SiemensメーカーACS3110の使用説明書/サービス説明書
ページ先へ移動 of 20
SiPass standalone ACS3110 User manual Fire Safety & Security Products Siemens Building Technologies.
Liefermöglichkeiten und tec hnische Änderungen vorbehalten. Data and design subject to change without not ice. / Suppl y subject to availability. © 2005 Copyright by Siemens Building Technologies AG Wir behalten uns alle Rechte an diesem Dokument und an dem in ihm dargestellten Gegenstand vor.
1 Basic inform ation .................................................................................... 5 2 Access modes ......................................................................................... 5 2.1 Tag types ......................
.
Basic information 1 Basic information SiPass standalone is a complete acce ss control system for one door an d up to 500 cardholders. SiPass stand alone uses 125 kHz proximity technology. For gainin g access, it is sufficient to hold the badge close to the reader.
Badge type 3 Badge type 3.1 User badge User Can be used in ”Access” mode only. Special Can be used in both, ”Access” and ”Ni ght lock” mode.
LED indicators 4 LED indicators Read indi cat ion (yel lo w ) Open (green) Closed (r ed) Night l ock ( red) Add (r ed) V oi d (red) Program (r ed) Fig. 1 LED indicators 5 Overall time-out In Program Mode, after 30 secon ds of inactivity, an error tone sounds, and norm al operation resumes.
Security measures 6 Security measures 6.1 Missing tag For safety precautions the user is strong ly advised to keep records of the ID num- bers and functions of all badges and the names of their users. In case of loss, the specific badges can be voided from memory by entering the badge number on the SiPass standalone Remot e Programmer.
Wake up: Declaring the Program Maste r 7 Wake up: Declaring the Program Master When powering up a SiPass standalone for the first time, one selected ba dge must be presented, to be declare d as the Program Master. The Program Maste r may be regarded as a kind of master of masters; it will be instrumental in e nabling all other masters and badges.
Declaring the m asters 8 Declaring the masters SiPass standalone has 3 prog ramming modes which need to be processed before normal operation. When going through these mode s the first time, you can directly declare the re- spective mast ers.
Change Program Master 9 Change Program Master This procedure replaces the old Prog ram Master by a new one. The old Program Master is thereby voided from the SiPass standalone memory and the new badge is declared as Program Master instea d. Th is is helpful if e.
Add new user badge 10 Add new user badge Badges which shall be gra nted access mu st first be stored in the SiPass stand- alone memory. The Add Master allows new badge s to be added which, from then on, will be granted access. Any badge can be added, except Master badges a nd badges which are already i n memory.
Void user badge 11 Void user badge Badges which shall be de nied access must first be voided from the SiPass stand- alone memory. The Void Master allows badges to be voided whi ch, from then on, will be denied access.
Set Night Lock Mode 12 Set Night Lock Mode In night lock mode, normal badges will no t be granted access. Only Special User Badges are granted access in this mod e.
Unset Night Lock Mode 13 Unset Night Lock Mode Only the Night Lock Master can switch Night Lock off. When pres enting the Night Lock Master to unset Night Lock, acce ss is granted at the same tim e. This function is intended for perso ns wh o are authorized to enable acce ss for oth- ers, for example to unlock an office buil ding in the morning.
Add Special User Badge 14 Add Special User Badge Special User Badges are granted a ccess both, during Night Lock and duri ng Nor- mal Operation. Unlike the Night Lock Mast er, they have no effect on Night Lock status. Special User Badges must be add ed by us ing the Add Master while SiPass stand- alone is in Night Lock mode.
Declare Remote Program mer 15 Declare Remote Programmer To store a Remote Programmer in the SiPass standalone memory, first show the Program Master to enter Program mode, then present the Remote Programmer while in Program mode. After this, SiPass standalone will resume its normal opera- tion.
Void badge with a Remote Programmer 16 Void badge with a Remote Programmer Using a Remote Programmer, bad ges or Remote Programmers can be voided by their number.
Appendix 17 Appendix 17.1 Tag registration list ID Number Date Masters Program Master Void Master Add Master Nightlock Master Remote Programmers Users 19 Siemens Building Technologies Fire Safety & Security Products 02.
Issued by Siemens Building Technologies Fire & Security Products GmbH & Co. oHG D-76181 Karlsruhe www.sbt.siemens.com © 2005 Copyright by Siemens Building Technologies AG Data and design subject to change without notice. Supply subject to availability.
デバイスSiemens ACS3110の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Siemens ACS3110をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSiemens ACS3110の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Siemens ACS3110の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Siemens ACS3110で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Siemens ACS3110を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSiemens ACS3110の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Siemens ACS3110に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSiemens ACS3110デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。