Smith Coronaメーカー200の使用説明書/サービス説明書
ページ先へ移動 of 20
Instruction Manual Designs and specifications are subject to change without notice. Wordsmith 200 ELECTRONIC TYPEWRITER.
2 PARTS DESCRIPTION PLA TEN KNOB TOP COVER P APER BAIL P APER RELEASE LEVER POWER SWITCH PLA TEN PRINT CARRIER PRINT COVER LCD LCD CONTRAST ADJUSTER KEYBOARD COVER LCD POWER SWITCH PRINT WHEEL PRINT W.
3 KEYBOARD LAYOUT 18. * CODE 19. * SP ACE 20. * CORRECTION / * WORD CORRECTION 21. * INDEX / * REVERSE INDEX 22. * RETURN / * RELOCA TION 23. * ESC / * INSERT 24. * CURSOR RIGHT / * EXPRESS 25. * BACK SP ACE / * MICRO BACKSP ACE 26. * CONTINUOUS UNDERLINE 27.
4 CONTENTS CONNECT POWER ........................... 4 Setting ..................................................... 4 CHANGING .......................................... 5 Changing The Ribbon Cassette .............. 5 Changing The Print Wheel .......
5 CONNECT POWER Power cord is located in the compartment located at the rear of the typewriter . And the power switch is located on the right side of typewriter near the rear . 1) Pull down the rear compartment door and connect the power cord to a proper AC outlet.
6 CHANGING Changing The Ribbon Cassette 1) Move the print carrier to the center of the platen using the SP ACE or . 2) Hold the ribbon cassette on both sides and lift up the front portion (where the ribbon is exposed) to remove the cassette.
7 Changing The Correction Tape 1) Move the print carrier to the center of the platen using the SP ACE or . 2) T o replace the correction tape, lift out the typing ribbon cassette (see Changing The Ribbon Cassette) and remove the two spools of the lift off tape by pulling them outwards.
8 BASIC FEATURES Selecting Pitch There are three pitches available for typing the CODE + 4 (PITCH) key is used to change the typing pitch. When the typewriter is turned on. PICA mode is selected. The selection sequence is the following: PICA ELITE MICRO PICA The chosen pitch will be displayed.
9 • Margin Release T o move the carrier or type a character beyond margins press the CODE + 1 (MARGIN RELEASE) key . • Hot Zone The hot zone starts six (6) spaces before the right margin. A beep will sound when the hot zone is reached. Shift and Shift Lock T o type uppercase characters or symbols, press either the left or right key .
10 Backspacing There are three different backspace function. • Backspace T o move the carrier or cursor one space backward, press the key . • Micro Backspace Press the CODE + MICRO key to move the carrier backward by a micro step (1/60 inch) • Express T o move carrier or cursor to the left margin, press the CODE + EXPR key .
11 TAB T o set a tab, move the carrier to the desired position and press the T AB S key . T o clear a tab, move the carrier to the tab position to be cleared and press the CODE + T AB C key . T o clear all tab positions, press the CODE + T AB C key for half a second.
12 CORRECTION Y our typewriter has a one line correction memory . Y ou can automatically correct any mis-typed character within the correction memory . Correcting One Character T o correct the last typed character , press the X key . The carrier will then be backspaced and the character will be erased.
13 ADVANCED OPERATION There are three advanced modes in your typewriter: AUT O, LP and JUST . The mode is changed circularly when you press the CODE + 8 (MODE) key .
14 WORD PROCESSOR MODE Pre-Description The WP mode will make your typing easier and more efficient. Repetitive phrases, terminology and entire letters can be stored, edited and recalled (printed) at will. There are six sub-modes in WP mode. They are dp, np, edit, prn, Is and del.
15 4. prn (Print) If you press the 4 key , you an print a file. The first file name will be displayed. Press the RETURN key to select or the cursor key ( , ) to change the file. utilisez le curseur et RET nom: aaa After selecting the printing file, the following message will be displayed.
16 1. Mark Begin 1) Move the cursor to the beginning of the text you want to mark. 2) Press the CODE + F (MARK) key . 2. Mark End 1) After having marked the beginning, move the cursor to the end of the text you want to mark. 2) Press the CODE + F (MARK) key .
17 5. Cursor Movement • One character left: • One character right: • One line up: INDEX • One line down: CODE + REV INDEX • T o the first column: CODE + EXPR • T o the end of: CODE + RELOC of the current line the current line • T o the start of file: CODE + T • T o the last line: CODE + E of the file 6.
18 TROUBLE SHOOTING If any operating difficulties arise, check the list below before returning your typewriter for service. 1. T ypewriter remains at a stand with the - Make sure the power cord is still power switch set to on. plugged in. 2. Printing is faint or does not appear .
19 SPECIFICATION - P APER WIDTH 12 “ (305 mm) - PRINTING WIDTH 9 “ (229 mm) - DAISY WHEEL 100 spokes - PRINTING SPEED up to 12 cps - PRINTING PITCH 10, 12, 15 - LINE SP ACE 1, 1 1/2, 2 - CORRECTIO.
20 Smith Corona Corporation 842 Bennie Road P.O. Box 2090 Cortland, NY 13045-2090 1-800-448-1018 7301171.
デバイスSmith Corona 200の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Smith Corona 200をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSmith Corona 200の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Smith Corona 200の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Smith Corona 200で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Smith Corona 200を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSmith Corona 200の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Smith Corona 200に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSmith Corona 200デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。