this instruction manual. • Keep this instruction manual. Always include this instruction manual when passing the device on t o third parties. • Heed all warnings and follow all instruction s.
3 Important safety instructions Intended use of the device Intended use of the ASA 1 includes: • having read and understood this instr uction manual especially the chapter “Im portant safety instructions” on page 2, • using the device wi thin the operating conditio ns and limitations described in this instruction manual.
4 The ASA 1 active antenna splitter The ASA 1 active antenna splitter The ASA 1 active antenna spl itter has been designed to enable routing of UHF antenna signals to several receivers in a multi- channel system. Up to four dive rsity receivers may be supplied with signal by only two antennas.
5 Operating elements Operating elements On/Off button Operation indicator Cable grip for cable of mains unit DC IN socket for connection o f NT 1-1 mains unit BNC socket RF OUT A R.
6 Operating elements Block diagram The below block diagram (also depicted on the base of the device) shows the signal flow in the device..
7 Putting the ASA 1 into operation Putting the ASA 1 into operation Preparing the ASA 1 for use For table-t op use, fix the device feet to the base of the ASA 1. Do not fit the device feet when mounting the ASA 1 into a 19” rack. 왘 Ensure that the base of the ASA 1 is clean and free from grease before fitting th e device feet.
8 Putting the ASA 1 into operation Stacking several ASA 1 You can stack the ASA 1 and the re ceivers on top of each other. . 왘 Stack the devices so that the recesses of the stacking elements completely engage with each other. Mounting the ASA 1 into a 19” rack Do not fit the devi ce feet when mounting the ASA 1 into a 19” rack.
9 Putting the ASA 1 into operation For rack mounting the ASA 1, you require (see “Accessories and spare parts” on page 17): • the GA 3 19“ rack adapter Rack mounting one ASA 1 왘 Unscrew and remove the two recessed head scr ews (M4x8) on one side of th e ASA 1.
10 Putting the ASA 1 into operation If you want to front mount the antennas: 왘 Use the optional AM 2 antenna front moun t kit (see “Accessories and spare parts” on page 17). I f y o u w a n t t o u s e r e m o t e a n t e n n a s ( s e e “ A c c e s s o r i e s a n d s p a r e parts” on page 17): 왘 Connect the remote antennas.
11 Putting the ASA 1 into operation Rack mounting two devices i nto the same 19” slot 왘 Place the two devices (e.g. the ASA 1 and a stationary receiver) side by side upsi de-down onto a flat surface: 왘 Secure the jointing pl ate to the devices using six recessed head screws (M 3x 6).
12 Putting the ASA 1 into operation Connecting devices to the ASA 1 and switching the ASA 1 on Connecting the antennas 왘 You can connect the following antenna types to the antenna inputs and : – two A 103 1-U or A 2003-UHF passi ve antennas – or a combination of passi ve antenna (A 1031-U or A 2003-U) and a ntenna booster (AB 3).
13 Putting the ASA 1 into operation Connecting the ASA 1 to the mains For powering the ASA 1, the connected receivers and two optional antenna boosters, yo u require the NT 1-1 mains unit (see “Accessories and spare parts” on page 17). 왘 Pass the cable of the NT 1-1 mains unit through the cable grip .
14 Putting the ASA 1 into operation Making an 8-channel system using the ASA 1 There are two ways to link two ASA 1 together to create a 1-to- 8 diversity splitter: First possibility: T w o antennas supply an 8-channel system * AB-3 antenna boosters are only required for longer antenna cables (from approx.
15 Putting the ASA 1 into operation Second possibility: Linking tw o 4-channel systems * AB-3 antenna boosters are only required for longer ant enna cables (from approx .
16 Cleaning the ASA 1 Cleaning the ASA 1 왘 Before cleaning, dis connect the ASA 1 from the mains (see page 13). 왘 Only use a slig htly damp cl oth to clean the devi ce.
17 Accessories and spare parts Accessories and spare parts The following ASA 1 accessories are available from your Sennheiser partner: Cat. No. Accessory/spar e part 503158 NT 1-1 EU Mains unit for po.
18 Specifications Specifications Ty p e a p p r o v a l s ASA 1 antenna splitter 2 x 1:4 or 1 x 1:8, active Antenna cable 8 items, 50 cm, BNC Frequency range 500 to 870 MHz at –3 dB Amplification In A – Out A 0 ± 1 dB Amplification In A – Out A1 .
19 Manufacturer Declarations Manufacturer Declarations Wa rr a nt y Sennheiser electronic GmbH & Co. KG gives a war ranty of 24 months on this product. Additional warranty con ditions can be found on our websit e at www.sennheiser.com under “Service & Su pport” and “T erms of Wa rr an ty ”.
Sennheiser electronic GmbH & Co. KG Printed in Germany Am Labor 1, 30900 W edemark, Germany Publ. 01/09 www.sennheiser.com 532034/A01.
デバイスSennheiser ASA 1の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Sennheiser ASA 1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSennheiser ASA 1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sennheiser ASA 1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sennheiser ASA 1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sennheiser ASA 1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSennheiser ASA 1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sennheiser ASA 1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSennheiser ASA 1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。